ClearFog CN9130 Pro Quick Start Guide
Revision and Notes
Date | Owner | Revision | Notes |
|---|---|---|---|
Dec 7, 2021 |
| 1.0 | Initial release |
Feb 9, 2025 | Yazan Shhady | 1.1 | Adding detailed information on the mPCIe connectors and their corresponding SIM holder interface mapping |
Table of Contents |
| ||
Introduction
The following quick start guide provides background information about the ClearFog Pro product which use the CN9130 System on module.
The guide will give a technical overview about the product and by the end of it you should be able to boot an operating system and begin testing your application.
Hardware Setup
Product Specifications
SOM Model | OCTEON CN9130 |
|---|---|
Processor | 64-bit Cortex A72 |
Core Frequency | up to 2.2GHz |
Memory & Storage | 64bit DDR4 W/O ECC, Up to 8GB at 2400MT/s |
| M.2 |
| uSD and 8GB eMMC |
Connectivity | 2 x mSATA/mPCIE |
| 1 x USB 3.0 port |
| 1 x Port dedicated Ethernet |
| 5 x Port switched Ethernet |
| 1 x SFP+ 10GbE |
I/O & Misc. | Not supported |
| GPIO Header (mikroBUS) |
| Indication LEDs |
| PoE expansion header |
| RTC Battery |
| FTDI (Console Only)/Debug Header |
| JTAG Header |
OS Support | Linux Kernel 4.x, OpenWRT/LEDE, Yocto |
Power | Wide range 9V- 32V |
| Advanced Power Control |
| Fan Control |
Dimensions | 225mm x 100mm (PCBA) |
| 226mm x 104mm x 33mm (Enclosed) |
Enclosure | Optional metal enclosure |
|
Supported with CN9130 SOM. For more detailed information about our CN9130 SOM series please visit this user manual : CN9130 SOM Hardware User Manual .
Block Diagram
The following figure describes the ClearFog Pro Block Diagram.
SolidRun Ltd.