SD Card
You will need to download an operating system for the HummingBoard Pulse/Ripple and flash in to a blank SD card in order to use the system. You can download official release distributions and find flashing instructions at our software page. If you need help to flash the SD card please see our article Flashing an SD Card .
When using i.MX8M SOM
Boot Select
Before powering up the board for the first time it is recommended to select the boot media. In order to configure the boot media to please reference the below diagram :
The black rectangle represents the switch position.
Revision 2.3 and up
Please note , after HummingBoard Pulse/Ripple revision 2.3 and up the dip switch has been changed and the following description applies.
When using i.MX8M Mini SOM
Boot Select
Before powering up the board for the first time it is recommended to select the boot media. In order to configure the boot media to please reference the below diagram :
When using i.MX8M Plus SOM
Boot Select
Before powering up the board for the first time it is recommended to select the boot media. In order to configure the boot media to please reference the below diagram :
