HummingBoard Ripple & RZ/G2LC SOM Quick Start Guide
Introduction
The following quick start guide provides background information about the HummingBoard RZ/G2LC.
The guide will give a technical overview about the product and by the end of it you should be able to boot an operating system and begin testing your application.
Revision and Notes
Date | Owner | Revision | Notes |
---|---|---|---|
Nov 23, 2022 | Yazan Shhady | 1.0 | Initial release |
Feb 28, 2023 | Yazan Shhady | 1.1 | Updated SW Versions |
May 15, 2023 | Yazan Shhady | 1.2 | Updated SD SW Versions |
Nov 18, 2024 | Yazan Shhady | 1.3 | Updated the documentation to reflect the eMMC speed mode as HighSpeed |
Table of Contents |
Hardware Setup
Product specifications
| HUMMINGBOARD RZ/G2LC |
---|---|
I/Os | 2 x USB 3.0 1 x MIPI-CSI |
Networking | 1 x Ethernet RJ45 10/100 |
Processor | Renesas RZ/G2LC Dual core Arm Cortex A55 up to 1.2GHz + Cortex M33 |
Memory & Storage | Up to 2GB DDR4 |
Display | micro HDMI |
Misc. | 1 x Reset button |
Development and Debug interfaces | Micro USB |
Power | 7V – 36V |
Expansion card I/Os | mikroBUS header |
Temperature | Commercial: 0°C to 70°C |
Dimensions | PCBA: 100 x 70mm |
Enclosure | Extruded aluminium |
|
[*] eMMC Speed Mode: HighSpeed (up to 52MHz)
Supported with RZ/G2LC SOM. For more detailed information about our SOM-RZ/G2LC series please visit this user manual : RZ/G2LC SOM Hardware User Manual .
Block Diagram
The following figure describes the RZ/G2LC Block Diagram.
Visual features overview
Please see below the features overview of the connector side of the HummingBoard RZ/G2LC
SolidRun Ltd.