HummingBoard Edge Quick Start Guide
Revision and Notes
Date | Owner | Revision | Notes |
|---|---|---|---|
Nov 14, 2021 |
| 1.0 | Initial release |
Table of Contents |
| ||
Introduction
The following quick start guide provides background information about the HummingBoard Edge product which use the i.MX6 System on module.
The guide will give a technical overview about the product and by the end of it you should be able to boot an operating system and begin testing your application.
Hardware Setup
Product Specifications
SOM Model | NXP i.MX6 based Solo to Quad Core SOM |
Memory & Storage | Up to 2GB DDR3* |
| uSD |
Connectivity | 1xRJ-45** |
| 4*USB 2.0 |
| Mini-PCIe with SIM card holder |
Media | HDMI-Out |
| LVDS |
| Analog Audio |
| MIPI-CSI-2 and MIPI-DSI |
| Parallel Camera (on GPIO header) |
I/O | Reset Button |
| 36 pins GPIO Header |
| RTC with Battery |
| IR |
OS Support | Linux |
Dimensions | 102mmx69mm |
Power | 7V-36V, 5.5mm in (Twist and Lock mechanism) |
Environment | Optional metal enclosure |
|
Supported with i.MX6 SOM. For more detailed information about our SOM-i.MX6 series please visit this user manual : i.MX6 SOM Hardware User Manual.
Please Note
(*) RAM type and speed dependent on SOM
(**) 1000 Mbps link is limited to 470Mbps actual bandwidth due to internal chip buses
Block Diagram
The following figure describes the HummingBoard Edge Block Diagram.
Visual features overview
Please see below the features overview of the connector side of the HummingBoard Edge.
Print side connector overview of the HummingBoard Edge.
Software Setup
Cable setup and prerequisites
Here is what you will need to power up the board:
SolidRun Ltd.