i.MX8M Plus SOM Hardware User Manual

Revisions and Notes 

Introduction

This User Manual relates to the SolidRun i.MX8M-PLUS series , which includes;

• Dual ARM A53 (1.8GHz)

• Quad ARM A53 (1.8GHz)

SolidRun’s SR-SOM- i.MX8M family is a high-performance microsystem on module (S.O.M.) based on the highly integrated NXP i.MX8M family of products including the i.MX8M, i.MX8M-Mini and i.MX8M-Plus.

Highlighted Features

• Ultra-small footprint SOM (47x30mm) including three board-to-board connectors (250 total pins number).

• NXP i.MX8M-PLUS SoC (supports dual, quad lite and quad versions)

  • Up to quad Cortex A53 and up to 1.8GHz

  • Cortex-M7 subsystem processor supports real time tasks.

  • Neural Processing Unit (NPU) operating at up to 2.3 TOPS.

  • Dual Image Signal Processors and two camera inputs for an effective Vision System.

  • Video encode (including h.265) and decode, 3D/2D graphic acceleration, and multiple audio and voice functionalities.

  • Robust control networks supported by dual CAN FD and dual Gigabit Ethernet with Time-Sensitive Networking (TSN).

  • High industrial reliability with DRAM inline ECC and ECC on on-chip RAM.

• LPDDR4 memory in x32 configurations supports up to 8GB and up to 4.0GT/s

• Two Gigabit Ethernet interfaces based on Analog Device’s ADIN1300 chip.

• Wi-Fi (802.11a/b/g/n/ac) + BT (5.0) Murata’s certified module (Cypress chipset)

• On board MIPI-CSI interface supporting Basler’s camera’s modules.

• On board LVDS connector supporting LCD and touch screen.

• On board power and terminal interfaces supporting standalone operation.

• Power management devices

Supporting Products

The following products are provided from SolidRun both as production level platforms and as reference examples on how to incorporate the SOM in different levels of integration:

• HummingBoard Pulse & i.MX8M Plus SOM Quick Start Guide

• HummingBoard Mate & i.MX8M Plus SOM Quick Start Guide

Description

Block Diagram

The following figure describes the i.MX8M-PLUS Blocks Diagram.

Open

Features Summary

Following are the features summary of the SOM. Notice that some of the features are pinout multiplexed (please refer to the pin mux table below and the NXP i.MX8M-PLUS data sheets):

• NXP i.MX8M PLUS series SoC (Dual/Quad Lite/Quad ARM® Cortex™ A53 Processor, up to 1.8 GHz)

• Cortex-M7 (800MHz) subsystem processor.

• Up to 8GByte LPDDR4 memory and up to 4.0GT/s

• Eight bits eMMC 5.1 memory.

• I2C EEPROM.

• HDMI 2.0a, 720 x 480p60, 1280 x 720p60, 1920 x 1080p60, 1920 x 1080p120 and 3840 x 2160p30

• 4-lanes MIPI-DSI interface

• Two 4-Lanes LVDS interfaces (One of the interfaces support on-SOM connector for an LCD and touch screen)

• Two 4-lanes MIPI CSI-2 (One of the interfaces is connected to an FPC connector supporting Basler’s MIPI cameras)

• Two 10/100/1000 Mbps Ethernet PHY supporting 1588 standard

• One Gigabit Ethernet controller with support for TSN

• Wi-Fi (802.11a/b/g/n/ac) + BT (5.0) Murata’s certified module

• Two USB 3.0 Host and Device

• Single PCIe Gen 3 interfaces

• Four bits SD interface

• Single eSPI interface.

• Single QSPI interface supporting up to 4 data bits

• Up to three Synchronous Audio Interfaces.

• Up to four Serial interfaces.

• Up to 2 CAN-FD.

• Power:

  • A single 5.0V input using B-t-B connector

  • A single 5.0V input using an On-SOM connector (Standalone operation)

  • 3V output to support carrier’s digital interfaces 

Core System Components

i.MX8M PLUS SoC Family

The i.MX 8M Plus family focuses on machine learning and vision, advanced multimedia, and industrial IoT with high reliability. It is built to meet the needs of Smart Home, Building, City and Industry 4.0 applications. The following figures show the functional modules in the i.MX 8M Plus processor system.

Open

The following figures describes the i.MX8M-PLUS supported modules

Open

Memory

The i.MX8M-PLUS SOM supports varieties of memory interfaces for booting and data storage. The following figure describes the IMX-8 SOM memory interfaces.

Open

LPDDR4

• Up to 8GB memory space.

• 32 Bits data bus.

• Up to 4000 MT/s.

• Supports D1, D2 and D4 die chips (Two CS).

• Support various low power modes, clock and power gated operation.

• Support Self-Refresh mode.

eMMC NAND Flash

• Up to 64GB memory space.

• 8 Bits data bus.

• Support MMC standard, up to version 5.1.

• Up to 416 Mbps of data transfer for MMC cards using 8 parallel data lines in SDR mode.

• Up to 3200 Mbps of data transfer for MMC cards using 8 parallel data lines in DDR mode.

• uSDHC-3.

• Can be used as BOOT NVM *

Quad Serial NOR Flash (SOM)

• Each channel can be configured as 1/2/4-bit operation.

• Support both SDR mode and DDR mode

• No reset

• QSPIA/nSS0.

• Can be used as BOOT NVM *

EEPROM (SOM)

• 1Kb EEPROM

• ON-Semi’s CAT24AA01TDI or compatible

• I2C1

• Address 0X50 (7 bits format)

• Stores SOM’s configurations.

Micro-SD (Carrier)

• Optional on Carrier board

• IMX-8 uSDHC-1.

• Implements 4 data bits.

• Support SD/SDIO standard, up to version 3.0.

• Up to 400 Mbps of data transfer in SDR mode and up to 800 Mbps of data transfer in DDR mode using 4 parallel data lines.

• Can be used as BOOT NVM *

Serial NOR Flash (Carrier)

• Optional on Carrier board

• 1 bits data bus.

• eSPI2/nSS0

• Can be used as BOOT NVM *

Please Note

(*) All boot configuration signals are available on the SOM connector.

10/100/1000 MBPS ETHERNET PHY

The SOM supports two Giga Ethernet interfaces. Both interfaces are connected to Analog Device’s ADIN1300 PHY.

• Open

  

  RGMII interface.

• 3 Ethernet interfaces for 1000BASE-T, 100BASE-TX, and10BASE-T.

• Analog Device’s ADIN1300 PHY.

• One Gigabit Ethernet controller with support for Energy Efficient Ethernet (EEE), Ethernet AVB, and IEEE 1588

• One Gigabit Ethernet controller with support for TSN in addition to EEE, Ethernet AVB, and IEEE 1588.

WI-FI (11AC/B/G/N) BT (5.0 BLE)

The following figure describes the WI-FI and BT support in the i.MX8M-Plus SOM.

Open

The WI-FI & BT module is Murata’s 1MW module Based on Cypress CYW43455. hip. The WI-FI main features are:

• Operate at ISM frequency Band (2.4/ 5 GHz)

• IEEE Standards Support 802.11ac, 802.11a, 802.11b, 802.11g and 802.11n

• WI-FI over SDIO-1 interface

• BT 5.0 BR/EDR/LE

• BT over UART-1 Interface

• Global certification.

MIPI-CSI

The i.MX8M-PLUS SOM supports a 4-Lanes MIPI CSI-2 interface. A 28 pins FPC connector on the SOM board enables a direct connection to Basler’s MIPI cameras. The following figure describes the interface signals.

Open

• CSI channel 2.

• Implements all three CSI-2 MIPI layers.

• Scalable data lane support, 1 to 4 Data Lanes.

• When one camera is used, support up to 12MP@30fps or 4kp45.

• When two cameras are used, each supports up to 1080p80.

• Virtual Channel support.

LVDS Interface

The i.MX8M-PLUS SOM supports a 4-Lanes LVDS interface. A 24 pins connector on the SOM board enables connection to a touch screen LCD. The following figure describes the interface signals.

Open

• LVDS channel 2.

• LVDS Tx display and Pixel Mapper.

• Up to 80MHz pixel clock and LVDS clock implying up to 560Mbps LVDS data rate (4 Lanes).

• supports resolutions up to approximately 1366x768p60.

External Interfaces

General

The SOM incorporates three Hirose DF40 board-to-board headers.

The selection of the Hirose DF40 is due to the following criteria:

• Miniature (0.4m pitch)

• Highly reliable manufacturer

• Availability (worldwide distribution channels)

• Excellent signal integrity (supports 6Gbps)

  • Please contact Hirose or SolidRun for reliability and test result data.

• Mating height of between 1.5mm to 4.0mm (1.5mm to 3.0mm if using 70-pin Board-to-Board header). SR-SOM-MX8M-PLUS headers are fixed, the final mating height is determined by carrier implementation

PCIe

The i.MX8M-PLUS SOM supports a single PCIe interfaces. The following figure describes the PCIe interfaces.

Open

The PCIe main features are:

• On board coupling capacitors for TX and CLK.

• The i.MX8M-PLUS generates the PCIe clock.

• PCI Express Base Specification 4.0 compliance.

• 2.5Gb/s, 5.0Gb/s, and 8.0Gb/s Serializer/Deserializer.

• PHY Interface for the PCI Express Architecture, Version 4.2 compliance.

• Supports Spread Spectrum Clocking in Transmitter and Receiver.

• Receiver Detection.

Please note

The PCIe clock is generated in the i.MX8M-PLUS, check the datasheet if the jitter characteristics meet the application requirements. 

USB 3.0

The i.MX8M-PLUS supports two USB 3.0 interfaces. The following figure describes the USB interfaces.

Open

The USB main features are:

• USB1 and USB2 are directly connected to the connectors (No HUB).

• Complies with USB specification rev 3.0 (xHCI compatible).

• USB dual-role operation and can be configured as host or device.

• Super-speed (5 Gbit/s), high-speed (480 Mbit/s), full-speed (12 Mbit/s), and low speed (1.5 Mbit/s) operations.

• Supports four programmable, bidirectional USB endpoints.

• The USB 3.0 module operates in following modes:

  • Host Mode: SS/HS/FS/LS

  • Device Mode: SS/HS/FS

• Power control signal are not part of the USB module, any available GPIO can be used.

MIPI CSI

The following figure describes the CSI interface.

Open

• CSI channel 1.

• Implements all three CSI-2 MIPI layers.

• Scalable data lane support, 1 to 4 Data Lanes.

• When one camera is used, support up to 12MP@30fps or 4kp45.

• When two cameras are used, each supports up to 1080p80.

• Virtual Channel support

• ISP support

MIPI DSI

The following figure described the DSI interface.

Open

The DSI main features are:

• MIPI DSI Standard Specification V1.01r11.

• Maximum resolution ranges up to WQHD (1920x1080p60, 24bpp).

• Supports 1, 2, 3, or 4 data lanes.

• Complies with Protocol-to-PHY Interface (PPI) in 1.0Gbps / 1.5Gbps MIPI DPHY.

• Virtual Channel support.

Audio

The i.MX8M-PLUS SOM supports up to three Audio channels, SAI2, SAI3 and SAI5. It also supports an SPDIF interface. The following figure describes the audio interface.

Open

The Audio main features are:

• SAI2 and SAI3 supports RX and TX

• SAI5 supports two RX channels

• SPDIF input and output, including a raw capture input mode.

• HiFi4 Audio DSP, operating up to 800 MHz

• Supporting I2S, AC97, TDM, codec/DSP, and DSD interfaces.

• All ports support 49.152 MHz BCLK.

• 8-channel PDM mic input.

HDMI

The i.MX8M-PLUS supports HDMI interface. The following figure describes the HDMI interface.

Open

The HDMI main features are:

• On board Level translation for DDC channel and HDP signal.

• HDMI 2.0a Tx supporting one display.

• Resolutions of: 720 x 480p60, 1280 x 720p60, 1920 x 1080p60, 1920 x 1080p120,3840 x 2160p30.

• 32-channel audio output support.

UART

The i.MX8M-PLUS SOM can support up to 4 UART interfaces. The following figure describes the UART interfaces.

Open

The UART interfaces main features are:

• UART 1 is connected directly to the WI-FI/BT Modem to support the BT. It is available on the SOM B-t-B connector as an ALT function of SAI2.

• UART 2 supports TX, RX and is used as terminal interface of the i.MX8M-PLUS. It is also available on J5002 when the SOM is operating in a standalone mode.

• UART 3 Supports TX, RX, CTS and RTS.

• UART 4 support TX and RX.

• High-speed TIA/EIA-232-F compatible, up to Mbit/s.

• 9-bit or Multidrop mode (RS-485) support (automatic slave address detection).

• RS-485 driver direction control via CTS_B signal.

• Auto baud rate detection (up to 115.2 Kbit/s).

• DCE/DTE capability.

eSPI

The i.MX8M-PLUS SOM supports an eSPI interface. The following figure describes the eSPI interface.

Open

• IMX-8’s eSPI channel 2.

• Single chip select nSS0.

• Master/Slave configurable.

I2C

The i.MX8M-PLUS supports up to four I2c Interfaces. The following figure describes the I2C interfaces.

Open

The I2C main features are:

• I2C-1 is used only on the SOM. It is connected to the SOM EEPROM and PMIC connector.

• I2C-2 and I2C-3 are available on the connector by default.

• I2C-4 is connected to the On-SOM FPC connector supporting Basler’s camera.

• Multimaster operation.

• In Standard mode, I2C supports the data transfer rates up to 100 kbits/s.

• In Fast mode, data transfer rates up to 400 kbits/s can be achieved.

 uSD

The uSD supports the following features:

• IMX-8 uSDHC-1.

• Implements 4 data bits.

• Support SD/SDIO standard, up to version 3.0.

• Up to 400 Mbps of data transfer in SDR mode and up to 800 Mbps of data transfer in DDR mode using 4 parallel data lines.

• 8V or 3.3V support integrated support.

• Integrated power switch on SOM.

B2B Connector’s Signal Description

J5001