Bedrock R8000 | R7000 Front panel LEDs documentation

This Page Includes the Front panel LEDs naming and behavior documentation:

1. POWER LED:

   Open

   

   This LED indicates that the Device is powered on.
   When device is powered on the White LED is turned on during the early stages of BIOS initialization.
   NOTE: This LED is controlled By a GPIO pin, and therefore it will have some delay from the moment the power plug is inserted.

2. S (Status) LED:

   Open

   

   This LED shows the POST status of the device. When device is in PRE-POST status LED will have yellow color (up to 40 seconds)
   After POST, color changes to green indicating the device successfully posted (Exiting BIOS menu or booting an OS).
   NOTE: During the DDR training stage the LED with have the yellow color, for more verbose info during the process connect a serial console: Using serial console with BedrockPreview

3. Storage LED:

   Open

   

   This LED indicates activity on the main NVME device (NVME0).

4. WI-FI / Bluetooth LED:

   Open

   

   This LED Indicates WIFI / Bluetooth is ON (works only on Windows due to driver compatibility).

5. LTE LED:

   Open

   

   This LED Indicates LTE is ON (works only on Windows due to driver compatibility).