...
How to use Bedrock
...
3D model
Download Bedrock V3000 Basic 3D model (Zipped STEP file)
or Bedrock R8000 4X25 3D model (Zipped STEP file)Enable one of the enclosure types
Enclosure tile
Enclosure 30W
Enclosure 60W
Enable / disable Antennas
| Info |
|---|
The 3D model is for integration. It is accurate externally , with no internal features. |
Installation notes
See also: Bedrock Mounting options
Orientation
Bedrock 30W and Bedrock 60W should be installed in vertical position with at least 2 cm clearance below and above for airflow.
...
Bedrock Tile should have at least one of the walls thermally coupled to a cold plate.
Mounting notes
Rear panel: 2x M3 threadings. Depth 3mm
Rear panel can be used with
Bedrock wall mounting bracket
Bedrock DIN rail bracket
Custom mounting fixture
...
Bottom panel: 2x M4 threadings, depth 6mm
Bottom panel should not be used for direct mounting, but can be used with Bedrock foot.
...
Tile: 6x M4 threadings depth 3.5 mm on each wall
The threaded holes are intended for easy attachment to a cold plate for conduction cooling. Either of the walls can be attached at any orientation.
...