Download Bedrock V3000 3D model (Zipped STEP file)
or Bedrock R8000 4X25 3D model (Zipped STEP file)
Enable one of the enclosure types
Enclosure tile
Enclosure 30W
Enclosure 60W
Enable / disable Antennas
The 3D model is for integration. It is accurate externally , with no internal features. |
See also: Bedrock Mounting options
Bedrock 30W and Bedrock 60W should be installed in vertical position with at least 2 cm clearance below and above for airflow.
Other mounting orientation can be considered with active cooling. |
Bedrock Tile should have at least one of the walls thermally coupled to a cold plate.
Rear panel can be used with
Bedrock wall mounting bracket
Bedrock DIN rail bracket
Custom mounting fixture
Bottom panel should not be used for direct mounting, but can be used with Bedrock foot.
The threaded holes are intended for easy attachment to a cold plate for conduction cooling. Either of the walls can be attached at any orientation.
It is also possible to attach using another fixture e.g. a custom omega bracket.
It is advised to apply thermal interface material between wall and cold plate on the entire wall area.
