Versions Compared

Version Old Version 8 New Version 9
Changes made by

Shahar Fridman

Yazan Shhady

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Introduction

The following quick start guide provides background information about the HummingBoard Extended Pro RZ/V2L.

The guide will give a technical overview about the product and by the end of it you should be able to boot an operating system and begin testing your application.

...

 

HUMMINGBOARD Ripple RZ/V2L

I/Os

2 x USB 2.0
1 x MIPI-CSI
1 x Digital audio (Riser interface fpC connector)

Networking

2 x Ethernet RJ45 10/100/1000
1 x 802.11 a/b/g/n/ac WiFi and Bluetooth (2.4/5 GHz)

Processor

Renesas RZ/V2L Solo/Dual core Arm Cortex A55 up to 1.2GHz + Cortex M33

Memory & Storage

up to 2GB DDR4 RAM
Starting from 16GB eMMC
MicroSD

Display

HDMI (ADI bridge MIPI-DSI to HDMI)

Misc.

1 x Reset button
1 x Configurable push button
3 x LED indicators
RTC

Development and Debug interfaces

Micro USB

Power

7V – 36V

Expansion card I/Os

mikroBUS header
Mini Pcie with SIM holder

Temperature

Commercial: 0°C to 70°C

Industrial: -40°C to 85°C

Dimensions

PCBA: 100 x 70mm

Enclosure 120 x 80 x 30mm

Enclosure

Extruded aluminium

 

Buy Now

Info

Supported with RZ/G2LC V2L SOM. For more detailed information about our SOM - RZ/G2LC V2L series please visit this user manual : RZ/G2LC V2L SOM Hardware User Manual .

Block Diagram

The following figure describes the RZ/G2L Block Diagram.

...

The following shows how to set the switches on the boot source selector:

...

Info

Please Note:

The black rectangle represents the switch position.

...

  1. Downloading the Debian image
    Download the Debian image by running the following command on your Linux/Windows PC:

    Code Block
    wget https://solid-run-images.sos-de-fra-1.exo.io/RZ/rzg2lc_build/20231122-6391518/rzv2l-solidrun-sd-debian-6391518.img.xz

  2. Writing the image to the SD card
    Use the following commands for writing the image to an SD card:

    Code Block
    xz -dc rzv2l-solidrun-sd-debian-6391518.img.xz | dd of=/dev/sdX oflag=direct status=progress

    • For more information, please visit Flashing an SD Card .

    • Note:Plug a micro SD into your Linux PC, the following assumes that the USB-Disk / Micro-SD is added as /dev/sdX and all it’s partitions are unmounted.

  3. SD card insertion
    Please Insert the SD card into your device.

  4. Power connection
    Connect your power adaptor to the DC jack, and then connect the adaptor to mains supply.

  5. Power On
    Hold on the On/Off Power button - SW1 (as shown in the figure below)

    • Note: The system should turn on by default when the power is connected (without pressing the button).

  6. Serial Connection
    Please insert the micro USB into your device, then you can refer to Serial Connection for installing necessary serial connection software in Linux/Windows.

...