Versions Compared

Version Old Version 8 New Version 9
Changes made by

Lior Jigalo

Lior Jigalo

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Main screen:

    • bios information

    • system language

    • System Date

    • System Time

Image Removed

Advanced screen:

...

Trusted Computing:

  • enable/disable tpm.

  • enable/disable PCR Banks.

  • clear TPM pending operation.

  • enable/disable Platform Hierarchy.

  • enable/disable Storage Hierarchy.

  • enable/disable Endorsement Hierarchy.

  • Device Select select (tpm version).

  • enable/disable Disable Block Sid.

...

AMD fTPM configuration:

  • choose tpm device.

  • erase ftpm

...

ACPI Settings:

  • enable/disable ACPI Auto Configuration

  • enable/disable Hibernation: enables to go into S4 sleep state

  • ACPI Sleep State: decide what ot do on sleep suspend to RAM / suspend disabled

  • enable/disable Lock Legacy Resources

...

S5 RTC Wake Settings:

  • Wake system from S5: Disabled / Fixed Time / Dynamic Time

...

UEFI Variables Protection:

  • enable/disable Password protection of Runtime Variables

...

Serial Port Console Redirection:

  • enable/disable Console Redirection

  • Console Redirection Settings:

    • Terminal Type (BIOS visual personalization): VT100 / VT100Plus / VT-UTF8 / ANSI

    • Bits per second: 9600 / 19200 / 38400 / 57600 / 115200

    • Data Bits: 7 / 8

    • Parity: None / Even / Odd / Mark / Space

    • Stop Bits: 1 / 2

    • Flow Control: None / Hardware RTS/CTS

    • VT-UTF8 Combo Key Support: Disabled / Enabled

    • Recorder Mode: Disabled / Enabled

    • Resolution 100x31: Disabled / Enabled

    • Putty KeyPad: VT100 / LINUX / XTERMR6 / SCO / ESCN / VT400

  • Console Redirection EMS: Disabled / Enabled (opens configuration options)

    • Terminal Type EMS: VT100 / VT100Plus / VT-UTF8 / ANSI

    • Bits per second EMS: 9600 / 19200 / 57600 / 115200

    • Flow Control EMS: None / 'Hardware RTS/CTS ' / Software Xon/Xoff

...

CPU Configuration:

  • PSS Support: Disabled / Enabled

  • PPC Adjustment: PState 0 / PState 1 / PState 2

  • NX Mode: Disabled / Enabled

  • SVM Mode: Disabled / Enabled

  • Node 0 Information (opens new window with memory information related to node 0)

...

IDE Configuration:

  • NONE

...

Debug Port Table Configuration:

  • Debug Port Table: Disabled / Enabled

  • Debug Port Table 2: Disabled / Enabled

...

Option ROM Dispatch Policy:

  • Restore if Failure: Disabled / Enabled (ifenaabled and system fails to boot it will restore this and CSM screens settings to default)

  • Primary Video Ignore: Disabled / Enabled

  • WARNING:
    Changing Device(s) Option ROM dispatch policy may affect system’s ability to post and/or boot!
    PROCEED WITH CAUTION!

  • On Board Network Controller: Disabled / Enabled

  • Slot #32 Mass Storage Controller: Disabled / Enabled

  • Slot #33 Mass Storage Controller: Disabled / Enabled

  • Slot #34 Network Controller: Disabled / Enabled

  • Slot #49 Network Controller: Disabled / Enabled

  • Slot #51 Network Controller: Disabled / Enabled

...

PCI Subsystem Settings:

  • WARNING:
    Changing PCI Device(s) settings may have unwanted side effects!
    System may HANG!
    PROCEED WITH CAUTION.

  • Above 4G Decoding: Disabled / Enabled

  • Re-Size BAR Support: Disabled / Enabled

  • SR-IOV Support: Disabled / Enabled

  • BME DMA Mitigation: Disabled / Enabled

  • Hot-Plug Support: Disabled / Enabled

...

USB Configuration:

  • Legacy USB Support: Disabled / Enabled

  • XHCI Hand-off: Disabled / Enabled

  • USB Mass Storage Driver Support: Disabled / Enabled

  • USB transfer time-out: 1 sec / 5 sec / 10 sec / 20 sec

  • Device reset time-out: 10 sec / 20 sec / 30 sec / 40 sec

  • Device power-up delay: Auto / Manual (opens another option)

    • Device power-up delay in seconds: [your custom delay]

  • list of USB mass storage devices with option to choose their type:
    Auto / Floppy / Forced FDD / Hard Disk / CD-ROM

...

Network Stack Configuration:

  • Network Stack: Disabled / Enabled (opens list of options)

    • IPv4 PXE Support: Disabled / Enabled

    • IPv4 HTTP Support: Disabled / Enabled

    • IPv6 PXE Support: Disabled / Enabled

    • IPv6 HTTP Support: Disabled / Enabled

    • PXE boot wait time: [your custom wait time]

    • Media detect count: [your custom retry count]

...

NVMe Configuration:

  • lists your NVME drives, and allows you to run tests also shows last test results and drive data:

    • Self Test Option: Short / Extended

    • Self Test Action: Controller Only Test / Controller and NameSpace Test

    • Run Device Self Test

...

Demo Board:

  • Onboard PCIE LAN PXE ROM: Disabled / Enabled

  • PCI-E Port:

    • Pcie Port Control: Disabled / Enabled (opens a menu for each PCI-E device)

      • Device $ Fun $: Disabled / Enabled / Auto

      • ASPM Mode(Dev#$/Func#$): Disabled / L0s Entry / L1 Entry / L0s And L1 Entry / Auto

      • Hotplug Mode(Dev#$/Func#$): Disabled / Hotplug Basic / Hotplug Server / Hotplug Enhanced / Hotplug Inboard / Auto

    • PCR7 WA Support: Disabled / Enabled / Auto

...

Secure Devices ACPI Table:

  • SDEV ACPI: Disabled / Enabled

...

RAM Disk Configuration:

  • Disk Memory Type: Boot Service Data / Reserved

  • Create raw: Create a new RAM disk with the given starting and ending address.

  • Create from file: Create a new RAM disk from a file, opens a menu with all your storage devices to choose.

  • Remove selected RAM disk(s)

AMD PBS:

...

AMD Firmware Version: displays AMDs firmware information

...

PCI Express Configurations:

  • Pcie Dxio Timing ControlEnable: Disabled / Enabled

  • PCIe x4 Slot-1: Disabled / Enabled

  • AMD XGBE Path Selection: On Board Ports / Add In Card / Disabled

  • XGBE Port0/1 controller: RJ45 / SFP

  • XGBE Port0/1 Mode Selection: 10G/1G Backplane / 2.5G Backplane / SFP+ connector / Backplane AN OFF

  • XGBE Port0/1 Speed Selection: 1G / 10G / '10G/1G' / 100Mbps / 10Mbps

  • PXE BOOT: PORT 0 / PORT 1

  • PCIE 2x8 slots: Disabled / Enabled

  • M.2/PCIe Slot: M.2 NVMe (x4) / M.2 NVMe (x2) / PCIe Slot-3 (x4)

  • PCIe GPP Slot Hotplug support: Disabled / Enabled

  • PCIe dGPU Slot Hotplug support: Disabled / Enabled

  • NVMe RAID mode: Disabled / Enabled

...

Power Saving Configurations:

...

Graphics Configurations:

...

Display Configurations:

...

USB/Thunderbolt Configurations:

...

Audio Configurations:

...

I2C Configurations:

...

Thermal Configurations:

...

MP2 Configurations:

...

Debug Configurations:

...

  • Main screen:

    • bios information

    • system language

    • System Date

    • System Time

Image Added

  • Advanced screen:

    • Trusted Computing:

      • enable/disable tpm.

      • enable/disable PCR Banks.

      • clear TPM pending operation.

      • enable/disable Platform Hierarchy.

      • enable/disable Storage Hierarchy.

      • enable/disable Endorsement Hierarchy.

      • Device Select select (tpm version).

      • enable/disable Disable Block Sid.

    • AMD fTPM configuration:

      • choose tpm device.

      • erase ftpm

    • ACPI Settings:

      • enable/disable ACPI Auto Configuration

      • enable/disable Hibernation: enables to go into S4 sleep state

      • ACPI Sleep State: decide what ot do on sleep suspend to RAM / suspend disabled

      • enable/disable Lock Legacy Resources

    • S5 RTC Wake Settings:

      • Wake system from S5: Disabled / Fixed Time / Dynamic Time

    • UEFI Variables Protection:

      • enable/disable Password protection of Runtime Variables

    • Serial Port Console Redirection:

      • enable/disable Console Redirection

      • Console Redirection Settings:

        • Terminal Type (BIOS visual personalization): VT100 / VT100Plus / VT-UTF8 / ANSI

        • Bits per second: 9600 / 19200 / 38400 / 57600 / 115200

        • Data Bits: 7 / 8

        • Parity: None / Even / Odd / Mark / Space

        • Stop Bits: 1 / 2

        • Flow Control: None / Hardware RTS/CTS

        • VT-UTF8 Combo Key Support: Disabled / Enabled

        • Recorder Mode: Disabled / Enabled

        • Resolution 100x31: Disabled / Enabled

        • Putty KeyPad: VT100 / LINUX / XTERMR6 / SCO / ESCN / VT400

      • Console Redirection EMS: Disabled / Enabled (opens configuration options)

        • Terminal Type EMS: VT100 / VT100Plus / VT-UTF8 / ANSI

        • Bits per second EMS: 9600 / 19200 / 57600 / 115200

        • Flow Control EMS: None / 'Hardware RTS/CTS ' / Software Xon/Xoff

    • CPU Configuration:

      • PSS Support: Disabled / Enabled

      • PPC Adjustment: PState 0 / PState 1 / PState 2

      • NX Mode: Disabled / Enabled

      • SVM Mode: Disabled / Enabled

      • Node 0 Information (opens new window with memory information related to node 0)

    • IDE Configuration:

      • NONE

    • Debug Port Table Configuration:

      • Debug Port Table: Disabled / Enabled

      • Debug Port Table 2: Disabled / Enabled

    • Option ROM Dispatch Policy:

      • Restore if Failure: Disabled / Enabled (ifenaabled and system fails to boot it will restore this and CSM screens settings to default)

      • Primary Video Ignore: Disabled / Enabled

      • WARNING:
        Changing Device(s) Option ROM dispatch policy may affect system’s ability to post and/or boot!
        PROCEED WITH CAUTION!

      • On Board Network Controller: Disabled / Enabled

      • Slot #32 Mass Storage Controller: Disabled / Enabled

      • Slot #33 Mass Storage Controller: Disabled / Enabled

      • Slot #34 Network Controller: Disabled / Enabled

      • Slot #49 Network Controller: Disabled / Enabled

      • Slot #51 Network Controller: Disabled / Enabled

    • PCI Subsystem Settings:

      • WARNING:
        Changing PCI Device(s) settings may have unwanted side effects!
        System may HANG!
        PROCEED WITH CAUTION.

      • Above 4G Decoding: Disabled / Enabled

      • Re-Size BAR Support: Disabled / Enabled

      • SR-IOV Support: Disabled / Enabled

      • BME DMA Mitigation: Disabled / Enabled

      • Hot-Plug Support: Disabled / Enabled

    • USB Configuration:

      • Legacy USB Support: Disabled / Enabled

      • XHCI Hand-off: Disabled / Enabled

      • USB Mass Storage Driver Support: Disabled / Enabled

      • USB transfer time-out: 1 sec / 5 sec / 10 sec / 20 sec

      • Device reset time-out: 10 sec / 20 sec / 30 sec / 40 sec

      • Device power-up delay: Auto / Manual (opens another option)

        • Device power-up delay in seconds: [your custom delay]

      • list of USB mass storage devices with option to choose their type:
        Auto / Floppy / Forced FDD / Hard Disk / CD-ROM

    • Network Stack Configuration:

      • Network Stack: Disabled / Enabled (opens list of options)

        • IPv4 PXE Support: Disabled / Enabled

        • IPv4 HTTP Support: Disabled / Enabled

        • IPv6 PXE Support: Disabled / Enabled

        • IPv6 HTTP Support: Disabled / Enabled

        • PXE boot wait time: [your custom wait time]

        • Media detect count: [your custom retry count]

    • NVMe Configuration:

      • lists your NVME drives, and allows you to run tests also shows last test results and drive data:

        • Self Test Option: Short / Extended

        • Self Test Action: Controller Only Test / Controller and NameSpace Test

        • Run Device Self Test

    • Demo Board:

      • Onboard PCIE LAN PXE ROM: Disabled / Enabled

      • PCI-E Port:

        • Pcie Port Control: Disabled / Enabled (opens a menu for each PCI-E device)

          • Device $ Fun $: Disabled / Enabled / Auto

          • ASPM Mode(Dev#$/Func#$): Disabled / L0s Entry / L1 Entry / L0s And L1 Entry / Auto

          • Hotplug Mode(Dev#$/Func#$): Disabled / Hotplug Basic / Hotplug Server / Hotplug Enhanced / Hotplug Inboard / Auto

        • PCR7 WA Support: Disabled / Enabled / Auto

    • Secure Devices ACPI Table:

      • SDEV ACPI: Disabled / Enabled

    • RAM Disk Configuration:

      • Disk Memory Type: Boot Service Data / Reserved

      • Create raw: Create a new RAM disk with the given starting and ending address.

      • Create from file: Create a new RAM disk from a file, opens a menu with all your storage devices to choose.

      • Remove selected RAM disk(s)

    • Tls Auth Configuration:

      • add / remove client certificate

    • AMD PBS:

      • AMD Firmware Version: displays AMDs firmware information

      • PCI Express Configurations:

        • Pcie Dxio Timing ControlEnable: Disabled / Enabled

        • PCIe x4 Slot-1: Disabled / Enabled

        • AMD XGBE Path Selection: On Board Ports / Add In Card / Disabled

        • XGBE Port0/1 controller: RJ45 / SFP

        • XGBE Port0/1 Mode Selection: 10G/1G Backplane / 2.5G Backplane / SFP+ connector / Backplane AN OFF

        • XGBE Port0/1 Speed Selection: 1G / 10G / '10G/1G' / 100Mbps / 10Mbps

        • PXE BOOT: PORT 0 / PORT 1

        • PCIE 2x8 slots: Disabled / Enabled

        • M.2/PCIe Slot: M.2 NVMe (x4) / M.2 NVMe (x2) / PCIe Slot-3 (x4)

        • PCIe GPP Slot Hotplug support: Disabled / Enabled

        • PCIe dGPU Slot Hotplug support: Disabled / Enabled

        • NVMe RAID mode: Disabled / Enabled

      • Power Saving Configurations:

        • S3/Modern Standby Support: S3 Enable / Modern Standby Enable

        • Wake on PME: determines the action when system power is off and PCI enable wake up event occurs. Disabled / Enabled

        • Internal PCIe GPP 0 D3: Disabled / Enabled

          • SOC GPU D3: Disabled / Enabled

          • SOC HD Audio D3: Disabled / Enabled

          • SOC USB3.1 D3: Disabled / Enabled

          • SOC ACP D3: Disabled / Enabled

          • SOC Azalia D3: Disabled / Enabled

        • Internal PCIe GPP 2 D3: Disabled / Enabled

          • SOC USB2.0 D3: Disabled / Enabled

          • SOC USB3.1 for USB4 D3: Disabled / Enabled

          • SOC USB4 D3: Disabled / Enabled

        • Internal USB4 PCIe Tunneling D3: enable internal USB4 PCIe tunneling D3 abd add into PEP Device dependency list. Disabled / Enabled

          • SOC USB4 PCIe Endpoint D3: Disabled / Enabled

        • Unused GPP Clocks Off: Disabled / Enabled

        • Clock PM: CLK_REQ0: Disabled / Enabled

        • Clock PM: CLK_REQ1: Disabled / Enabled

        • Clock PM: CLK_REQ2: Disabled / Enabled

        • Clock PM: CLK_REQ3: Disabled / Enabled

        • Clock PM: CLK_REQ4: Disabled / Enabled

        • Clock PM: CLK_REQ5: Disabled / Enabled

        • Clock PM: CLK_REQ6: Disabled / Enabled

        • Z-states support on non-Z10 capable PCIe: Disabled / Enabled

      • Graphics Configurations:

        • EVAL Slot Power Enable: Disabled / Enabled

        • EVAL CARD T-Diode Routing Select: EC / APU SMBUS0

        • D3Cold Support: Disabled / Enabled

        • NVIDIA DGPU Power Enable: Disabled / Enabled

        • Discrete GPU _DSM Function A: Disabled / Enabled

        • Discrete GPU _DSM Function B: Disabled / Enabled

        • Non-Eval Discrete GPU Support: Disabled / Enabled

        • Discrete GPU HPD Circuitry: OR Circuitry / Pulse Circuitry

        • Discrete GPU's Audio: Disabled / Keep ROM Strap Setting

        • Discrete GPU's USB Port: Keep Default Setting / Disabled

        • Discrete GPU's SSID/SVID: Program by Vendor / Keep Default Setting

          • Discrete GPU's VGA SSID/SVID: [manual]

          • Discrete GPU's AUDIO SSID/SVID: [manual]

        • Discrete GPU BOMACO Support: Disabled / Enabled

          • BLINK LED: Disabled / Enabled

        • ATIF Function 23 Support: Disabled / Enabled

        • Primary Video Adaptor: Ext Graphics (PEG) / Int Graphics (IGD)

      • Display Configurations:

        • DP0 Select: Default (DP) / DP display / HDMI display

        • DP1 Select: Default (DP) / DP display / HDMI display

          • Adjust DP Caps: Soc Default / Cap override

        • DP2: Default (DP with TypeC) / EDP display / HDMI display / DP with TypeC display / DP without TypeC display

          • Adjust DP Caps: Soc Default / Cap override

        • DP2 Over USBC2: DP with TypeC display / Default (DP with TypeC) / DP without TypeC display

        • DP3/HDMI1/USB6: USB / Default (DP without TypeC) / DP display / HDMI display

      • USB/Thunderbolt Configurations:

        • PD USB4 Control Enable/Disable: Disabled / Enabled

        • USB4 Bus Reserved:

        • USB4 Non-Prefetch Memory Reserved: [manual]

        • USB4 non-Prefetch MMIO align (0 ~ 65534 MB): [manual]

        • USB4 Prefetch Memory Reserved: [manual]

        • USB4 Prefetch MMIO align (0 ~ 65534 MB): [manual]

        • USB Camera Enable: Disabled / Enabled

        • USB Finger Printer Enable: Disabled / Enabled

        • UCSI Support: Disabled / Enabled

        • USBC Port Harware Disable Support: Disabled / Enabled

        • Reconfig Rebalance Resources by OS: Disabled / Enabled

        • PD Thunderbolt3 Alt Mode: Disabled / Enabled

        • USB4 ACPI _DEP Support: Disabled / Enabled

      • Audio Configurations:

        • Wake On Voice: Disabled / Enabled

        • ACP Power Gating: Disabled / Enabled

        • ACP CLock Gating: Disabled / Enabled

        • SoundWire SSDT Support: Disabled / Enabled

        • TDM2_DIN Pull High: Disabled / Enabled

      • I2C Configurations:

        • MITT/WITT Selection: Both disable / WITT Only / MITT Only

      • Thermal Configurations:

        • APU PROCHOT# setting:
          Enable APU_PROCHOT# in pure-DC case /
          Disable APU_PROCHOT# /
          Enable APU_PROCHOT# in pure-AC case /
          Enable APU_PROCHOT# in either pure-DC or pure-AC case (not AC+DC)

        • AMD DPTC interface: Disabled / Enabled

        • STT sensor reporting: Disabled / Enabled

      • MP2 Configurations:

        • Power Sensors Routing Select: WALLE lite PDT / WALLE lite PM log

        • Turn off Xtal (S3/S5): Disabled / Enabled

        • Sensor Fusion User Mode Driver: Disabled / Enabled

        • Allocate 100KB For MP2: Disabled / Enabled

        • Wake On Human Presence detection WA: Disabled / Enabled

      • Debug Configurations:

        • Serial Debug Message Under OS: Disabled / Enabled

        • Debug Print In ASL: Disabled / Enabled

        • iLA TraceMemoryEn: Disabled / Enabled

        • StallForUnlock: Disabled / Enabled

      • AMD PMF Settings:

        • AMD PMF Device Support: Disabled / Enabled (opens a list of options)

        • APMF Function 1 Settings:

          • Time interval for PMF to send heartbeat signal to BIOS (seconds): [manual]

        • APMF Function 3 Settings:

          • AMPF Function 3: Disabled / Enabled (opens a list of options)

            • AC_Best_Performance_Limit: [manual]

            • Fan_ID_AC_Best_Performance_Limit: [manual]

            • AC_Better_Performance_Limit: [manual]

            • Fan_ID_AC_Better_Performance_Limit: [manual]

            • AC_Better_Battery_Limit: [manual]

            • Fan_ID_AC_Better_Battery_Limit: [manual]

            • DC_Best_Performance_Limit: [manual]

            • Fan_ID_DC_Best_Performance_Limit: [manual]

            • DC_Better_Performance_Limit: [manual]

            • Fan_ID_DC_Better_Performance_Limit: [manual]

            • DC_Better_Battery_Limit: [manual]

            • Fan_ID_DC_Better_Battery_Limit: [manual]

            • DC_Battery_Saver_Limit: [manual]

            • Fan_ID_DC_Battery_Saver_Limit: [manual]

        • APMF Function 4 Settings: Disabled / Enabled

        • APMF Function 5 Settings: Disabled / Enabled (opens a list of options)

          • T_Balanced_to_Perf : [manual]

          • T_Perf_to_Balanced: [manual]

          • T_Quiet_to_Balanced: [manual]

          • T_Balanced_to_Quiet: [manual]

          • Pfloor_Perf: [manual]

          • Pfloor_Balanced: [manual]

          • Pfloor_Quiet: [manual]

          • P_delta_Balanced_to_Perf: [manual]

          • P_delta_Perf_to_Balanced: [manual]

          • P_delta_Quiet_to_Balanced: [manual]

          • P_delta_Balanced_to_Quiet: [manual]

          • STT_SkinTempLimit_APU_Perf_on_Lap: [manual]

          • STT_SkinTempLimit_HS2_Perf_on_Lap: [manual]

          • STT_SkinTempLimit_APU_Perf: [manual]

          • STT_SkinTempLimit_HS2_Perf: [manual]

          • STT_SkinTempLimit_APU_Balanced: [manual]

          • STT_SkinTempLimit_HS2_Balanced: [manual]

          • STT_SkinTempLimit_APU_Quiet: [manual]

          • STT_SkinTempLimit_HS2: [manual]

          • STTMinLimit_Perf_on_lap: [manual]

          • STTMinLimit_Perf: [manual]

          • STTMinLimit_Balanced: [manual]

          • STTMinLimit_Quiet: [manual]

          • FPPT_Perf_on_lap: [manual]

          • SPPT_Perf_on_lap: [manual]

          • SPL_Perf_on_lap: [manual]

          • SPPT_APUOnly_Perf_on_Lap: [manual]

          • FPPT_Perf: [manual]

          • SPPT_Perf: [manual]

          • SPL_Perf: [manual]

          • SPPT_APUOnly_Perf: [manual]

          • FPPT_Balanced: [manual]

          • SPPT_Balanced: [manual]

          • SPL_Balanced: [manual]

          • SPPT_APUOnly_Balanced: [manual]

          • FPPT_Quiet: [manual]

          • SPPT_Quiet: [manual]

          • SPL_Quiet: [manual]

          • SPPT_APUOnly_Quiet: [manual]

          • Fan_ID_Perf: [manual]

          • Fan_ID_Balanced: [manual]

          • Fan_ID_Quiet: [manual]

        • APMF Function 6 Settings: Disabled / Enabled (opens a list of options)

        • APMF Function 9 Settings: Disabled / Enabled

        • APMF Function 11 Settings: Disabled / Enabled

        • APMF Function 12 Settings: Disabled / Enabled

        • APMF Function 13 Settings: Disabled / Enabled

        • APMF Function 14 Settings: Disabled / Enabled

      • RAS:

      • Above 4GB MMIO Limit:

      • 5V_S5 voltage:

      • AMD KVM Mouse Protocol:

      • Processor Aggregator Device:

      • APIC Software Enable:

      • Dynamic P3T limit:

      • PD Firmware Update:

    • AMD CBS:

      • CPU Common Options:

      • DF Common Options:

      • UMC Common Options:

      • NBIO Common Options:

      • FCH Common Options:

      • SMU Common Options:

        • System Configuration: Auto / 10W / 15W / 25W / 35W / 45W / 54W

        • Sustained Power Limit: [manual]

        • PPT Control: Auto / Manual (opens manual value input option)

        • STAPM Control: Auto / Manual (opens manual value input option)

        • Thermal Control: Auto / Manual (opens manual value input option)

        • TDC Control: Auto / Manual (opens manual value input option)

        • EDC Control: Auto / Manual (opens manual value input option)

        • PSI3 Control: Auto / Manual (opens manual value input option)

        • PROCHOT Control: Auto / Manual (opens manual value input option)

        • STT Control: Auto / Manual (opens manual value input option)

        • Fan Control: Auto / Manual (opens manual value input option)

        • VDDP Voltage Control: Auto / Manual (opens manual value input option)

        • VDDM Voltage Control: Auto / Manual (opens manual value input option)

        • SmartShift Control:

          • SmartShift Control: Auto / Manual(opens more options)

            • SmartShift Enable: Auto / Disabled / Enabled

            • APU Only sPPT Limit: [manual]

            • Sustained PowerLimit: [manual]

            • Fast PPT Limit: [manual]

            • Slow PPT Limit: [manual]

        • Zstates (Z9 and Z10): Disabled / Enabled / Auto

      • SOC Miscellaneous Control:

    • Displays 4 Intel NICs if they are present and flashed:

      • when chosen displays brief NIC info, link status and MAC address.

    • Driver Health: displays Intel NICs driver status: Healthy / Not Healty.

...

  • Save & Exit screen:

    • In Save options you can:

      • save, discard changes made in the BIOS configuration.

      • reset the device and exit BIOS and continue the boot process.

    • In Default Options you can:

      • save user configurations.

      • restore default configuration.

    • In Boot Override you can:

      • choose boot device, disregarding the chosen boot order.

Expand
titledsadsad

dsadsadsdasda