Main screen:

• bios information

• system language

• System Date

• System Time

Advanced screen:

• Trusted Computing:

  • enable/disable tpm.

  • enable/disable PCR Banks.

  • clear TPM pending operation.

  • enable/disable Platform Hierarchy.

  • enable/disable Storage Hierarchy.

  • enable/disable Endorsement Hierarchy.

  • Device Select select (tpm version).

  • enable/disable Disable Block Sid.

• AMD fTPM configuration:

  • choose tpm device.

  • erase ftpm

• ACPI Settings:

  • enable/disable ACPI Auto Configuration

  • enable/disable Hibernation: enables to go into S4 sleep state

  • ACPI Sleep State: decide what ot do on sleep suspend to RAM / suspend disabled

  • enable/disable Lock Legacy Resources

• S5 RTC Wake Settings:

  • Wake system from S5: Disabled / Fixed Time / Dynamic Time

• UEFI Variables Protection:

  • enable/disable Password protection of Runtime Variables

• Serial Port Console Redirection:

  • enable/disable Console Redirection

  • Console Redirection Settings:

    • Terminal Type (BIOS visual personalization): VT100 / VT100Plus / VT-UTF8 / ANSI

    • Bits per second: 9600 / 19200 / 38400 / 57600 / 115200

    • Data Bits: 7 / 8

    • Parity: None / Even / Odd / Mark / Space

    • Stop Bits: 1 / 2

    • Flow Control: None / Hardware RTS/CTS

    • VT-UTF8 Combo Key Support: Disabled / Enabled

    • Recorder Mode: Disabled / Enabled

    • Resolution 100x31: Disabled / Enabled

    • Putty KeyPad: VT100 / LINUX / XTERMR6 / SCO / ESCN / VT400

  • Console Redirection EMS: Disabled / Enabled (opens configuration options)

    • Terminal Type EMS: VT100 / VT100Plus / VT-UTF8 / ANSI

    • Bits per second EMS: 9600 / 19200 / 57600 / 115200

    • Flow Control EMS: None / 'Hardware RTS/CTS ' / Software Xon/Xoff

• CPU Configuration:

  • PSS Support: Disabled / Enabled

  • PPC Adjustment: PState 0 / PState 1 / PState 2

  • NX Mode: Disabled / Enabled

  • SVM Mode: Disabled / Enabled

  • Node 0 Information (opens new window with memory information related to node 0)

• IDE Configuration:

  • NONE

• Debug Port Table Configuration:

  • Debug Port Table: Disabled / Enabled

  • Debug Port Table 2: Disabled / Enabled

• Option ROM Dispatch Policy:

  • Restore if Failure: Disabled / Enabled (ifenaabled and system fails to boot it will restore this and CSM screens settings to default)

  • Primary Video Ignore: Disabled / Enabled

  • WARNING:
    Changing Device(s) Option ROM dispatch policy may affect system’s ability to post and/or boot!
    PROCEED WITH CAUTION!

  • On Board Network Controller: Disabled / Enabled

  • Slot #32 Mass Storage Controller: Disabled / Enabled

  • Slot #33 Mass Storage Controller: Disabled / Enabled

  • Slot #34 Network Controller: Disabled / Enabled

  • Slot #49 Network Controller: Disabled / Enabled

  • Slot #51 Network Controller: Disabled / Enabled

• PCI Subsystem Settings:

  • WARNING:
    Changing PCI Device(s) settings may have unwanted side effects!
    System may HANG!
    PROCEED WITH CAUTION.

  • Above 4G Decoding: Disabled / Enabled

  • Re-Size BAR Support: Disabled / Enabled

  • SR-IOV Support: Disabled / Enabled

  • BME DMA Mitigation: Disabled / Enabled

  • Hot-Plug Support: Disabled / Enabled

• USB Configuration:

  • Legacy USB Support: Disabled / Enabled

  • XHCI Hand-off: Disabled / Enabled

  • USB Mass Storage Driver Support: Disabled / Enabled

  • USB transfer time-out: 1 sec / 5 sec / 10 sec / 20 sec

  • Device reset time-out: 10 sec / 20 sec / 30 sec / 40 sec

  • Device power-up delay: Auto / Manual (opens another option)

    • Device power-up delay in seconds: [your custom delay]

  • list of USB mass storage devices with option to choose their type:
    Auto / Floppy / Forced FDD / Hard Disk / CD-ROM

• Network Stack Configuration:

  • Network Stack: Disabled / Enabled (opens list of options)

    • IPv4 PXE Support: Disabled / Enabled

    • IPv4 HTTP Support: Disabled / Enabled

    • IPv6 PXE Support: Disabled / Enabled

    • IPv6 HTTP Support: Disabled / Enabled

    • PXE boot wait time: [your custom wait time]

    • Media detect count: [your custom retry count]

• NVMe Configuration:

  • lists your NVME drives, and allows you to run tests also shows last test results and drive data:

    • Self Test Option: Short / Extended

    • Self Test Action: Controller Only Test / Controller and NameSpace Test

    • Run Device Self Test

• Demo Board:

  • Onboard PCIE LAN PXE ROM: Disabled / Enabled

  • PCI-E Port:

    • Pcie Port Control: Disabled / Enabled (opens a menu for each PCI-E device)

      • Device $ Fun $: Disabled / Enabled / Auto

      • ASPM Mode(Dev#$/Func#$): Disabled / L0s Entry / L1 Entry / L0s And L1 Entry / Auto

      • Hotplug Mode(Dev#$/Func#$): Disabled / Hotplug Basic / Hotplug Server / Hotplug Enhanced / Hotplug Inboard / Auto

    • PCR7 WA Support: Disabled / Enabled / Auto

• Secure Devices ACPI Table:

  • SDEV ACPI: Disabled / Enabled

• RAM Disk Configuration:

  • Disk Memory Type: Boot Service Data / Reserved

  • Create raw: Create a new RAM disk with the given starting and ending address.

  • Create from file: Create a new RAM disk from a file, opens a menu with all your storage devices to choose.

  • Remove selected RAM disk(s)

• Tls Auth Configuration:

  • add / remove client certificate

• AMD PBS:

  • AMD Firmware Version: displays AMDs firmware information

  • PCI Express Configurations:

    • Pcie Dxio Timing ControlEnable: Disabled / Enabled

    • PCIe x4 Slot-1: Disabled / Enabled

    • AMD XGBE Path Selection: On Board Ports / Add In Card / Disabled

    • XGBE Port0/1 controller: RJ45 / SFP

    • XGBE Port0/1 Mode Selection: 10G/1G Backplane / 2.5G Backplane / SFP+ connector / Backplane AN OFF

    • XGBE Port0/1 Speed Selection: 1G / 10G / '10G/1G' / 100Mbps / 10Mbps

    • PXE BOOT: PORT 0 / PORT 1

    • PCIE 2x8 slots: Disabled / Enabled

    • M.2/PCIe Slot: M.2 NVMe (x4) / M.2 NVMe (x2) / PCIe Slot-3 (x4)

    • PCIe GPP Slot Hotplug support: Disabled / Enabled

    • PCIe dGPU Slot Hotplug support: Disabled / Enabled

    • NVMe RAID mode: Disabled / Enabled

  • Power Saving Configurations:

    • S3/Modern Standby Support: S3 Enable / Modern Standby Enable

    • Wake on PME: determines the action when system power is off and PCI enable wake up event occurs. Disabled / Enabled

    • Internal PCIe GPP 0 D3: Disabled / Enabled

      • SOC GPU D3: Disabled / Enabled

      • SOC HD Audio D3: Disabled / Enabled

      • SOC USB3.1 D3: Disabled / Enabled

      • SOC ACP D3: Disabled / Enabled

      • SOC Azalia D3: Disabled / Enabled

    • Internal PCIe GPP 2 D3: Disabled / Enabled

      • SOC USB2.0 D3: Disabled / Enabled

      • SOC USB3.1 for USB4 D3: Disabled / Enabled

      • SOC USB4 D3: Disabled / Enabled

    • Internal USB4 PCIe Tunneling D3: enable internal USB4 PCIe tunneling D3 abd add into PEP Device dependency list. Disabled / Enabled

      • SOC USB4 PCIe Endpoint D3: Disabled / Enabled

    • Unused GPP Clocks Off: Disabled / Enabled

    • Clock PM: CLK_REQ0: Disabled / Enabled

    • Clock PM: CLK_REQ1: Disabled / Enabled

    • Clock PM: CLK_REQ2: Disabled / Enabled

    • Clock PM: CLK_REQ3: Disabled / Enabled

    • Clock PM: CLK_REQ4: Disabled / Enabled

    • Clock PM: CLK_REQ5: Disabled / Enabled

    • Clock PM: CLK_REQ6: Disabled / Enabled

    • Z-states support on non-Z10 capable PCIe: Disabled / Enabled

  • Graphics Configurations:

    • EVAL Slot Power Enable: Disabled / Enabled

    • EVAL CARD T-Diode Routing Select: EC / APU SMBUS0

    • D3Cold Support: Disabled / Enabled

    • NVIDIA DGPU Power Enable: Disabled / Enabled

    • Discrete GPU _DSM Function A: Disabled / Enabled

    • Discrete GPU _DSM Function B: Disabled / Enabled

    • Non-Eval Discrete GPU Support: Disabled / Enabled

    • Discrete GPU HPD Circuitry: OR Circuitry / Pulse Circuitry

    • Discrete GPU's Audio: Disabled / Keep ROM Strap Setting

    • Discrete GPU's USB Port: Keep Default Setting / Disabled

    • Discrete GPU's SSID/SVID: Program by Vendor / Keep Default Setting

      • Discrete GPU's VGA SSID/SVID: [manual]

      • Discrete GPU's AUDIO SSID/SVID: [manual]

    • Discrete GPU BOMACO Support: Disabled / Enabled

      • BLINK LED: Disabled / Enabled

    • ATIF Function 23 Support: Disabled / Enabled

    • Primary Video Adaptor: Ext Graphics (PEG) / Int Graphics (IGD)

  • Display Configurations:

    • DP0 Select: Default (DP) / DP display / HDMI display

    • DP1 Select: Default (DP) / DP display / HDMI display

      • Adjust DP Caps: Soc Default / Cap override

    • DP2: Default (DP with TypeC) / EDP display / HDMI display / DP with TypeC display / DP without TypeC display

      • Adjust DP Caps: Soc Default / Cap override

    • DP2 Over USBC2: DP with TypeC display / Default (DP with TypeC) / DP without TypeC display

    • DP3/HDMI1/USB6: USB / Default (DP without TypeC) / DP display / HDMI display

  • USB/Thunderbolt Configurations:

    • PD USB4 Control Enable/Disable: Disabled / Enabled

    • USB4 Bus Reserved:

    • USB4 Non-Prefetch Memory Reserved: [manual]

    • USB4 non-Prefetch MMIO align (0 ~ 65534 MB): [manual]

    • USB4 Prefetch Memory Reserved: [manual]

    • USB4 Prefetch MMIO align (0 ~ 65534 MB): [manual]

    • USB Camera Enable: Disabled / Enabled

    • USB Finger Printer Enable: Disabled / Enabled

    • UCSI Support: Disabled / Enabled

    • USBC Port Harware Disable Support: Disabled / Enabled

    • Reconfig Rebalance Resources by OS: Disabled / Enabled

    • PD Thunderbolt3 Alt Mode: Disabled / Enabled

    • USB4 ACPI _DEP Support: Disabled / Enabled

  • Audio Configurations:

    • Wake On Voice: Disabled / Enabled

    • ACP Power Gating: Disabled / Enabled

    • ACP CLock Gating: Disabled / Enabled

    • SoundWire SSDT Support: Disabled / Enabled

    • TDM2_DIN Pull High: Disabled / Enabled

  • I2C Configurations:

    • MITT/WITT Selection: Both disable / WITT Only / MITT Only

  • Thermal Configurations:

    • APU PROCHOT# setting:
      Enable APU_PROCHOT# in pure-DC case /
      Disable APU_PROCHOT# /
      Enable APU_PROCHOT# in pure-AC case /
      Enable APU_PROCHOT# in either pure-DC or pure-AC case (not AC+DC)

    • AMD DPTC interface: Disabled / Enabled

    • STT sensor reporting: Disabled / Enabled

  • MP2 Configurations:

    • Power Sensors Routing Select: WALLE lite PDT / WALLE lite PM log

    • Turn off Xtal (S3/S5): Disabled / Enabled

    • Sensor Fusion User Mode Driver: Disabled / Enabled

    • Allocate 100KB For MP2: Disabled / Enabled

    • Wake On Human Presence detection WA: Disabled / Enabled

  • Debug Configurations:

    • Serial Debug Message Under OS: Disabled / Enabled

    • Debug Print In ASL: Disabled / Enabled

    • iLA TraceMemoryEn: Disabled / Enabled

    • StallForUnlock: Disabled / Enabled

  • AMD PMF Settings:

    • AMD PMF Device Support: Disabled / Enabled (opens a list of options)

    • APMF Function 1 Settings:

      • Time interval for PMF to send heartbeat signal to BIOS (seconds): [manual]

    • APMF Function 3 Settings:

      • AMPF Function 3: Disabled / Enabled (opens a list of options)

        • AC_Best_Performance_Limit: [manual]

        • Fan_ID_AC_Best_Performance_Limit: [manual]

        • AC_Better_Performance_Limit: [manual]

        • Fan_ID_AC_Better_Performance_Limit: [manual]

        • AC_Better_Battery_Limit: [manual]

        • Fan_ID_AC_Better_Battery_Limit: [manual]

        • DC_Best_Performance_Limit: [manual]

        • Fan_ID_DC_Best_Performance_Limit: [manual]

        • DC_Better_Performance_Limit: [manual]

        • Fan_ID_DC_Better_Performance_Limit: [manual]

        • DC_Better_Battery_Limit: [manual]

        • Fan_ID_DC_Better_Battery_Limit: [manual]

        • DC_Battery_Saver_Limit: [manual]

        • Fan_ID_DC_Battery_Saver_Limit: [manual]

    • APMF Function 4 Settings: Disabled / Enabled

    • APMF Function 5 Settings: Disabled / Enabled (opens a list of options)

      • T_Balanced_to_Perf : [manual]

      • T_Perf_to_Balanced: [manual]

      • T_Quiet_to_Balanced: [manual]

      • T_Balanced_to_Quiet: [manual]

      • Pfloor_Perf: [manual]

      • Pfloor_Balanced: [manual]

      • Pfloor_Quiet: [manual]

      • P_delta_Balanced_to_Perf: [manual]

      • P_delta_Perf_to_Balanced: [manual]

      • P_delta_Quiet_to_Balanced: [manual]

      • P_delta_Balanced_to_Quiet: [manual]

      • STT_SkinTempLimit_APU_Perf_on_Lap: [manual]

      • STT_SkinTempLimit_HS2_Perf_on_Lap: [manual]

      • STT_SkinTempLimit_APU_Perf: [manual]

      • STT_SkinTempLimit_HS2_Perf: [manual]

      • STT_SkinTempLimit_APU_Balanced: [manual]

      • STT_SkinTempLimit_HS2_Balanced: [manual]

      • STT_SkinTempLimit_APU_Quiet: [manual]

      • STT_SkinTempLimit_HS2: [manual]

      • STTMinLimit_Perf_on_lap: [manual]

      • STTMinLimit_Perf: [manual]

      • STTMinLimit_Balanced: [manual]

      • STTMinLimit_Quiet: [manual]

      • FPPT_Perf_on_lap: [manual]

      • SPPT_Perf_on_lap: [manual]

      • SPL_Perf_on_lap: [manual]

      • SPPT_APUOnly_Perf_on_Lap: [manual]

      • FPPT_Perf: [manual]

      • SPPT_Perf: [manual]

      • SPL_Perf: [manual]

      • SPPT_APUOnly_Perf: [manual]

      • FPPT_Balanced: [manual]

      • SPPT_Balanced: [manual]

      • SPL_Balanced: [manual]

      • SPPT_APUOnly_Balanced: [manual]

      • FPPT_Quiet: [manual]

      • SPPT_Quiet: [manual]

      • SPL_Quiet: [manual]

      • SPPT_APUOnly_Quiet: [manual]

      • Fan_ID_Perf: [manual]

      • Fan_ID_Balanced: [manual]

      • Fan_ID_Quiet: [manual]

    • APMF Function 6 Settings: Disabled / Enabled (opens a list of options)

    • APMF Function 9 Settings: Disabled / Enabled

    • APMF Function 11 Settings: Disabled / Enabled

    • APMF Function 12 Settings: Disabled / Enabled

    • APMF Function 13 Settings: Disabled / Enabled

    • APMF Function 14 Settings: Disabled / Enabled

  • RAS:

  • Above 4GB MMIO Limit:

  • 5V_S5 voltage:

  • AMD KVM Mouse Protocol:

  • Processor Aggregator Device:

  • APIC Software Enable:

  • Dynamic P3T limit:

  • PD Firmware Update:

• AMD CBS:

  • CPU Common Options:

  • DF Common Options:

  • UMC Common Options:

  • NBIO Common Options:

  • FCH Common Options:

  • SMU Common Options:

    • System Configuration: Auto / 10W / 15W / 25W / 35W / 45W / 54W

    • Sustained Power Limit: [manual]

    • PPT Control: Auto / Manual (opens manual value input option)

    • STAPM Control: Auto / Manual (opens manual value input option)

    • Thermal Control: Auto / Manual (opens manual value input option)

    • TDC Control: Auto / Manual (opens manual value input option)

    • EDC Control: Auto / Manual (opens manual value input option)

    • PSI3 Control: Auto / Manual (opens manual value input option)

    • PROCHOT Control: Auto / Manual (opens manual value input option)

    • STT Control: Auto / Manual (opens manual value input option)

    • Fan Control: Auto / Manual (opens manual value input option)

    • VDDP Voltage Control: Auto / Manual (opens manual value input option)

    • VDDM Voltage Control: Auto / Manual (opens manual value input option)

    • SmartShift Control:

      • SmartShift Control: Auto / Manual(opens more options)

        • SmartShift Enable: Auto / Disabled / Enabled

        • APU Only sPPT Limit: [manual]

        • Sustained PowerLimit: [manual]

        • Fast PPT Limit: [manual]

        • Slow PPT Limit: [manual]

    • Zstates (Z9 and Z10): Disabled / Enabled / Auto

  • SOC Miscellaneous Control:

• Displays 4 Intel NICs if they are present and flashed:

  • when chosen displays brief NIC info, link status and MAC address.

• Driver Health: displays Intel NICs driver status: Healthy / Not Healty.

Chipset screen:

• South Bridge:

  • SB USB configuration, enable disable different USB port options.

• GFX Configuration:

  • NOT SUPPORTED

• North Bridge:

  • DDR Memmory data.

Security screen:

• change Administrator Password.

• change User Password.

• HDD Security Configuration: Displays NVME / HDD security info

• secure boot options:

  • enable/disable secure boot.

  • secure boot mode.

Boot screen:

• In Boot Configuration you can:

  • choose the bios wait time before it continues booting.

  • choose NumLock state on boot process enabled/disabled.

  • choose quiet boot options.

• In Boot Option Priorities you can:

  • choose boot order

  • enable/disable fast boot

  • choose SATA properties

  • enable/disable NVME support

  • enable/disable VGA support

  • choose USB support properties

  • nable/disabl PS2 devices support

  • enable/disable Network stack support

  • enable/disable USB Mass Storage support

Save & Exit screen:

• In Save options you can:

  • save, discard changes made in the BIOS configuration.

  • reset the device and exit BIOS and continue the boot process.

• In Default Options you can:

  • save user configurations.

  • restore default configuration.

• In Boot Override you can:

  • choose boot device, disregarding the chosen boot order.