...
Advanced screen:
Trusted Computing:
enable/disable tpm.
enable/disable PCR Banks.
clear TPM pending operation.
enable/disable Platform Hierarchy.
enable/disable Storage Hierarchy.
enable/disable Endorsement Hierarchy.
Device Select select (tpm version).
enable/disable Disable Block Sid.
AMD fTPM configuration:
choose tpm device.
erase ftpm
ACPI Settings:
enable/disable ACPI Auto Configuration
enable/disable Hibernation: enables to go into S4 sleep state
ACPI Sleep State: decide what ot do on sleep suspend to RAM / suspend disabled
enable/disable Lock Legacy Resources
S5 RTC Wake Settings:
Wake system from S5: Disabled / Fixed Time / Dynamic Time
UEFI Variables Protection:
enable/disable Password protection of Runtime Variables
Serial Port Console Redirection:
enable/disable Console Redirection
Console Redirection Settings:
Terminal Type (BIOS visual personalization): VT100 / VT100Plus / VT-UTF8 / ANSI
Bits per second: 9600 / 19200 / 38400 / 57600 / 115200
Data Bits: 7 / 8
Parity: None / Even / Odd / Mark / Space
Stop Bits: 1 / 2
Flow Control: None / Hardware RTS/CTS
VT-UTF8 Combo Key Support: Disabled / Enabled
Recorder Mode: Disabled / Enabled
Resolution 100x31: Disabled / Enabled
Putty KeyPad: VT100 / LINUX / XTERMR6 / SCO / ESCN / VT400
Console Redirection EMS: Disabled / Enabled (opens configuration options)
Terminal Type EMS: VT100 / VT100Plus / VT-UTF8 / ANSI
Bits per second EMS: 9600 / 19200 / 57600 / 115200
Flow Control EMS: None / 'Hardware RTS/CTS ' / Software Xon/Xoff
CPU Configuration:
PSS Support: Disabled / Enabled
PPC Adjustment: PState 0 / PState 1 / PState 2
NX Mode: Disabled / Enabled
SVM Mode: Disabled / Enabled
Node 0 Information (opens new window with memory information related to node 0)
IDE Configuration:
NONE
Debug Port Table Configuration:
Debug Port Table: Disabled / Enabled
Debug Port Table 2: Disabled / Enabled
Option ROM Dispatch Policy:
Restore if Failure: Disabled / Enabled (ifenaabled and system fails to boot it will restore this and CSM screens settings to default)
Primary Video Ignore: Disabled / Enabled
WARNING:
Changing Device(s) Option ROM dispatch policy may affect system’s ability to post and/or boot!
PROCEED WITH CAUTION!On Board Network Controller: Disabled / Enabled
Slot #32 Mass Storage Controller: Disabled / Enabled
Slot #33 Mass Storage Controller: Disabled / Enabled
Slot #34 Network Controller: Disabled / Enabled
Slot #49 Network Controller: Disabled / Enabled
Slot #51 Network Controller: Disabled / Enabled
PCI Subsystem Settings:
WARNING:
Changing PCI Device(s) settings may have unwanted side effects!
System may HANG!
PROCEED WITH CAUTION.Above 4G Decoding: Disabled / Enabled
Re-Size BAR Support: Disabled / Enabled
SR-IOV Support: Disabled / Enabled
BME DMA Mitigation: Disabled / Enabled
Hot-Plug Support: Disabled / Enabled
USB Configuration:
Legacy USB Support: Disabled / Enabled
XHCI Hand-off: Disabled / Enabled
USB Mass Storage Driver Support: Disabled / Enabled
USB transfer time-out: 1 sec / 5 sec / 10 sec / 20 sec
Device reset time-out: 10 sec / 20 sec / 30 sec / 40 sec
Device power-up delay: Auto / Manual (opens another option)
Device power-up delay in seconds: [your custom delay]
list of USB mass storage devices with option to choose their type:
Auto / Floppy / Forced FDD / Hard Disk / CD-ROM
Network Stack Configuration:
Network Stack: Disabled / Enabled (opens list of options)
IPv4 PXE Support: Disabled / Enabled
IPv4 HTTP Support: Disabled / Enabled
IPv6 PXE Support: Disabled / Enabled
IPv6 HTTP Support: Disabled / Enabled
PXE boot wait time: [your custom wait time]
Media detect count: [your custom retry count]
NVMe Configuration:
lists your NVME drives, and allows you to run tests also shows last test results and drive data:
Self Test Option: Short / Extended
Self Test Action: Controller Only Test / Controller and NameSpace Test
Run Device Self Test
Demo Board:
Onboard PCIE LAN PXE ROM: Disabled / Enabled
PCI-E Port:
Pcie Port Control: Disabled / Enabled (opens a menu for each PCI-E device)
Device $ Fun $: Disabled / Enabled / Auto
ASPM Mode(Dev#$/Func#$): Disabled / L0s Entry / L1 Entry / L0s And L1 Entry / Auto
Hotplug Mode(Dev#$/Func#$): Disabled / Hotplug Basic / Hotplug Server / Hotplug Enhanced / Hotplug Inboard / Auto
PCR7 WA Support: Disabled / Enabled / Auto
Secure Devices ACPI Table:
SDEV ACPI: Disabled / Enabled
RAM Disk Configuration:
Disk Memory Type: Boot Service Data / Reserved
Create raw: Create a new RAM disk with the given starting and ending address.
Create from file: Create a new RAM disk from a file, opens a menu with all your storage devices to choose.
Remove selected RAM disk(s)
AMD PBS:
AMD Firmware Version: displays AMDs firmware information
PCI Express Configurations:
Pcie Dxio Timing ControlEnable: Disabled / Enabled
PCIe x4 Slot-1: Disabled / Enabled
AMD XGBE Path Selection: On Board Ports / Add In Card / Disabled
XGBE Port0/1 controller: RJ45 / SFP
XGBE Port0/1 Mode Selection: 10G/1G Backplane / 2.5G Backplane / SFP+ connector / Backplane AN OFF
XGBE Port0/1 Speed Selection: 1G / 10G / '10G/1G' / 100Mbps / 10Mbps
PXE BOOT: PORT 0 / PORT 1
PCIE 2x8 slots: Disabled / Enabled
M.2/PCIe Slot: M.2 NVMe (x4) / M.2 NVMe (x2) / PCIe Slot-3 (x4)
PCIe GPP Slot Hotplug support: Disabled / Enabled
PCIe dGPU Slot Hotplug support: Disabled / Enabled
NVMe RAID mode: Disabled / Enabled
Power Saving Configurations:
Graphics Configurations:
Display Configurations:
USB/Thunderbolt Configurations:
Audio Configurations:
I2C Configurations:
Thermal Configurations:
MP2 Configurations:
Debug Configurations:
AMD PMF Settings:
RAS:
Above 4GB MMIO Limit:
5V_S5 voltage:
AMD KVM Mouse Protocol:
Processor Aggregator Device:
APIC Software Enable:
Dynamic P3T limit:
PD Firmware Update:
AMD CBS:
CPU Common Options:
DF Common Options:
UMC Common Options:
NBIO Common Options:
FCH Common Options:
SMU Common Options:
System Configuration: Auto / 10W / 15W / 25W / 35W / 45W / 54W
Sustained Power Limit: [manual]
PPT Control: Auto / Manual (opens manual value input option)
STAPM Control: Auto / Manual (opens manual value input option)
Thermal Control: Auto / Manual (opens manual value input option)
TDC Control: Auto / Manual (opens manual value input option)
EDC Control: Auto / Manual (opens manual value input option)
PSI3 Control: Auto / Manual (opens manual value input option)
PROCHOT Control: Auto / Manual (opens manual value input option)
STT Control: Auto / Manual (opens manual value input option)
Fan Control: Auto / Manual (opens manual value input option)
VDDP Voltage Control: Auto / Manual (opens manual value input option)
VDDM Voltage Control: Auto / Manual (opens manual value input option)
SmartShift Control:
SmartShift Control: Auto / Manual(opens more options)
SmartShift Enable: Auto / Disabled / Enabled
APU Only sPPT Limit: [manual]
Sustained PowerLimit: [manual]
Fast PPT Limit: [manual]
Slow PPT Limit: [manual]
Zstates (Z9 and Z10): Disabled / Enabled / Auto
SOC Miscellaneous Control:
Displays 4 Intel NICs if they are present and flashed:
when chosen displays brief NIC info, link status and MAC address.
Driver Health: displays Intel NICs driver status: Healthy / Not Healty.
Chipset screen:
South Bridge:
SB USB configuration, enable disable different USB port options.
GFX Configuration:
NOT SUPPORTED
North Bridge:
DDR Memmory data.
...
Security screen:
change Administrator Password.
change User Password.
HDD Security Configuration: Displays NVME / HDD security info
secure boot options:
enable/disable secure boot.
secure boot mode.
...