Main screen:

• bios information

• system language

• System Date

• System Time

Advanced screen:

• Trusted Computing:

  • enable/disable tpm.

  • enable/disable PCR Banks.

  • clear TPM pending operation.

  • enable/disable Platform Hierarchy.

  • enable/disable Storage Hierarchy.

  • enable/disable Endorsement Hierarchy.

  • Device Select select (tpm version).

  • enable/disable Disable Block Sid.

• AMD fTPM configuration:

  • choose tpm device.

  • erase ftpm

• ACPI Settings:

  • enable/disable ACPI Auto Configuration

  • enable/disable Hibernation: enables to go into S4 sleep state

  • ACPI Sleep State: decide what ot do on sleep suspend to RAM / suspend disabled

  • enable/disable Lock Legacy Resources

• S5 RTC Wake Settings:

  • Wake system from S5: Disabled / Fixed Time / Dynamic Time

• UEFI Variables Protection:

  • enable/disable Password protection of Runtime Variables

• Serial Port Console Redirection:

  • enable/disable Console Redirection

  • Console Redirection Settings:

    • Terminal Type (BIOS visual personalization): VT100 / VT100Plus / VT-UTF8 / ANSI

    • Bits per second: 9600 / 19200 / 38400 / 57600 / 115200

    • Data Bits: 7 / 8

    • Parity: None / Even / Odd / Mark / Space

    • Stop Bits: 1 / 2

    • Flow Control: None / Hardware RTS/CTS

    • VT-UTF8 Combo Key Support: Disabled / Enabled

    • Recorder Mode: Disabled / Enabled

    • Resolution 100x31: Disabled / Enabled

    • Putty KeyPad: VT100 / LINUX / XTERMR6 / SCO / ESCN / VT400

  • Console Redirection EMS: Disabled / Enabled (opens configuration options)

    • Terminal Type EMS: VT100 / VT100Plus / VT-UTF8 / ANSI

    • Bits per second EMS: 9600 / 19200 / 57600 / 115200

    • Flow Control EMS: None / 'Hardware RTS/CTS ' / Software Xon/Xoff

• CPU Configuration:

  • PSS Support: Disabled / Enabled

  • PPC Adjustment: PState 0 / PState 1 / PState 2

  • NX Mode: Disabled / Enabled

  • SVM Mode: Disabled / Enabled

  • Node 0 Information (opens new window with memory information related to node 0)

• IDE Configuration:

  • NONE

• Debug Port Table Configuration:

  • Debug Port Table: Disabled / Enabled

  • Debug Port Table 2: Disabled / Enabled

• Option ROM Dispatch Policy:

  • Restore if Failure: Disabled / Enabled (ifenaabled and system fails to boot it will restore this and CSM screens settings to default)

  • Primary Video Ignore: Disabled / Enabled

  • WARNING:
    Changing Device(s) Option ROM dispatch policy may affect system’s ability to post and/or boot!
    PROCEED WITH CAUTION!

  • On Board Network Controller: Disabled / Enabled

  • Slot #32 Mass Storage Controller: Disabled / Enabled

  • Slot #33 Mass Storage Controller: Disabled / Enabled

  • Slot #34 Network Controller: Disabled / Enabled

  • Slot #49 Network Controller: Disabled / Enabled

  • Slot #51 Network Controller: Disabled / Enabled

• PCI Subsystem Settings:

  • WARNING:
    Changing PCI Device(s) settings may have unwanted side effects!
    System may HANG!
    PROCEED WITH CAUTION.

  • Above 4G Decoding: Disabled / Enabled

  • Re-Size BAR Support: Disabled / Enabled

  • SR-IOV Support: Disabled / Enabled

  • BME DMA Mitigation: Disabled / Enabled

  • Hot-Plug Support: Disabled / Enabled

• USB Configuration:

  • Legacy USB Support: Disabled / Enabled

  • XHCI Hand-off: Disabled / Enabled

  • USB Mass Storage Driver Support: Disabled / Enabled

  • USB transfer time-out: 1 sec / 5 sec / 10 sec / 20 sec

  • Device reset time-out: 10 sec / 20 sec / 30 sec / 40 sec

  • Device power-up delay: Auto / Manual (opens another option)

    • Device power-up delay in seconds: [your custom delay]

  • list of USB mass storage devices with option to choose their type:
    Auto / Floppy / Forced FDD / Hard Disk / CD-ROM

• Network Stack Configuration:

  • Network Stack: Disabled / Enabled (opens list of options)

    • IPv4 PXE Support: Disabled / Enabled

    • IPv4 HTTP Support: Disabled / Enabled

    • IPv6 PXE Support: Disabled / Enabled

    • IPv6 HTTP Support: Disabled / Enabled

    • PXE boot wait time: [your custom wait time]

    • Media detect count: [your custom retry count]

• NVMe Configuration:

  • lists your NVME drives, and allows you to run tests also shows last test results and drive data:

    • Self Test Option: Short / Extended

    • Self Test Action: Controller Only Test / Controller and NameSpace Test

    • Run Device Self Test

• Demo Board:

  • Onboard PCIE LAN PXE ROM: Disabled / Enabled

  • PCI-E Port:

    • Pcie Port Control: Disabled / Enabled (opens a menu for each PCI-E device)

      • Device $ Fun $: Disabled / Enabled / Auto

      • ASPM Mode(Dev#$/Func#$): Disabled / L0s Entry / L1 Entry / L0s And L1 Entry / Auto

      • Hotplug Mode(Dev#$/Func#$): Disabled / Hotplug Basic / Hotplug Server / Hotplug Enhanced / Hotplug Inboard / Auto

    • PCR7 WA Support: Disabled / Enabled / Auto

• Secure Devices ACPI Table:

  • SDEV ACPI: Disabled / Enabled

• RAM Disk Configuration:

  • Disk Memory Type: Boot Service Data / Reserved

  • Create raw: Create a new RAM disk with the given starting and ending address.

  • Create from file: Create a new RAM disk from a file, opens a menu with all your storage devices to choose.

  • Remove selected RAM disk(s)

• AMD PBS:

  • AMD Firmware Version: displays AMDs firmware information

  • PCI Express Configurations:

    • Pcie Dxio Timing ControlEnable: Disabled / Enabled

    • PCIe x4 Slot-1: Disabled / Enabled

    • AMD XGBE Path Selection: On Board Ports / Add In Card / Disabled

    • XGBE Port0/1 controller: RJ45 / SFP

    • XGBE Port0/1 Mode Selection: 10G/1G Backplane / 2.5G Backplane / SFP+ connector / Backplane AN OFF

    • XGBE Port0/1 Speed Selection: 1G / 10G / '10G/1G' / 100Mbps / 10Mbps

    • PXE BOOT: PORT 0 / PORT 1

    • PCIE 2x8 slots: Disabled / Enabled

    • M.2/PCIe Slot: M.2 NVMe (x4) / M.2 NVMe (x2) / PCIe Slot-3 (x4)

    • PCIe GPP Slot Hotplug support: Disabled / Enabled

    • PCIe dGPU Slot Hotplug support: Disabled / Enabled

    • NVMe RAID mode: Disabled / Enabled

  • Power Saving Configurations:

  • Graphics Configurations:

  • Display Configurations:

  • USB/Thunderbolt Configurations:

  • Audio Configurations:

  • I2C Configurations:

  • Thermal Configurations:

  • MP2 Configurations:

  • Debug Configurations:

  • AMD PMF Settings:

  • RAS:

  • Above 4GB MMIO Limit:

  • 5V_S5 voltage:

  • AMD KVM Mouse Protocol:

  • Processor Aggregator Device:

  • APIC Software Enable:

  • Dynamic P3T limit:

  • PD Firmware Update:

• AMD CBS:

  • CPU Common Options:

  • DF Common Options:

  • UMC Common Options:

  • NBIO Common Options:

  • FCH Common Options:

  • SMU Common Options:

    • System Configuration: Auto / 10W / 15W / 25W / 35W / 45W / 54W

    • Sustained Power Limit: [manual]

    • PPT Control: Auto / Manual (opens manual value input option)

    • STAPM Control: Auto / Manual (opens manual value input option)

    • Thermal Control: Auto / Manual (opens manual value input option)

    • TDC Control: Auto / Manual (opens manual value input option)

    • EDC Control: Auto / Manual (opens manual value input option)

    • PSI3 Control: Auto / Manual (opens manual value input option)

    • PROCHOT Control: Auto / Manual (opens manual value input option)

    • STT Control: Auto / Manual (opens manual value input option)

    • Fan Control: Auto / Manual (opens manual value input option)

    • VDDP Voltage Control: Auto / Manual (opens manual value input option)

    • VDDM Voltage Control: Auto / Manual (opens manual value input option)

    • SmartShift Control:

      • SmartShift Control: Auto / Manual(opens more options)

        • SmartShift Enable: Auto / Disabled / Enabled

        • APU Only sPPT Limit: [manual]

        • Sustained PowerLimit: [manual]

        • Fast PPT Limit: [manual]

        • Slow PPT Limit: [manual]

    • Zstates (Z9 and Z10): Disabled / Enabled / Auto

  • SOC Miscellaneous Control:

• Displays 4 Intel NICs if they are present and flashed:

  • when chosen displays brief NIC info, link status and MAC address.

• Driver Health: displays Intel NICs driver status: Healthy / Not Healty.

Chipset screen:

• South Bridge:

  • SB USB configuration, enable disable different USB port options.

• GFX Configuration:

  • NOT SUPPORTED

• North Bridge:

  • DDR Memmory data.

Security screen:

• change Administrator Password.

• change User Password.

• HDD Security Configuration: Displays NVME / HDD security info

• secure boot options:

  • enable/disable secure boot.

  • secure boot mode.

Boot screen:

• In Boot Configuration you can:

  • choose the bios wait time before it continues booting.

  • choose NumLock state on boot process enabled/disabled.

  • choose quiet boot options.

• In Boot Option Priorities you can:

  • choose boot order

  • enable/disable fast boot

  • choose SATA properties

  • enable/disable NVME support

  • enable/disable VGA support

  • choose USB support properties

  • nable/disabl PS2 devices support

  • enable/disable Network stack support

  • enable/disable USB Mass Storage support

Save & Exit screen:

• In Save options you can:

  • save, discard changes made in the BIOS configuration.

  • reset the device and exit BIOS and continue the boot process.

• In Default Options you can:

  • save user configurations.

  • restore default configuration.

• In Boot Override you can:

  • choose boot device, disregarding the chosen boot order.