...
SGMII port 0 / HS SGMII port0, RXAUI and XFI/10GBASE
SGMII port 1 and HS SGMII port 1
SGMII port 2 and HS SGMII port 2
CP0 MPP[62:0]
MPP # | Pin # | Pin Description | Notes |
|---|---|---|---|
AP_MPP[0] | AP10 | EMMC_CLK | 1.8V, serial 22ohm resistor |
AP_MPP[1] | AT10 | EMMC_CMD | 1.8V, 10K PU |
AP_MPP[2] | AP16 | EMMC_D0 | 1.8V, 10K PU |
AP_MPP[3] | AP18 | EMMC_D1 | 1.8V, 10K PU |
AP_MPP[4] | AT16 | EMMC_D2 | 1.8V, 10K PU |
AP_MPP[5] | AP14 | EMMC_D3 | 1.8V, 10K PU |
AP_MPP[6] | AP12 | EMMC_DS | RCLK, 10K PD |
AP_MPP[7] | AT14 | EMMC_D4 | 1.8V, 10K PU |
AP_MPP[8] | AT12 | EMMC_D5 | 1.8V, 10K PU |
AP_MPP[9] | AT18 | EMMC_D6 | 1.8V, 10K PU |
AP_MPP[10] | AV18 | EMMC_D7 | 1.8V, 10K PU |
AP_MPP[11] | AY18 | UART_AP_TX | PD - Reset strap |
AP_MPP[12] | BA17 | EMMC_RST | 1.8V, 10K PD |
AP_MPP[19] | AW17 | UART_AP_RX | 3.3V thorough NTB0102GD level shifter |
MPP[0] | AY38 | RGMII_RXD3 | |
MPP[1] | AV38 | RGMII_RXD2 | |
MPP[2] | AW39 | RGMII_RXD1 | |
MPP[3] | AY40 | RGMII_RXD0 | |
MPP[4] | AW41 | RGMII_RXCTL | |
MPP[5] | BA39 | RGMII_RXCLK | |
MPP[6] | AW35 | RGMII_TXD3 | |
MPP[7] | AY36 | RGMII_TXD2 | |
MPP[8] | BA37 | RGMII_TXD1 | |
MPP[9] | AW37 | RGMII_TXD0 | |
MPP[10] | BA35 | RGMII_TXCTL | |
MPP[11] | AV36 | RGMII_TXCLK | |
MPP[12] | AV32 | SPI1_CP0_CS1_N | |
MPP[13] | AY34 | SPI1_CP0_MISO | |
MPP[14] | AT36 | SPI1_CP0_CS0_N | |
MPP[15] | AT32 | SPI1_CP0_MOSI | CPU Subsystem Clock |
MPP[16] | AV34 | SPI1_CP0_CLK | CPU Subsystem Clock |
MPP[17] | BA29 | CP0_SYS_PLL_SEL2 | CPU Subsystem Clock |
MPP[18] | AW29 | CP0_BOOT_MODE_SEL0 | CPU Subsystem Clock |
MPP[19] | AV30 | CP0_BOOT_MODE_SEL1 | Boot mode strap |
MPP[20] | BA31 | CP0_BOOT_MODE_SEL2 | Boot mode strap |
MPP[21] | AT30 | CP0_BOOT_MODE_SEL3 | Boot mode strap |
MPP[22] | AY30 | CP0_BOOT_MODE_SEL4 | Boot mode strap |
MPP[23] | AP32 | CP0_BOOT_MODE_SEL5 / SMB_ALERT_N | Boot mode strap |
MPP[24] | AP34 | CP0_MPP24 | 3.3V |
MPP[25] | AT34 | CP0_MPP25 | Reset strap |
MPP[26] | AT38 | CP0_MPP26 | Reset strap |
MPP[27] | AW31 | CP0_MPP27 | 3.3V |
MPP[28] | AY32 | CP0_PTP_PULSE | |
MPP[29] | BA33 | CP0_PTP_CLK_IN | |
MPP[30] | AW33 | CP0_PTP_PCLK_OUT | |
MPP[31] | AP36 | CP0_MPP31 | 3.3V |
MPP[32] | H30 | CP0_MPP32 | 3.3V |
MPP[33] | C39 | CP0_MPP33 | 3.3V |
MPP[34] | C41 | CP0_MPP34 | 3.3V |
MPP[35] | F32 | I2C1_CP0_SDA | 3.3V, 2.2K PU |
MPP[36] | H32 | I2C1_CP0_SCL | 3.3V, 2.2K PU |
MPP[37] | F34 | I2C0_CP0_SCL | 3.3V, 2.2K PU |
MPP[38] | H34 | I2C0_CP0_SDA | 3.3V, 2.2K PU |
MPP[39] | F30 | CP0_MPP39 | 3.3V |
MPP[40] | F36 | RCVR1_CLK_CP0 | 3.3V, 25MHz for SYNC-E connected to J1 |
MPP[41] | H36 | VHV_EN | 3.3V, 2.2K PD |
MPP[42] | E39 | CP0_MPP42 | 3.3V |
MPP[43] | D30 | CP0_MPP43 | 3.3V |
MPP[44] | D38 | CP0_MPP44 | 1.8V, Reset Strap |
MPP[45] | A39 | CP0_MPP45 | 1.8V, Reset strap |
MPP[46] | C37 | SYS_PLL_SEL3 | CPU Subsystem Clock |
MPP[47] | A37 | SMI_CP0_MDC | 1.8V, Reset strap, PD |
MPP[48] | B40 | CP0_MPP48 | 1.8V, Reset strap |
MPP[49] | B38 | SMI_CP0_MDIO | 1.8V, 2.2K PU |
MPP[50] | C35 | UART2_TX | 3.3V thorough NTB0102GD level shifter |
MPP[51] | D34 | UART2_RX | 3.3V thorough NTB0102GD level shifter |
MPP[52] | A35 | CP0_MPP52 | 1.8V |
MPP[53] | B36 | DDR_SPD_STRAP | 1.8V, SPD DDR configuration loading from EEPROM |
MPP[54] | D36 | CP0_RCVR2_CLK | 25MHz for SYNC-E connected to PHY |
MPP[55] | B34 | SD_CARD_DETECT_N | 3.3V, 2.2K PU |
MPP[56] | D32 | SD_CLK | 3.3V |
MPP[57] | B32 | SD_CMD | 3.3V |
MPP[58] | A33 | SD_D0 | 3.3V |
MPP[59] | C33 | SD_D1 | 3.3V |
MPP[60] | A31 | SD_D2 | 3.3V |
MPP[60] | C31 | SD_D3 | 3.3V |
MPP[62] | B30 | NC |
...
Notes | Driving IC | Schematics Pin Name | Pin Number | Pin Number | Schematics Pin Name | Driving IC | Notes |
|---|---|---|---|---|---|---|---|
GND (FIXED) | 2 | 1 | GND (FIXED) | ||||
No on-board serial capacitor | AP_MCI0_RX_CP1_N2 | 4 | 3 | AP_MCI0_TX_CP1_P0 | No on-board serial capacitor | ||
No on-board serial capacitor | AP_MCI0_RX_CP1_P2 | 6 | 5 | AP_MCI0_TX_CP1_N0 | No on-board serial capacitor | ||
GND (FIXED) | 8 | 7 | GND (FIXED) | ||||
No on-board serial capacitor | AP_MCI0_RX_CP1_N1 | 10 | 9 | REFCLK_MCI0_CP1_N | No on-board serial capacitor | ||
No on-board serial capacitor | AP_MCI0_RX_CP1_P1 | 12 | 11 | REFCLK_MCI0_CP1_P | No on-board serial capacitor | ||
GND (FIXED) | 14 | 13 | GND (FIXED) | ||||
No on-board serial capacitor | AP_MCI0_RX_CP1_N0 | 16 | 15 | AP_MCI0_TX_CP1_P1 | No on-board serial capacitor | ||
No on-board serial capacitor | AP_MCI0_RX_CP1_P0 | 18 | 17 | AP_MCI0_TX_CP1_N1 | No on-board serial capacitor | ||
GND (FIXED) | 20 | 19 | GND (FIXED) | ||||
No on-board serial capacitor | AP_MCI0_RX_CP1_P3 | 22 | 21 | AP_MCI0_TX_CP1_P2 | No on-board serial capacitor | ||
No on-board serial capacitor | AP_MCI0_RX_CP1_N3 | 24 | 23 | AP_MCI0_TX_CP1_N2 | No on-board serial capacitor | ||
GND (FIXED) | 26 | 25 | GND (FIXED) | ||||
No on-board serial capacitor | 28 | 27 | AP_MCI0_TX_CP1_P3 | No on-board serial capacitor | |||
30 | 29 | AP_MCI0_TX_CP1_N3 | No on-board serial capacitor | ||||
No on-board serial capacitor | GND (FIXED) | 32 | 31 | GND (FIXED) | |||
34 | 33 | ||||||
36 | 35 | 5V_MGT | Connected to on board STM32 for management | ||||
38 | 37 | POWER_OFF | 3.3V, connected to EFUSE | ||||
GND (FIXED) | 40 | 39 | GND (FIXED) | ||||
Connected to on board STM32 for management | USB_MCU_DP | 42 | 41 | AP_MCI1_TX_CP2_P3 | No on-board serial capacitor | ||
Connected to on board STM32 for management | USB_MCU_DM | 44 | 43 | AP_MCI1_TX_CP2_N3 | No on-board serial capacitor | ||
GND (FIXED) | 46 | 45 | GND (FIXED) | ||||
No on-board serial capacitor | AP_MCI1_RX_CP2_P0 | 48 | 47 | AP_MCI1_TX_CP2_N0 | No on-board serial capacitor | ||
No on-board serial capacitor | AP_MCI1_RX_CP2_N0 | 50 | 49 | AP_MCI1_TX_CP2_P0 | No on-board serial capacitor | ||
GND (FIXED) | 52 | 51 | GND (FIXED) | ||||
No on-board serial capacitor | AP_MCI1_RX_CP2_P1 | 54 | 53 | REFCLK_MCI1_CP2_N | No on-board serial capacitor | ||
No on-board serial capacitor | AP_MCI1_RX_CP2_N1 | 56 | 55 | REFCLK_MCI1_CP2_P | No on-board serial capacitor | ||
GND (FIXED) | 58 | 57 | GND (FIXED) | ||||
No on-board serial capacitor | AP_MCI1_RX_CP2_P3 | 60 | 59 | AP_MCI1_TX_CP2_P1 | No on-board serial capacitor | ||
No on-board serial capacitor | AP_MCI1_RX_CP2_N3 | 62 | 61 | AP_MCI1_TX_CP2_N1 | No on-board serial capacitor | ||
GND (FIXED) | 64 | 63 | GND (FIXED) | ||||
No on-board serial capacitor | AP_MCI1_RX_CP2_N2 | 66 | 65 | AP_MCI1_TX_CP2_N2 | No on-board serial capacitor | ||
No on-board serial capacitor | AP_MCI1_RX_CP2_P2 | 68 | 67 | AP_MCI1_TX_CP2_P2 | No on-board serial capacitor | ||
GND (FIXED) | 70 | 69 | GND (FIXED) |
Documentation
| Attachments | ||||
|---|---|---|---|---|
|