Download the AFU Utility from AMIs website, here select APTIO V AMI FIRMWARE UPDATE UTILITY: AMI Utilities
Extract the .zip file
Go to:
Aptio_V_AMI_Firmware_Update_Utility/afu/afuefi/64
Run:
unzip AfuEfi64.zip -d AfuEfi64
Cd AfuEfi64
create bootable USB EFI drive. See How to create an EFI-shell bootable USB drive
Move the
and the signed .BIN files to your installed OS
Option 1: scp to current OS
boot Bedrock to OS
run:
ifconfig
check your devices ip address
on your pc run:
scp /path/to/local/AfuEfix64.efi username@remote_host_ip:/boot/efi/
scp /path/to/local/BIOS_Image.BIN username@remote_host_ip:/boot/efi/
Option 2: USB Drive
copy the files to the USB Drive you created in the Create EFI shell bootable USB drive section
Boot Bedrock to EFI shell
Identify your drive as FS#: (where # could be 1,2,3,…..)
Select your drive by running:
FS#:
You can navigate to your files using: 'ls' and 'cd' (if you chose to place in a different directory)
Update:
AfuEfix64.efi YOUR_BIOS_IMAGE.BIN /P /B /K /CAPSULE
Example:
AfuEfix64.efi BIOS_BDV3000_V21_SIGNED.BIN /P /B /K /CAPSULE
press y to restart the system
In BIOS environment set:
Reset NVRAM: Enabled
Boot Block Update : Enabled
Select “Proceed with flash update“
After the update is finished, press any key to reboot the system