View Source

Developer Center > Bedrock V3000 BIOS Settings > image-20230509-172015.png

Main screen:

bios information
system language
System Date
System Time

Developer Center > Bedrock V3000 BIOS Settings > image-20230509-171759.png

Advanced screen:

enable/disable tpm
enable/disable PCR Banks
clear TPM pending operation
enable/disable Platform Hierarchy
enable/disable Storage Hierarchy
enable/disable Endorsement Hierarchy
Device Select select (tpm version)
enable/disable Disable Block Sid

choose tpm device
erase ftpm

enable/disable ACPI Auto Configuration
enable/disable Hibernation: enables to go into S4 sleep state
ACPI Sleep State: decide what ot do on sleep suspend to RAM / suspend disabled
enable/disable Lock Legacy Resources

Wake system from S5: Disabled / Fixed Time / Dynamic Time

enable/disable Password protection of Runtime Variables

enable/disable Console Redirection
Console Redirection Settings:
- Terminal Type (BIOS visual personalization): VT100 / VT100Plus / VT-UTF8 / ANSI
- Bits per second: 9600 / 19200 / 38400 / 57600 / 115200
- Data Bits: 7 / 8
- Parity: None / Even / Odd / Mark / Space
- Stop Bits: 1 / 2
- Flow Control: None / Hardware RTS/CTS
- VT-UTF8 Combo Key Support: Disabled / Enabled
- Recorder Mode: Disabled / Enabled
- Resolution 100x31: Disabled / Enabled
- Putty KeyPad: VT100 / LINUX / XTERMR6 / SCO / ESCN / VT400
Console Redirection EMS: Disabled / Enabled (opens configuration options)
- Terminal Type EMS: VT100 / VT100Plus / VT-UTF8 / ANSI
- Bits per second EMS: 9600 / 19200 / 57600 / 115200
- Flow Control EMS: None / 'Hardware RTS/CTS ' / Software Xon/Xoff

PSS Support: Disabled / Enabled
PPC Adjustment: PState 0 / PState 1 / PState 2
NX Mode: Disabled / Enabled
SVM Mode: Disabled / Enabled
Node 0 Information (opens new window with memory information related to node 0)

NONE

Debug Port Table: Disabled / Enabled
Debug Port Table 2: Disabled / Enabled

WARNING:
Changing Device(s) Option ROM dispatch policy may affect system’s ability to post and/or boot!
PROCEED WITH CAUTION!

Restore if Failure: Disabled / Enabled (ifenaabled and system fails to boot it will restore this and CSM screens settings to default)
Primary Video Ignore: Disabled / Enabled
On Board Network Controller: Disabled / Enabled
Slot #32 Mass Storage Controller: Disabled / Enabled
Slot #33 Mass Storage Controller: Disabled / Enabled
Slot #34 Network Controller: Disabled / Enabled
Slot #49 Network Controller: Disabled / Enabled
Slot #51 Network Controller: Disabled / Enabled

WARNING:
Changing PCI Device(s) settings may have unwanted side effects! System may HANG!
PROCEED WITH CAUTION.

Above 4G Decoding: Disabled / Enabled
Re-Size BAR Support: Disabled / Enabled
SR-IOV Support: Disabled / Enabled
BME DMA Mitigation: Disabled / Enabled
Hot-Plug Support: Disabled / Enabled

Legacy USB Support: Disabled / Enabled
XHCI Hand-off: Disabled / Enabled
USB Mass Storage Driver Support: Disabled / Enabled
USB transfer time-out: 1 sec / 5 sec / 10 sec / 20 sec
Device reset time-out: 10 sec / 20 sec / 30 sec / 40 sec
Device power-up delay: Auto / Manual (opens another option)
- Device power-up delay in seconds: [your custom delay]
list of USB mass storage devices with option to choose their type:
Auto / Floppy / Forced FDD / Hard Disk / CD-ROM

Network Stack: Disabled / Enabled (opens list of options)
- IPv4 PXE Support: Disabled / Enabled
- IPv4 HTTP Support: Disabled / Enabled
- IPv6 PXE Support: Disabled / Enabled
- IPv6 HTTP Support: Disabled / Enabled
- PXE boot wait time: [your custom wait time]
- Media detect count: [your custom retry count]

lists your NVME drives, and allows you to run tests also shows last test results and drive data:
- Self Test Option: Short / Extended
- Self Test Action: Controller Only Test / Controller and NameSpace Test
- Run Device Self Test

Onboard PCIE LAN PXE ROM: Disabled / Enabled

PCI-E Port:

Pcie Port Control: Disabled / Enabled (opens a menu for each PCI-E device)

Device $ Fun $: Disabled / Enabled / Auto

ASPM Mode(Dev#$/Func#$): Disabled / L0s Entry / L1 Entry / L0s And L1 Entry / Auto

Hotplug Mode(Dev#$/Func#$): Disabled / Hotplug Basic / Hotplug Server / Hotplug Enhanced / Hotplug Inboard / Auto

PCR7 WA Support: Disabled / Enabled / Auto

SDEV ACPI: Disabled / Enabled

Disk Memory Type: Boot Service Data / Reserved
Create raw: Create a new RAM disk with the given starting and ending address.
Create from file: Create a new RAM disk from a file, opens a menu with all your storage devices to choose.
Remove selected RAM disk(s)

add / remove client certificate

AMD Firmware Version: displays AMDs firmware information
PCI Express Configurations:
- Pcie Dxio Timing ControlEnable: Disabled / Enabled
- PCIe x4 Slot-1: Disabled / Enabled
- AMD XGBE Path Selection: On Board Ports / Add In Card / Disabled
- XGBE Port0/1 controller: RJ45 / SFP
- XGBE Port0/1 Mode Selection: 10G/1G Backplane / 2.5G Backplane / SFP+ connector / Backplane AN OFF
- XGBE Port0/1 Speed Selection: 1G / 10G / '10G/1G' / 100Mbps / 10Mbps
- PXE BOOT: PORT 0 / PORT 1
- PCIE 2x8 slots: Disabled / Enabled
- M.2/PCIe Slot: M.2 NVMe (x4) / M.2 NVMe (x2) / PCIe Slot-3 (x4)
- PCIe GPP Slot Hotplug support: Disabled / Enabled
- PCIe dGPU Slot Hotplug support: Disabled / Enabled
- NVMe RAID mode: Disabled / Enabled
Power Saving Configurations:
- S3/Modern Standby Support: S3 Enable / Modern Standby Enable
- Wake on PME: determines the action when system power is off and PCI enable wake up event occurs. Disabled / Enabled
- Internal PCIe GPP 0 D3: Disabled / Enabled
- - SOC GPU D3: Disabled / Enabled
  - SOC HD Audio D3: Disabled / Enabled
  - SOC USB3.1 D3: Disabled / Enabled
  - SOC ACP D3: Disabled / Enabled
  - SOC Azalia D3: Disabled / Enabled
- Internal PCIe GPP 2 D3: Disabled / Enabled
  - SOC USB2.0 D3: Disabled / Enabled
  - SOC USB3.1 for USB4 D3: Disabled / Enabled
  - SOC USB4 D3: Disabled / Enabled
- Internal USB4 PCIe Tunneling D3: enable internal USB4 PCIe tunneling D3 abd add into PEP Device dependency list. Disabled / Enabled
  - SOC USB4 PCIe Endpoint D3: Disabled / Enabled
- Unused GPP Clocks Off: Disabled / Enabled
- Clock PM: CLK_REQ0: Disabled / Enabled
- Clock PM: CLK_REQ1: Disabled / Enabled
- Clock PM: CLK_REQ2: Disabled / Enabled
- Clock PM: CLK_REQ3: Disabled / Enabled
- Clock PM: CLK_REQ4: Disabled / Enabled
- Clock PM: CLK_REQ5: Disabled / Enabled
- Clock PM: CLK_REQ6: Disabled / Enabled
- Z-states support on non-Z10 capable PCIe: Disabled / Enabled
Graphics Configurations:
- EVAL Slot Power Enable: Disabled / Enabled
- EVAL CARD T-Diode Routing Select: EC / APU SMBUS0
- D3Cold Support: Disabled / Enabled
- NVIDIA DGPU Power Enable: Disabled / Enabled
- Discrete GPU _DSM Function A: Disabled / Enabled
- Discrete GPU _DSM Function B: Disabled / Enabled
- Non-Eval Discrete GPU Support: Disabled / Enabled
- Discrete GPU HPD Circuitry: OR Circuitry / Pulse Circuitry
- Discrete GPU's Audio: Disabled / Keep ROM Strap Setting
- Discrete GPU's USB Port: Keep Default Setting / Disabled
- Discrete GPU's SSID/SVID: Program by Vendor / Keep Default Setting
  - Discrete GPU's VGA SSID/SVID: [manual]
  - Discrete GPU's AUDIO SSID/SVID: [manual]
- Discrete GPU BOMACO Support: Disabled / Enabled
  - BLINK LED: Disabled / Enabled
- ATIF Function 23 Support: Disabled / Enabled
- Primary Video Adaptor: Ext Graphics (PEG) / Int Graphics (IGD)
Display Configurations:
- DP0 Select: Default (DP) / DP display / HDMI display
- DP1 Select: Default (DP) / DP display / HDMI display
  - Adjust DP Caps: Soc Default / Cap override
- DP2: Default (DP with TypeC) / EDP display / HDMI display / DP with TypeC display / DP without TypeC display
  - Adjust DP Caps: Soc Default / Cap override
- DP2 Over USBC2: DP with TypeC display / Default (DP with TypeC) / DP without TypeC display
- DP3/HDMI1/USB6: USB / Default (DP without TypeC) / DP display / HDMI display
USB/Thunderbolt Configurations:
- PD USB4 Control Enable/Disable: Disabled / Enabled
- USB4 Bus Reserved:
- USB4 Non-Prefetch Memory Reserved: [manual]
- USB4 non-Prefetch MMIO align (0 ~ 65534 MB): [manual]
- USB4 Prefetch Memory Reserved: [manual]
- USB4 Prefetch MMIO align (0 ~ 65534 MB): [manual]
- USB Camera Enable: Disabled / Enabled
- USB Finger Printer Enable: Disabled / Enabled
- UCSI Support: Disabled / Enabled
- USBC Port Harware Disable Support: Disabled / Enabled
- Reconfig Rebalance Resources by OS: Disabled / Enabled
- PD Thunderbolt3 Alt Mode: Disabled / Enabled
- USB4 ACPI _DEP Support: Disabled / Enabled
Audio Configurations:
- Wake On Voice: Disabled / Enabled
- ACP Power Gating: Disabled / Enabled
- ACP CLock Gating: Disabled / Enabled
- SoundWire SSDT Support: Disabled / Enabled
- TDM2_DIN Pull High: Disabled / Enabled
I2C Configurations:
- MITT/WITT Selection: Both disable / WITT Only / MITT Only
Thermal Configurations:
- APU PROCHOT# setting:
  Enable APU_PROCHOT# in pure-DC case /
  Disable APU_PROCHOT# /
  Enable APU_PROCHOT# in pure-AC case /
  Enable APU_PROCHOT# in either pure-DC or pure-AC case (not AC+DC)
- AMD DPTC interface: Disabled / Enabled
- STT sensor reporting: Disabled / Enabled
MP2 Configurations:
- Power Sensors Routing Select: WALLE lite PDT / WALLE lite PM log
- Turn off Xtal (S3/S5): Disabled / Enabled
- Sensor Fusion User Mode Driver: Disabled / Enabled
- Allocate 100KB For MP2: Disabled / Enabled
- Wake On Human Presence detection WA: Disabled / Enabled
Debug Configurations:
- Serial Debug Message Under OS: Disabled / Enabled
- Debug Print In ASL: Disabled / Enabled
- iLA TraceMemoryEn: Disabled / Enabled
- StallForUnlock: Disabled / Enabled
AMD PMF Settings:
- AMD PMF Device Support: Disabled / Enabled (opens a list of options)
- APMF Function 1 Settings:
  - Time interval for PMF to send heartbeat signal to BIOS (seconds): [manual]
- APMF Function 3 Settings:
  - AMPF Function 3: Disabled / Enabled (opens a list of options)
    - AC_Best_Performance_Limit: [manual]
    - Fan_ID_AC_Best_Performance_Limit: [manual]
    - AC_Better_Performance_Limit: [manual]
    - Fan_ID_AC_Better_Performance_Limit: [manual]
    - AC_Better_Battery_Limit: [manual]
    - Fan_ID_AC_Better_Battery_Limit: [manual]
    - DC_Best_Performance_Limit: [manual]
    - Fan_ID_DC_Best_Performance_Limit: [manual]
    - DC_Better_Performance_Limit: [manual]
    - Fan_ID_DC_Better_Performance_Limit: [manual]
    - DC_Better_Battery_Limit: [manual]
    - Fan_ID_DC_Better_Battery_Limit: [manual]
    - DC_Battery_Saver_Limit: [manual]
    - Fan_ID_DC_Battery_Saver_Limit: [manual]
- APMF Function 4 Settings: Disabled / Enabled
- APMF Function 5 Settings: Disabled / Enabled (opens a list of options)
  - T_Balanced_to_Perf : [manual]
  - T_Perf_to_Balanced: [manual]
  - T_Quiet_to_Balanced: [manual]
  - T_Balanced_to_Quiet: [manual]
  - Pfloor_Perf: [manual]
  - Pfloor_Balanced: [manual]
  - Pfloor_Quiet: [manual]
  - P_delta_Balanced_to_Perf: [manual]
  - P_delta_Perf_to_Balanced: [manual]
  - P_delta_Quiet_to_Balanced: [manual]
  - P_delta_Balanced_to_Quiet: [manual]
  - STT_SkinTempLimit_APU_Perf_on_Lap: [manual]
  - STT_SkinTempLimit_HS2_Perf_on_Lap: [manual]
  - STT_SkinTempLimit_APU_Perf: [manual]
  - STT_SkinTempLimit_HS2_Perf: [manual]
  - STT_SkinTempLimit_APU_Balanced: [manual]
  - STT_SkinTempLimit_HS2_Balanced: [manual]
  - STT_SkinTempLimit_APU_Quiet: [manual]
  - STT_SkinTempLimit_HS2: [manual]
  - STTMinLimit_Perf_on_lap: [manual]
  - STTMinLimit_Perf: [manual]
  - STTMinLimit_Balanced: [manual]
  - STTMinLimit_Quiet: [manual]
  - FPPT_Perf_on_lap: [manual]
  - SPPT_Perf_on_lap: [manual]
  - SPL_Perf_on_lap: [manual]
  - SPPT_APUOnly_Perf_on_Lap: [manual]
  - FPPT_Perf: [manual]
  - SPPT_Perf: [manual]
  - SPL_Perf: [manual]
  - SPPT_APUOnly_Perf: [manual]
  - FPPT_Balanced: [manual]
  - SPPT_Balanced: [manual]
  - SPL_Balanced: [manual]
  - SPPT_APUOnly_Balanced: [manual]
  - FPPT_Quiet: [manual]
  - SPPT_Quiet: [manual]
  - SPL_Quiet: [manual]
  - SPPT_APUOnly_Quiet: [manual]
  - Fan_ID_Perf: [manual]
  - Fan_ID_Balanced: [manual]
  - Fan_ID_Quiet: [manual]
- APMF Function 6 Settings: Disabled / Enabled (opens a list of options)
  - ConditionTemp_In_Bag_Policy: [manual]
  - ConditionTemp_In_Bag_S4_Policy: [manual]
  - FPPT_In_Bag_Policy: [manual]
  - SPPT_In_Bag_Policy: [manual]
  - SPPT_ApuOnly_In_Bag_Policy: [manual]
  - SPL_In_Bag_Policy: [manual]
  - STTMinLimit_In_Bag_Policy: [manual]
  - STT_SkinTempLimit_APU_In_Bag_Policy: [manual]
  - STT_SkinTempLimit_HS2_In_Bag_Policy: [manual]
  - Fan_ID_In_Bag_Policy: [manual]
  - FPPT_In_Bag_Exit_Policy: [manual]
  - SPPT_In_Bag_Exit_Policy: [manual]
  - SPPT_ApuOnly_In_Bag_Exit_Policy: [manual]
  - SPL_In_Bag_Exit_Policy: [manual]
  - STTMinLimit_In_Bag_Exit_Policy: [manual]
  - STT_SkinTempLimit_APU_In_Bag_Exit_Policy: [manual]
  - STT_SkinTempLimit_HS2_In_Bag_Exit_Policy: [manual]
- APMF Function 9 Settings: Disabled / Enabled (opens a list of options)
  - fPPT_BestPerfAC: [manual]
  - sPPT_BestPerfAC: [manual]
  - sPPT_APUOnlyBestPerfAC: [manual]
  - SPL_BestPerfAC: [manual]
  - STTMinLimit_BestPerfAC: [manual]
  - STT_SkinTempLimit_APU_BestPerfAC: [manual]
  - STT_SkinTempLimit_HS2_BestPerfAC: [manual]
  - Fan_ID_BestPerfAC: [manual]
  - fPPT_BetterPerfAC: [manual]
  - sPPT_BetterPerfAC: [manual]
  - sPPT_APUOnlyBetterPerfAC: [manual]
  - SPL_BetterPerfAC: [manual]
  - STTMinLimit_BetterPerfAC: [manual]
  - STT_SkinTempLimit_APU_BetterPerfAC: [manual]
  - STT_SkinTempLimit_HS2_BetterPerfAC: [manual]
  - Fan_ID_BetterPerfAC: [manual]
  - fPPT_BetterBatteryAC: [manual]
  - sPPT_BetterBatteryAC: [manual]
  - sPPT_APUOnlyBetterBatteryAC: [manual]
  - SPL_BetterBatteryAC: [manual]
  - STTMinLimit_BetterBatteryAC: [manual]
  - SPL_BetterBatteryAC: [manual]
  - STTMinLimit_BetterBatteryAC: [manual]
  - STT_SkinTempLimit_APU_BetterBatteryAC: [manual]
  - STT_SkinTempLimit_HS2_BetterBatteryAC: [manual]
  - Fan_ID_BetterBatteryAC: [manual]
  - fPPT_BestPerfDC: [manual]
  - sPPT_BestPerfDC: [manual]
  - sPPT_APUOnlyBestPerfDC: [manual]
  - SPL_BestPerfDC: [manual]
  - STTMinLimit_BestPerfDC: [manual]
  - STT_SkinTempLimit_APU_BestPerfDC: [manual]
  - STT_SkinTempLimit_HS2_BestPerfDC: [manual]
  - Fan_ID_BestPerfDC: [manual]
  - fPPT_BetterPerfDC: [manual]
  - sPPT_BetterPerfDC: [manual]
  - sPPT_APUOnlyBetterPerfDC: [manual]
  - SPL_BetterPerfDC: [manual]
  - STTMinLimit_BetterPerfDC: [manual]
  - STT_SkinTempLimit_APU_BetterPerfDC: [manual]
  - STT_SkinTempLimit_HS2_BetterPerfDC: [manual]
  - Fan_ID_BetterPerfDC: [manual]
  - fPPT_BetterBatteryDC: [manual]
  - sPPT_BetterBatteryDC: [manual]
  - sPPT_APUOnlyBetterBatteryDC: [manual]
  - SPL_BetterBatteryDC: [manual]
  - STTMinLimit_BetterBatteryDC: [manual]
  - STT_SkinTempLimit_APU_BetterBatteryDC: [manual]
  - STT_SkinTempLimit_HS2_BetterBatteryDC: [manual]
  - Fan_ID_BetterBatteryDC: [manual]
  - fPPT_BatterySaverDC: [manual]
  - sPPT_BatterySaverDC: [manual]
  - sPPT_APUOnlyBetterBatteryDC: [manual]
  - SPL_BatterySaverDC: [manual]
  - STTMinLimit_BatterySaverDC: [manual]
  - STT_SkinTempLimit_APU_BatterySaverDC: [manual]
  - STT_SkinTempLimit_HS2_BatterySaverDC: [manual]
- APMF Function 11 Settings: Disabled / Enabled: [manual] (opens a list of options)
  - T_Perf_to_Turbo: [manual]
  - T_Balanced_to_Perf: [manual]
  - T_Quiet_to_Balanced: [manual]
  - T_Balanced_to_Quiet: [manual]
  - T_Perf_to_Balanced: [manual]
  - T_Turbo_to_Perf: [manual]
  - Pfloor_Turbo: [manual]
  - FPPT_Turbo: [manual]
  - SPPT_Turbo: [manual]
  - SPPT_APUOnly_Turbo: [manual]
  - SPL_Turbo: [manual]
  - STT_MinLimit_Turbo: [manual]
  - STT_SkinTempAPU_Turbo: [manual]
  - STT_SkinTempHS2_Turbo: [manual]
  - Fan_ID_Turbo: [manual]
  - Pfloor_Performance: [manual]
  - FPPT_Performance: [manual]
  - SPPT_Performance: [manual]
  - SPPT_APUOnly_Performance: [manual]
  - SPL_Performance: [manual]
  - STT_MinLimit_Performance: [manual]
  - STT_SkinTempAPU_Performance: [manual]
  - STT_SkinTempHS2_Performance: [manual]
  - Fan_ID_Performance: [manual]
  - Pfloor_Balanced: [manual]
  - FPPT_Balanced: [manual]
  - SPPT_Balanced: [manual]
  - SPPT_APUOnly_Balanced: [manual]
  - SPL_Balanced: [manual]
  - STT_MinLimit_Balanced: [manual]
  - STT_SkinTempAPU_Balanced: [manual]
  - STT_SkinTempHS2_Balanced: [manual]
  - Fan_ID_Balanced: [manual]
  - Pfloor_Quiet: [manual]
  - FPPT_Quiet: [manual]
  - SPPT_Quiet: [manual]
  - SPPT_APUOnly_Quiet: [manual]
  - SPL_Quiet: [manual]
  - STT_MinLimit_Quiet: [manual]
  - STT_SkinTempAPU_Quiet: [manual]
  - STT_SkinTempHS2_Quiet: [manual]
- APMF Function 12 Settings: Disabled / Enabled: [manual]
- APMF Function 13 Settings: Disabled / Enabled: [manual]
- APMF Function 14 Settings: Disabled / Enabled: [manual]
RAS:
- PCIe Root Port Corr Err Mask Reg: [manual]
- PCIe Root Port UnCorr Err Mask Reg: [manual]
- Pcie Port UnCorr Error Sev Reg: [manual]
- PCIe Device Corr Err Mask Reg: [manual]
- PCIe Device UnCorr Err Mask Reg: [manual]
- Pcie Device UnCorr Error Sev Reg: [manual]
Above 4GB MMIO Limit:
35bit (32GB)
36bit (64GB)
37bit (128GB)
38bit (256GB)
39bit (512GB)
40bit (1TB) default
41bit (2TB)
42bit (4TB)
43bit (8TB)
44bit (16TB)
45bit (32TB)
46bit (64TB)
47bit (128TB)
48bit (256TB)
5V_S5 voltage: 5v_ALW(default) / 5v_ALW +60mv / 5v_ALW +100mv
AMD KVM Mouse Protocol: Auto(default) / Simple / Absolute
Processor Aggregator Device: Disabled / Enabled
APIC Software Enable: Disabled / Enabled
Dynamic P3T limit: Enable for DC-only case (include fake DC) / Disabled / Enabled
PD Firmware Update: Disabled / Enabled

CPU Common Options:
- Prefetcher settings:
  - L1 Stream HW Prefetcher: Auto / Disabled / Enabled
  - 2 Stream HW Prefetcher: Auto / Disabled / Enabled
- Core Watchdog:
- Core Watchdog Timer Enable: Disabled / Enabled (opens more options)
  - Core Watchdog Timer Interval: Auto / 21.461s - 39us
  - Core Watchdog Timer Severity:
    Auto
    Fatal
    Uncorrected
    Deferred
    Corrected
    Transparent
    No Error
- CCD/Core/Thread Enablement:
  - Core control: Auto / ONE / TWO / THREE / FOUR / FIVE / SIX / SEVEN
- RedirectForReturnDis: Auto / 0 / 1
- Core Performance Boost: Auto / Disabled
- lobal C-state Control: Auto / Disabled / Enabled
- Opcache Control: Auto / Disabled / Enabled
- SEV ASID Count: Auto / 253 ASIDs / 509 ASIDs
- SEV-ES ASID Space Limit Control: Auto / manual (opens another option)
  - SEV-ES ASID Space Limit: [manual]
- Streaming Stores Control: Auto / Disabled / Enabled
- Local APIC Mode: Auto / xAPIC / x2APIC
- ACPI _CST C1 Declaration: Auto / Disabled / Enabled
- MCA error thresh enable: True / False
- MCA error thresh count: FF5 (default) [manual]
- SMU and PSP Debug Mode: Auto / Disabled / Enabled
- PPIN Opt-in: Auto / Disabled / Enabled
- Action on BIST Failure: Auto / Down-Core / Do nothing
- IBS hardware workaround: Auto / Down-Core / Do nothing
DF Common Options:
- Scrubber:
  - DRAM scrub time(hours): Auto / Disabled / 1h / 4h / 8h / 16h / 24h / 48h
  - Poison scrubber control: Auto / Disabled / Enabled
  - Redirect scrubber control: Auto / Disabled / Enabled
  - Redirect scrubber limit: Auto / Infinite / 2 / 4 / 8
  - DRAM map inversion: Auto / Disabled / Enabled
- Memory Addressing:
  - Memory interleaving size: Auto / 256 Bytes / 512 Bytes / 1 KB / 2 KB
- CC6 memory region encryption: Auto / Disabled / Enabled
- Memory Clear: Auto / Disabled / Enabled
- Disable DF to external downstream IP SyncFloodPropagation: Auto / Sync flood enabled / Sync flood disabled
- Disable DF sync flood propagation: Auto / Sync flood enabled / Sync flood disabled
- Freeze DF module queues on error: Auto / Disabled / Enabled
- DF Cstates: Auto / Disabled / Enabled
UMC Common Options:
NBIO Common Options:
FCH Common Options:
SMU Common Options:
- System Configuration (TDP): Auto / 10W / 15W / 25W / 35W / 45W / 54W
- Sustained Power Limit: [manual]
- PPT Control: Auto / Manual (opens manual value input option)
- STAPM Control: Auto / Manual (opens manual value input option)
- Thermal Control: Auto / Manual (opens manual value input option)
- TDC Control: Auto / Manual (opens manual value input option)
- EDC Control: Auto / Manual (opens manual value input option)
- PSI3 Control: Auto / Manual (opens manual value input option)
- PROCHOT Control: Auto / Manual (opens manual value input option)
- STT Control: Auto / Manual (opens manual value input option)
- Fan Control: Auto / Manual (opens manual value input option)
- VDDP Voltage Control: Auto / Manual (opens manual value input option)
- VDDM Voltage Control: Auto / Manual (opens manual value input option)
- SmartShift Control:
  - SmartShift Control: Auto / Manual(opens more options)
    - SmartShift Enable: Auto / Disabled / Enabled
    - APU Only sPPT Limit: [manual]
    - Sustained PowerLimit: [manual]
    - Fast PPT Limit: [manual]
    - Slow PPT Limit: [manual]
- Zstates (Z9 and Z10): Auto / Disabled / Enabled
SOC Miscellaneous Control:
- PSP RPMC Switch: Auto / Disabled / Enabled
- Firmware Anti-rollback (FAR):
  - Initial SPL value for FAR: [manual]
  - FAR Switch: Disabled / Enabled
- Rom Armor support: Auto / Disabled / Enabled
- ABL Console Out Control: Auto / Disabled / Enabled
- Secured-core Auto enablement: Auto / Disabled / Enabled
- Pluton (HSP) Options:
  - Pluton (HSP) X86 Firmware Support: Auto / Disabled / Enabled
  - Pluton (HSP) UART: Auto / Disabled / Enabled
  - Pluton (HSP) FIPS: Auto / Disabled / Enabled
  - Pluton (HSP) ACPI Fence Enable: Auto / True / False
- AIM-T Options:
  - AGESA MPM support:
    - KVM for Wired Manageability: Auto / Disabled / Enabled
    - Wireless Manageability: Auto / Disabled / Enabled (opens more options)
      - KVM for Wireless Manageability: Auto / Disabled / Enabled
      - TCR for Wireless Manageability: Auto / Disabled / Enabled
- Intrusion Detection:
  - Intrusion Detection settings: [manual] requires password to show settings
- Mixed DIMM config extended NUMA domain: Auto / Disabled / Enabled

Displays 4 Intel NICs if they are present and flashed:
- when chosen displays brief NIC info, link status and MAC address.
Driver Health: displays Intel NICs driver status: Healthy / Not Healty.

Developer Center > Bedrock V3000 BIOS Settings > image-20230509-171652.png

Chipset screen:
- South Bridge:
  - SB USB configuration, enable disable different USB port options.
- GFX Configuration:
  - NOT SUPPORTED
- North Bridge:
  - DDR Memmory data.

Developer Center > Bedrock V3000 BIOS Settings > image-20230509-171506.png

Security screen:
- change Administrator Password.
- change User Password.
- HDD Security Configuration: Displays NVME / HDD security info
- secure boot options:
  - enable/disable secure boot.
  - secure boot mode.

Developer Center > Bedrock V3000 BIOS Settings > image-20230509-171435.png

Boot screen:
- In Boot Configuration you can:
  - choose the bios wait time before it continues booting.
  - choose NumLock state on boot process enabled/disabled.
  - choose quiet boot options.
- In Boot Option Priorities you can:
  - choose boot order
  - enable/disable fast boot
  - choose SATA properties
  - enable/disable NVME support
  - enable/disable VGA support
  - choose USB support properties
  - nable/disabl PS2 devices support
  - enable/disable Network stack support
  - enable/disable USB Mass Storage support

Developer Center > Bedrock V3000 BIOS Settings > image-20230509-171043.png

Save & Exit screen:
- In Save options you can:
  - save, discard changes made in the BIOS configuration.
  - reset the device and exit BIOS and continue the boot process.
- In Default Options you can:
  - save user configurations.
  - restore default configuration.
- In Boot Override you can:
  - choose boot device, disregarding the chosen boot order.