View Source

Developer Center > Bedrock V3000 BIOS Settings > image-20230509-172015.png

Main screen:

bios information
system language
System Date
System Time

Developer Center > Bedrock V3000 BIOS Settings > image-20230509-171759.png

Advanced screen:

enable/disable tpm
enable/disable PCR Banks
clear TPM pending operation
enable/disable Platform Hierarchy
enable/disable Storage Hierarchy
enable/disable Endorsement Hierarchy
Device Select select (tpm version)
enable/disable Disable Block Sid

choose tpm device
erase ftpm

enable/disable ACPI Auto Configuration
enable/disable Hibernation: enables to go into S4 sleep state
ACPI Sleep State: decide what ot do on sleep suspend to RAM / suspend disabled
enable/disable Lock Legacy Resources

Wake system from S5: Disabled / Fixed Time / Dynamic Time

enable/disable Password protection of Runtime Variables

enable/disable Console Redirection
Console Redirection Settings:
- Terminal Type (BIOS visual personalization): VT100 / VT100Plus / VT-UTF8 / ANSI
- Bits per second: 9600 / 19200 / 38400 / 57600 / 115200
- Data Bits: 7 / 8
- Parity: None / Even / Odd / Mark / Space
- Stop Bits: 1 / 2
- Flow Control: None / Hardware RTS/CTS
- VT-UTF8 Combo Key Support: Disabled / Enabled
- Recorder Mode: Disabled / Enabled
- Resolution 100x31: Disabled / Enabled
- Putty KeyPad: VT100 / LINUX / XTERMR6 / SCO / ESCN / VT400
Console Redirection EMS: Disabled / Enabled (opens configuration options)
- Terminal Type EMS: VT100 / VT100Plus / VT-UTF8 / ANSI
- Bits per second EMS: 9600 / 19200 / 57600 / 115200
- Flow Control EMS: None / 'Hardware RTS/CTS ' / Software Xon/Xoff

PSS Support: Disabled / Enabled
PPC Adjustment: PState 0 / PState 1 / PState 2
NX Mode: Disabled / Enabled
SVM Mode: Disabled / Enabled
Node 0 Information (opens new window with memory information related to node 0)

NONE

Debug Port Table: Disabled / Enabled
Debug Port Table 2: Disabled / Enabled

WARNING:
Changing Device(s) Option ROM dispatch policy may affect system’s ability to post and/or boot!
PROCEED WITH CAUTION!

Restore if Failure: Disabled / Enabled (ifenaabled and system fails to boot it will restore this and CSM screens settings to default)
Primary Video Ignore: Disabled / Enabled
On Board Network Controller: Disabled / Enabled
Slot #32 Mass Storage Controller: Disabled / Enabled
Slot #33 Mass Storage Controller: Disabled / Enabled
Slot #34 Network Controller: Disabled / Enabled
Slot #49 Network Controller: Disabled / Enabled
Slot #51 Network Controller: Disabled / Enabled

WARNING:
Changing PCI Device(s) settings may have unwanted side effects! System may HANG!
PROCEED WITH CAUTION.

Above 4G Decoding: Disabled / Enabled
Re-Size BAR Support: Disabled / Enabled
SR-IOV Support: Disabled / Enabled
BME DMA Mitigation: Disabled / Enabled
Hot-Plug Support: Disabled / Enabled

Legacy USB Support: Disabled / Enabled
XHCI Hand-off: Disabled / Enabled
USB Mass Storage Driver Support: Disabled / Enabled
USB transfer time-out: 1 sec / 5 sec / 10 sec / 20 sec
Device reset time-out: 10 sec / 20 sec / 30 sec / 40 sec
Device power-up delay: Auto / Manual (opens another option)
- Device power-up delay in seconds: [your custom delay]
list of USB mass storage devices with option to choose their type:
Auto / Floppy / Forced FDD / Hard Disk / CD-ROM

Network Stack: Disabled / Enabled (opens list of options)
- IPv4 PXE Support: Disabled / Enabled
- IPv4 HTTP Support: Disabled / Enabled
- IPv6 PXE Support: Disabled / Enabled
- IPv6 HTTP Support: Disabled / Enabled
- PXE boot wait time: [your custom wait time]
- Media detect count: [your custom retry count]

lists your NVME drives, and allows you to run tests also shows last test results and drive data:
- Self Test Option: Short / Extended
- Self Test Action: Controller Only Test / Controller and NameSpace Test
- Run Device Self Test

dsadsadasdsda

Demo Board:
- Onboard PCIE LAN PXE ROM: Disabled / Enabled
- PCI-E Port:
  - Pcie Port Control: Disabled / Enabled (opens a menu for each PCI-E device)
    - Device $ Fun $: Disabled / Enabled / Auto
    - ASPM Mode(Dev#$/Func#$): Disabled / L0s Entry / L1 Entry / L0s And L1 Entry / Auto
    - Hotplug Mode(Dev#$/Func#$): Disabled / Hotplug Basic / Hotplug Server / Hotplug Enhanced / Hotplug Inboard / Auto
  - PCR7 WA Support: Disabled / Enabled / Auto
Secure Devices ACPI Table:
- SDEV ACPI: Disabled / Enabled
RAM Disk Configuration:
- Disk Memory Type: Boot Service Data / Reserved
- Create raw: Create a new RAM disk with the given starting and ending address.
- Create from file: Create a new RAM disk from a file, opens a menu with all your storage devices to choose.
- Remove selected RAM disk(s)
Tls Auth Configuration:
- add / remove client certificate
AMD PBS:
- AMD Firmware Version: displays AMDs firmware information
- PCI Express Configurations:
  - Pcie Dxio Timing ControlEnable: Disabled / Enabled
  - PCIe x4 Slot-1: Disabled / Enabled
  - AMD XGBE Path Selection: On Board Ports / Add In Card / Disabled
  - XGBE Port0/1 controller: RJ45 / SFP
  - XGBE Port0/1 Mode Selection: 10G/1G Backplane / 2.5G Backplane / SFP+ connector / Backplane AN OFF
  - XGBE Port0/1 Speed Selection: 1G / 10G / '10G/1G' / 100Mbps / 10Mbps
  - PXE BOOT: PORT 0 / PORT 1
  - PCIE 2x8 slots: Disabled / Enabled
  - M.2/PCIe Slot: M.2 NVMe (x4) / M.2 NVMe (x2) / PCIe Slot-3 (x4)
  - PCIe GPP Slot Hotplug support: Disabled / Enabled
  - PCIe dGPU Slot Hotplug support: Disabled / Enabled
  - NVMe RAID mode: Disabled / Enabled
- Power Saving Configurations:
  - S3/Modern Standby Support: S3 Enable / Modern Standby Enable
  - Wake on PME: determines the action when system power is off and PCI enable wake up event occurs. Disabled / Enabled
  - Internal PCIe GPP 0 D3: Disabled / Enabled
  - - SOC GPU D3: Disabled / Enabled
    - SOC HD Audio D3: Disabled / Enabled
    - SOC USB3.1 D3: Disabled / Enabled
    - SOC ACP D3: Disabled / Enabled
    - SOC Azalia D3: Disabled / Enabled
  - Internal PCIe GPP 2 D3: Disabled / Enabled
    - SOC USB2.0 D3: Disabled / Enabled
    - SOC USB3.1 for USB4 D3: Disabled / Enabled
    - SOC USB4 D3: Disabled / Enabled
  - Internal USB4 PCIe Tunneling D3: enable internal USB4 PCIe tunneling D3 abd add into PEP Device dependency list. Disabled / Enabled
    - SOC USB4 PCIe Endpoint D3: Disabled / Enabled
  - Unused GPP Clocks Off: Disabled / Enabled
  - Clock PM: CLK_REQ0: Disabled / Enabled
  - Clock PM: CLK_REQ1: Disabled / Enabled
  - Clock PM: CLK_REQ2: Disabled / Enabled
  - Clock PM: CLK_REQ3: Disabled / Enabled
  - Clock PM: CLK_REQ4: Disabled / Enabled
  - Clock PM: CLK_REQ5: Disabled / Enabled
  - Clock PM: CLK_REQ6: Disabled / Enabled
  - Z-states support on non-Z10 capable PCIe: Disabled / Enabled
- Graphics Configurations:
  - EVAL Slot Power Enable: Disabled / Enabled
  - EVAL CARD T-Diode Routing Select: EC / APU SMBUS0
  - D3Cold Support: Disabled / Enabled
  - NVIDIA DGPU Power Enable: Disabled / Enabled
  - Discrete GPU _DSM Function A: Disabled / Enabled
  - Discrete GPU _DSM Function B: Disabled / Enabled
  - Non-Eval Discrete GPU Support: Disabled / Enabled
  - Discrete GPU HPD Circuitry: OR Circuitry / Pulse Circuitry
  - Discrete GPU's Audio: Disabled / Keep ROM Strap Setting
  - Discrete GPU's USB Port: Keep Default Setting / Disabled
  - Discrete GPU's SSID/SVID: Program by Vendor / Keep Default Setting
    - Discrete GPU's VGA SSID/SVID: [manual]
    - Discrete GPU's AUDIO SSID/SVID: [manual]
  - Discrete GPU BOMACO Support: Disabled / Enabled
    - BLINK LED: Disabled / Enabled
  - ATIF Function 23 Support: Disabled / Enabled
  - Primary Video Adaptor: Ext Graphics (PEG) / Int Graphics (IGD)
- Display Configurations:
  - DP0 Select: Default (DP) / DP display / HDMI display
  - DP1 Select: Default (DP) / DP display / HDMI display
    - Adjust DP Caps: Soc Default / Cap override
  - DP2: Default (DP with TypeC) / EDP display / HDMI display / DP with TypeC display / DP without TypeC display
    - Adjust DP Caps: Soc Default / Cap override
  - DP2 Over USBC2: DP with TypeC display / Default (DP with TypeC) / DP without TypeC display
  - DP3/HDMI1/USB6: USB / Default (DP without TypeC) / DP display / HDMI display
- USB/Thunderbolt Configurations:
  - PD USB4 Control Enable/Disable: Disabled / Enabled
  - USB4 Bus Reserved:
  - USB4 Non-Prefetch Memory Reserved: [manual]
  - USB4 non-Prefetch MMIO align (0 ~ 65534 MB): [manual]
  - USB4 Prefetch Memory Reserved: [manual]
  - USB4 Prefetch MMIO align (0 ~ 65534 MB): [manual]
  - USB Camera Enable: Disabled / Enabled
  - USB Finger Printer Enable: Disabled / Enabled
  - UCSI Support: Disabled / Enabled
  - USBC Port Harware Disable Support: Disabled / Enabled
  - Reconfig Rebalance Resources by OS: Disabled / Enabled
  - PD Thunderbolt3 Alt Mode: Disabled / Enabled
  - USB4 ACPI _DEP Support: Disabled / Enabled
- Audio Configurations:
  - Wake On Voice: Disabled / Enabled
  - ACP Power Gating: Disabled / Enabled
  - ACP CLock Gating: Disabled / Enabled
  - SoundWire SSDT Support: Disabled / Enabled
  - TDM2_DIN Pull High: Disabled / Enabled
- I2C Configurations:
  - MITT/WITT Selection: Both disable / WITT Only / MITT Only
- Thermal Configurations:
  - APU PROCHOT# setting:
    Enable APU_PROCHOT# in pure-DC case /
    Disable APU_PROCHOT# /
    Enable APU_PROCHOT# in pure-AC case /
    Enable APU_PROCHOT# in either pure-DC or pure-AC case (not AC+DC)
  - AMD DPTC interface: Disabled / Enabled
  - STT sensor reporting: Disabled / Enabled
- MP2 Configurations:
  - Power Sensors Routing Select: WALLE lite PDT / WALLE lite PM log
  - Turn off Xtal (S3/S5): Disabled / Enabled
  - Sensor Fusion User Mode Driver: Disabled / Enabled
  - Allocate 100KB For MP2: Disabled / Enabled
  - Wake On Human Presence detection WA: Disabled / Enabled
- Debug Configurations:
  - Serial Debug Message Under OS: Disabled / Enabled
  - Debug Print In ASL: Disabled / Enabled
  - iLA TraceMemoryEn: Disabled / Enabled
  - StallForUnlock: Disabled / Enabled
- AMD PMF Settings:
  - AMD PMF Device Support: Disabled / Enabled (opens a list of options)
  - APMF Function 1 Settings:
    - Time interval for PMF to send heartbeat signal to BIOS (seconds): [manual]
  - APMF Function 3 Settings:
    - AMPF Function 3: Disabled / Enabled (opens a list of options)
      - AC_Best_Performance_Limit: [manual]
      - Fan_ID_AC_Best_Performance_Limit: [manual]
      - AC_Better_Performance_Limit: [manual]
      - Fan_ID_AC_Better_Performance_Limit: [manual]
      - AC_Better_Battery_Limit: [manual]
      - Fan_ID_AC_Better_Battery_Limit: [manual]
      - DC_Best_Performance_Limit: [manual]
      - Fan_ID_DC_Best_Performance_Limit: [manual]
      - DC_Better_Performance_Limit: [manual]
      - Fan_ID_DC_Better_Performance_Limit: [manual]
      - DC_Better_Battery_Limit: [manual]
      - Fan_ID_DC_Better_Battery_Limit: [manual]
      - DC_Battery_Saver_Limit: [manual]
      - Fan_ID_DC_Battery_Saver_Limit: [manual]
  - APMF Function 4 Settings: Disabled / Enabled
  - APMF Function 5 Settings: Disabled / Enabled (opens a list of options)
    - T_Balanced_to_Perf : [manual]
    - T_Perf_to_Balanced: [manual]
    - T_Quiet_to_Balanced: [manual]
    - T_Balanced_to_Quiet: [manual]
    - Pfloor_Perf: [manual]
    - Pfloor_Balanced: [manual]
    - Pfloor_Quiet: [manual]
    - P_delta_Balanced_to_Perf: [manual]
    - P_delta_Perf_to_Balanced: [manual]
    - P_delta_Quiet_to_Balanced: [manual]
    - P_delta_Balanced_to_Quiet: [manual]
    - STT_SkinTempLimit_APU_Perf_on_Lap: [manual]
    - STT_SkinTempLimit_HS2_Perf_on_Lap: [manual]
    - STT_SkinTempLimit_APU_Perf: [manual]
    - STT_SkinTempLimit_HS2_Perf: [manual]
    - STT_SkinTempLimit_APU_Balanced: [manual]
    - STT_SkinTempLimit_HS2_Balanced: [manual]
    - STT_SkinTempLimit_APU_Quiet: [manual]
    - STT_SkinTempLimit_HS2: [manual]
    - STTMinLimit_Perf_on_lap: [manual]
    - STTMinLimit_Perf: [manual]
    - STTMinLimit_Balanced: [manual]
    - STTMinLimit_Quiet: [manual]
    - FPPT_Perf_on_lap: [manual]
    - SPPT_Perf_on_lap: [manual]
    - SPL_Perf_on_lap: [manual]
    - SPPT_APUOnly_Perf_on_Lap: [manual]
    - FPPT_Perf: [manual]
    - SPPT_Perf: [manual]
    - SPL_Perf: [manual]
    - SPPT_APUOnly_Perf: [manual]
    - FPPT_Balanced: [manual]
    - SPPT_Balanced: [manual]
    - SPL_Balanced: [manual]
    - SPPT_APUOnly_Balanced: [manual]
    - FPPT_Quiet: [manual]
    - SPPT_Quiet: [manual]
    - SPL_Quiet: [manual]
    - SPPT_APUOnly_Quiet: [manual]
    - Fan_ID_Perf: [manual]
    - Fan_ID_Balanced: [manual]
    - Fan_ID_Quiet: [manual]
  - APMF Function 6 Settings: Disabled / Enabled (opens a list of options)
    - ConditionTemp_In_Bag_Policy: [manual]
    - ConditionTemp_In_Bag_S4_Policy: [manual]
    - FPPT_In_Bag_Policy: [manual]
    - SPPT_In_Bag_Policy: [manual]
    - SPPT_ApuOnly_In_Bag_Policy: [manual]
    - SPL_In_Bag_Policy: [manual]
    - STTMinLimit_In_Bag_Policy: [manual]
    - STT_SkinTempLimit_APU_In_Bag_Policy: [manual]
    - STT_SkinTempLimit_HS2_In_Bag_Policy: [manual]
    - Fan_ID_In_Bag_Policy: [manual]
    - FPPT_In_Bag_Exit_Policy: [manual]
    - SPPT_In_Bag_Exit_Policy: [manual]
    - SPPT_ApuOnly_In_Bag_Exit_Policy: [manual]
    - SPL_In_Bag_Exit_Policy: [manual]
    - STTMinLimit_In_Bag_Exit_Policy: [manual]
    - STT_SkinTempLimit_APU_In_Bag_Exit_Policy: [manual]
    - STT_SkinTempLimit_HS2_In_Bag_Exit_Policy: [manual]
  - APMF Function 9 Settings: Disabled / Enabled (opens a list of options)
    - fPPT_BestPerfAC: [manual]
    - sPPT_BestPerfAC: [manual]
    - sPPT_APUOnlyBestPerfAC: [manual]
    - SPL_BestPerfAC: [manual]
    - STTMinLimit_BestPerfAC: [manual]
    - STT_SkinTempLimit_APU_BestPerfAC: [manual]
    - STT_SkinTempLimit_HS2_BestPerfAC: [manual]
    - Fan_ID_BestPerfAC: [manual]
    - fPPT_BetterPerfAC: [manual]
    - sPPT_BetterPerfAC: [manual]
    - sPPT_APUOnlyBetterPerfAC: [manual]
    - SPL_BetterPerfAC: [manual]
    - STTMinLimit_BetterPerfAC: [manual]
    - STT_SkinTempLimit_APU_BetterPerfAC: [manual]
    - STT_SkinTempLimit_HS2_BetterPerfAC: [manual]
    - Fan_ID_BetterPerfAC: [manual]
    - fPPT_BetterBatteryAC: [manual]
    - sPPT_BetterBatteryAC: [manual]
    - sPPT_APUOnlyBetterBatteryAC: [manual]
    - SPL_BetterBatteryAC: [manual]
    - STTMinLimit_BetterBatteryAC: [manual]
    - SPL_BetterBatteryAC: [manual]
    - STTMinLimit_BetterBatteryAC: [manual]
    - STT_SkinTempLimit_APU_BetterBatteryAC: [manual]
    - STT_SkinTempLimit_HS2_BetterBatteryAC: [manual]
    - Fan_ID_BetterBatteryAC: [manual]
    - fPPT_BestPerfDC: [manual]
    - sPPT_BestPerfDC: [manual]
    - sPPT_APUOnlyBestPerfDC: [manual]
    - SPL_BestPerfDC: [manual]
    - STTMinLimit_BestPerfDC: [manual]
    - STT_SkinTempLimit_APU_BestPerfDC: [manual]
    - STT_SkinTempLimit_HS2_BestPerfDC: [manual]
    - Fan_ID_BestPerfDC: [manual]
    - fPPT_BetterPerfDC: [manual]
    - sPPT_BetterPerfDC: [manual]
    - sPPT_APUOnlyBetterPerfDC: [manual]
    - SPL_BetterPerfDC: [manual]
    - STTMinLimit_BetterPerfDC: [manual]
    - STT_SkinTempLimit_APU_BetterPerfDC: [manual]
    - STT_SkinTempLimit_HS2_BetterPerfDC: [manual]
    - Fan_ID_BetterPerfDC: [manual]
    - fPPT_BetterBatteryDC: [manual]
    - sPPT_BetterBatteryDC: [manual]
    - sPPT_APUOnlyBetterBatteryDC: [manual]
    - SPL_BetterBatteryDC: [manual]
    - STTMinLimit_BetterBatteryDC: [manual]
    - STT_SkinTempLimit_APU_BetterBatteryDC: [manual]
    - STT_SkinTempLimit_HS2_BetterBatteryDC: [manual]
    - Fan_ID_BetterBatteryDC: [manual]
    - fPPT_BatterySaverDC: [manual]
    - sPPT_BatterySaverDC: [manual]
    - sPPT_APUOnlyBetterBatteryDC: [manual]
    - SPL_BatterySaverDC: [manual]
    - STTMinLimit_BatterySaverDC: [manual]
    - STT_SkinTempLimit_APU_BatterySaverDC: [manual]
    - STT_SkinTempLimit_HS2_BatterySaverDC: [manual]
  - APMF Function 11 Settings: Disabled / Enabled: [manual] (opens a list of options)
    - T_Perf_to_Turbo: [manual]
    - T_Balanced_to_Perf: [manual]
    - T_Quiet_to_Balanced: [manual]
    - T_Balanced_to_Quiet: [manual]
    - T_Perf_to_Balanced: [manual]
    - T_Turbo_to_Perf: [manual]
    - Pfloor_Turbo: [manual]
    - FPPT_Turbo: [manual]
    - SPPT_Turbo: [manual]
    - SPPT_APUOnly_Turbo: [manual]
    - SPL_Turbo: [manual]
    - STT_MinLimit_Turbo: [manual]
    - STT_SkinTempAPU_Turbo: [manual]
    - STT_SkinTempHS2_Turbo: [manual]
    - Fan_ID_Turbo: [manual]
    - Pfloor_Performance: [manual]
    - FPPT_Performance: [manual]
    - SPPT_Performance: [manual]
    - SPPT_APUOnly_Performance: [manual]
    - SPL_Performance: [manual]
    - STT_MinLimit_Performance: [manual]
    - STT_SkinTempAPU_Performance: [manual]
    - STT_SkinTempHS2_Performance: [manual]
    - Fan_ID_Performance: [manual]
    - Pfloor_Balanced: [manual]
    - FPPT_Balanced: [manual]
    - SPPT_Balanced: [manual]
    - SPPT_APUOnly_Balanced: [manual]
    - SPL_Balanced: [manual]
    - STT_MinLimit_Balanced: [manual]
    - STT_SkinTempAPU_Balanced: [manual]
    - STT_SkinTempHS2_Balanced: [manual]
    - Fan_ID_Balanced: [manual]
    - Pfloor_Quiet: [manual]
    - FPPT_Quiet: [manual]
    - SPPT_Quiet: [manual]
    - SPPT_APUOnly_Quiet: [manual]
    - SPL_Quiet: [manual]
    - STT_MinLimit_Quiet: [manual]
    - STT_SkinTempAPU_Quiet: [manual]
    - STT_SkinTempHS2_Quiet: [manual]
  - APMF Function 12 Settings: Disabled / Enabled: [manual]
  - APMF Function 13 Settings: Disabled / Enabled: [manual]
  - APMF Function 14 Settings: Disabled / Enabled: [manual]
- RAS:
  - PCIe Root Port Corr Err Mask Reg: [manual]
  - PCIe Root Port UnCorr Err Mask Reg: [manual]
  - Pcie Port UnCorr Error Sev Reg: [manual]
  - PCIe Device Corr Err Mask Reg: [manual]
  - PCIe Device UnCorr Err Mask Reg: [manual]
  - Pcie Device UnCorr Error Sev Reg: [manual]
- Above 4GB MMIO Limit:
  35bit (32GB)
  36bit (64GB)
  37bit (128GB)
  38bit (256GB)
  39bit (512GB)
  40bit (1TB) default
  41bit (2TB)
  42bit (4TB)
  43bit (8TB)
  44bit (16TB)
  45bit (32TB)
  46bit (64TB)
  47bit (128TB)
  48bit (256TB)
- 5V_S5 voltage: 5v_ALW(default) / 5v_ALW +60mv / 5v_ALW +100mv
- AMD KVM Mouse Protocol: Auto(default) / Simple / Absolute
- Processor Aggregator Device: Disabled / Enabled
- APIC Software Enable: Disabled / Enabled
- Dynamic P3T limit: Enable for DC-only case (include fake DC) / Disabled / Enabled
- PD Firmware Update: Disabled / Enabled
AMD CBS:
- CPU Common Options:
  - Prefetcher settings:
    - L1 Stream HW Prefetcher: Auto / Disabled / Enabled
    - 2 Stream HW Prefetcher: Auto / Disabled / Enabled
  - Core Watchdog:
  - Core Watchdog Timer Enable: Disabled / Enabled (opens more options)
    - Core Watchdog Timer Interval: Auto / 21.461s - 39us
    - Core Watchdog Timer Severity:
      Auto
      Fatal
      Uncorrected
      Deferred
      Corrected
      Transparent
      No Error
  - CCD/Core/Thread Enablement:
    - Core control: Auto / ONE / TWO / THREE / FOUR / FIVE / SIX / SEVEN
  - RedirectForReturnDis: Auto / 0 / 1
  - Core Performance Boost: Auto / Disabled
  - lobal C-state Control: Auto / Disabled / Enabled
  - Opcache Control: Auto / Disabled / Enabled
  - SEV ASID Count: Auto / 253 ASIDs / 509 ASIDs
  - SEV-ES ASID Space Limit Control: Auto / manual (opens another option)
    - SEV-ES ASID Space Limit: [manual]
  - Streaming Stores Control: Auto / Disabled / Enabled
  - Local APIC Mode: Auto / xAPIC / x2APIC
  - ACPI _CST C1 Declaration: Auto / Disabled / Enabled
  - MCA error thresh enable: True / False
  - MCA error thresh count: FF5 (default) [manual]
  - SMU and PSP Debug Mode: Auto / Disabled / Enabled
  - PPIN Opt-in: Auto / Disabled / Enabled
  - Action on BIST Failure: Auto / Down-Core / Do nothing
  - IBS hardware workaround: Auto / Down-Core / Do nothing
- DF Common Options:
  - Scrubber:
    - DRAM scrub time(hours): Auto / Disabled / 1h / 4h / 8h / 16h / 24h / 48h
    - Poison scrubber control: Auto / Disabled / Enabled
    - Redirect scrubber control: Auto / Disabled / Enabled
    - Redirect scrubber limit: Auto / Infinite / 2 / 4 / 8
    - DRAM map inversion: Auto / Disabled / Enabled
  - Memory Addressing:
    - Memory interleaving size: Auto / 256 Bytes / 512 Bytes / 1 KB / 2 KB
  - CC6 memory region encryption: Auto / Disabled / Enabled
  - Memory Clear: Auto / Disabled / Enabled
  - Disable DF to external downstream IP SyncFloodPropagation: Auto / Sync flood enabled / Sync flood disabled
  - Disable DF sync flood propagation: Auto / Sync flood enabled / Sync flood disabled
  - Freeze DF module queues on error: Auto / Disabled / Enabled
  - DF Cstates: Auto / Disabled / Enabled
- UMC Common Options:
- NBIO Common Options:
- FCH Common Options:
- SMU Common Options:
  - System Configuration (TDP): Auto / 10W / 15W / 25W / 35W / 45W / 54W
  - Sustained Power Limit: [manual]
  - PPT Control: Auto / Manual (opens manual value input option)
  - STAPM Control: Auto / Manual (opens manual value input option)
  - Thermal Control: Auto / Manual (opens manual value input option)
  - TDC Control: Auto / Manual (opens manual value input option)
  - EDC Control: Auto / Manual (opens manual value input option)
  - PSI3 Control: Auto / Manual (opens manual value input option)
  - PROCHOT Control: Auto / Manual (opens manual value input option)
  - STT Control: Auto / Manual (opens manual value input option)
  - Fan Control: Auto / Manual (opens manual value input option)
  - VDDP Voltage Control: Auto / Manual (opens manual value input option)
  - VDDM Voltage Control: Auto / Manual (opens manual value input option)
  - SmartShift Control:
    - SmartShift Control: Auto / Manual(opens more options)
      - SmartShift Enable: Auto / Disabled / Enabled
      - APU Only sPPT Limit: [manual]
      - Sustained PowerLimit: [manual]
      - Fast PPT Limit: [manual]
      - Slow PPT Limit: [manual]
  - Zstates (Z9 and Z10): Auto / Disabled / Enabled
- SOC Miscellaneous Control:
  - PSP RPMC Switch: Auto / Disabled / Enabled
  - Firmware Anti-rollback (FAR):
    - Initial SPL value for FAR: [manual]
    - FAR Switch: Disabled / Enabled
  - Rom Armor support: Auto / Disabled / Enabled
  - ABL Console Out Control: Auto / Disabled / Enabled
  - Secured-core Auto enablement: Auto / Disabled / Enabled
  - Pluton (HSP) Options:
    - Pluton (HSP) X86 Firmware Support: Auto / Disabled / Enabled
    - Pluton (HSP) UART: Auto / Disabled / Enabled
    - Pluton (HSP) FIPS: Auto / Disabled / Enabled
    - Pluton (HSP) ACPI Fence Enable: Auto / True / False
  - AIM-T Options:
    - AGESA MPM support:
      - KVM for Wired Manageability: Auto / Disabled / Enabled
      - Wireless Manageability: Auto / Disabled / Enabled (opens more options)
        KVM for Wireless Manageability: Auto / Disabled / Enabled
        TCR for Wireless Manageability: Auto / Disabled / Enabled
  - Intrusion Detection:
    - Intrusion Detection settings: [manual] requires password to show settings
  - Mixed DIMM config extended NUMA domain: Auto / Disabled / Enabled
Displays 4 Intel NICs if they are present and flashed:
- when chosen displays brief NIC info, link status and MAC address.
Driver Health: displays Intel NICs driver status: Healthy / Not Healty.

Developer Center > Bedrock V3000 BIOS Settings > image-20230509-171652.png

Chipset screen:
- South Bridge:
  - SB USB configuration, enable disable different USB port options.
- GFX Configuration:
  - NOT SUPPORTED
- North Bridge:
  - DDR Memmory data.

Developer Center > Bedrock V3000 BIOS Settings > image-20230509-171506.png

Security screen:
- change Administrator Password.
- change User Password.
- HDD Security Configuration: Displays NVME / HDD security info
- secure boot options:
  - enable/disable secure boot.
  - secure boot mode.

Developer Center > Bedrock V3000 BIOS Settings > image-20230509-171435.png

Boot screen:
- In Boot Configuration you can:
  - choose the bios wait time before it continues booting.
  - choose NumLock state on boot process enabled/disabled.
  - choose quiet boot options.
- In Boot Option Priorities you can:
  - choose boot order
  - enable/disable fast boot
  - choose SATA properties
  - enable/disable NVME support
  - enable/disable VGA support
  - choose USB support properties
  - nable/disabl PS2 devices support
  - enable/disable Network stack support
  - enable/disable USB Mass Storage support

Developer Center > Bedrock V3000 BIOS Settings > image-20230509-171043.png

Save & Exit screen:
- In Save options you can:
  - save, discard changes made in the BIOS configuration.
  - reset the device and exit BIOS and continue the boot process.
- In Default Options you can:
  - save user configurations.
  - restore default configuration.
- In Boot Override you can:
  - choose boot device, disregarding the chosen boot order.