Date | Owner | Revision | Notes |
No warranty of accuracy is given concerning the contents of the information contained in this publication. To the extent permitted by law no liability (including liability to any person by reason of negligence) will be accepted by SolidRun Ltd., its subsidiaries or employees for any direct or indirect loss or damage caused by omissions from or inaccuracies in this document. SolidRun Ltd. reserves the right to change details in this publication without prior notice. Product and company names herein may be the trademarks of their respective owners. |
Short Description | Errata | Affected PCB rev | Fix or workaround |
upper 10Gbps SFP+ Port can not link up | It appears that the upper 10Gbps SFP+ port transmits a signal, but does not receive. Consequently the interface never detects a link. This could be either SW or HW issue, to be determined. | 1.0 | None. Do not use this SFP port for now. |
2x 2.5Gbps RJ45 not supported | 2 of the 8 RJ45 ports can from the hardware support 2.5Gbps ethernet. Software support for this configuration is incomplete. | Any | Limit to 1Gbps. |