1. Enable device can0 (for ex):
ip link set can0 up type can bitrate xxxxxx |
(ex: 125000)
2. Bring the CAN interface up:
ifconfig can0 up |
To discover your CAN bus interface name, please run ‘ ip link show ’.
To discover your CAN bus interface name, please run ‘ ip link show ’.
3. To print all data received by CAN interface to “can_test” file (for ex):
candump can0 >> /tmp/can_test & |
4. Send data on the CAN bus:
cansend can0 "123#1234" |
5. Check received data by opening “can_test” file:
cat /tmp/can_test |
If the file includes ‘BB BB BB BB’, then transition has succeeded. ######################################??