| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Please follow BIOS update procedure carefully. Incorrect BIOS update might lead to BIOS corruption that cannot be recovered and would require an RMA. |
| Info |
|---|
Before updating BIOS, you are advised to check current BIOS version |
Table fo contents:
| Table of Contents | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Current BIOS version
| Tip |
|---|
Recommended version |
BIOS V1.
...
04 Release for Bedrock R8000 | R7000
BIOS for Ryzen HS CPUs | BIOS for Ryzen U CPUs |
|---|---|
File name: |
_V1_ |
04_FOR_HS_CPUS.rom.gz Release date: |
05- |
JUN-2025 MD5: |
adb7b3c78b708c91d869ca4d450d3188
|
|
To be used with:
| File name: |
V1_ |
04.rom.gz Release date: |
05- |
JUN-2025 MD5: |
bd1a5669db871185c92d071008c5bfa3
|
|
To be used with:
|
Revision notes
Fixed AMD I2C Driver issue where Busses were powering off and not visible in Linux
Added Smbios Type 1 UUID display from eeprom
Added Smbios Type 8 & Smbios Type 9 tables
Added automatic detection and switching of NIO Display type (USB-C thunderbolt / DP)Fixed Power Tab not showing
Fixed System Management Unit (SMU) in power tab not opening the SMU menu
Added Automatic switching between Full size DisplayPort & USB-C Thunderbolt.
Added option to change SMBIOS tables 1, 2 & 3 from on boardEEprom.
Added SMBIOS tables 8 & 9
...
Older BIOS versions
BIOS V1.01 Release for Bedrock R8000 | R7000
BIOS for Ryzen HS CPUs | BIOS for Ryzen U CPUs | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
File name: Release date: 17-FEB-2025 MD5: db76f6434ed6fae258ef8b12beb01521
To be used with:
| File name: Release date: 17-FEB-2025 MD5: 9d03ef7a73220ee1ec38e8ff4c815c7c
To be used with:
|
Revision notes
Updated to new AGESA 1.2.0.0a
Fixed 10G USB hot-plug issue under Linux
Introduced support for USB-C Thunderbolt on NIO 4x25 (Can be changed in BIOS menu)
Fixed non-functional Full-size DisplayPort on NIO Basic (Can be changed in BIOS menu)
Disabled DRTM support which was breaking some Windows installations
Default memory speed set as follows:
BIOS for Ryzen U: 4800MT/s (Can be changed in BIOS menu)
BIOS for Ryzen HS: 5600MT/s (Can be changed in BIOS menu)
Added visual feedback on BIOS settings reset saved in SPI flash BIOS reset instructions
Fixed splash screen not showing up
...