...
The following quick start guide provides background information about the Honeycomb Ryzen V3000 products which use the Ryzen V3000 System on module.
...
Date | Owner | Revision | Notes | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.0 |
| |||||||||||||||||||||||||||
Table of Contents |
| ||||||||||||||||||||||||||||
Hardware Setup
Product Specifications
| Honeycomb Ryzen V3000 |
|---|---|
I/Os | 3 x USB 2.0 4 3 x USB 3.0 |
Networking | 2 x SFP+ ports (10GbE each) |
Processor | AMD Ryzen Embedded V3C18I |
Memory & Storage | Up to 64GB DDR5 4800 MTPs |
Misc. | BMC functionality |
Development and Debug interfaces | mini USB |
Power12V DC Jack | ATX standard**** NEEDS changes **** |
Expansion card I/Os | PCIe x4 Gen 4.0 |
Temperature | Industrial: -45°C to 85°C |
Dimensions | PCBA: 170 x 137mm **** NEEDS changes ****170mm |
Block Diagram
...
The following figure describes the ClearFog LX2162A Block Diagram.
...
Coming soon…
Visual features overview
...
Please see below the features overview of the connector side of the ClearFog LX2162A
...
HoneyComb AMD V3000 mini ITX
...
Software Setup
Cable setup and prerequisites
...
Linux or Windows PC
HoneyComb Ryzen AMD V3000 mini ITX
Power adapter 5A@12V or ATX 60W+ **** NEEDS changes ****
Mini-USB to USB for console, the HoneyComb Ryzen V3000 has an onboard FTDI chip.
IP router or IP switch
Recommended Cables
The following is a list of industry-standard cables, sorted by type, with the necessary compliance requirements that have been proven to work well with the ClearFog product family.
These examples are the cables which SolidRun uses for testing, and should provide enough information to source products from your preferred cable vendor.
...
Ethernet cable: Monoprice 24AWG Cat6A 500MHz STP
...
USB Cable: SuperSpeed USB 3.0 Type A Male to Female Extension Cable in Black
...
Please refer to the tested SFP modules page
Booting the machine
Downloading Download & installing install images:
You can use the Ubuntu server installation instructions
...
page or download Pre-installed images.
If using the Pre-installed image, flash it to an a USB stick using the following commands:
...
NOTE: check the /dev/sdx device you need using the lsblk command
Booting to OS
...
Insert the USB stick to the device and power it on.
...
For some SFP modules that work on SolidRun networking hardware platforms, please refer to SFP Modules .
Build From Source
You can build your own image using the script in here – GitHub - SolidRun/lx2160a_build **** NEEDS changes ****
...
SO-DIMM Modules
For some SO-DIMM modules that work on SolidRun hardware platforms, please refer to List of tested SO-DIMMs .
OS list
* HoneyComb AMD V3000 by default is headless and will require additional hardware to install Windows using a display adapter.
** As of JUL 7 2024 (FreeBSD 14.01) the AMD XGBE driver on FreeBSD does not fully support SFP later version will eventually have the driver fixed.
Build From Source
Buildroot image is to be added
Documentation
| File | Modified | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Schematics and Board Layout Rev 1.1 | December 2022 | Mechanical files Rev 1.1 | December 2022 |
| 19-JUN-2024 | ||||||
Mechanical files | To be added |
Related Articles
Related pages
LX2160A COM Hardware User ManualLX2162A COM Hardware User ManualDeveloper CenterOften read together
...
| Filter by label | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| Attachments | ||||||
|---|---|---|---|---|---|---|
|