Versions Compared

Version Old Version 1 New Version 2
Changes made by

Rabeeh Khoury

Lior Jigalo

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Introduction

The following quick start guide provides background information about the Honeycomb Ryzen V3000 products which use the Ryzen V3000 System on module.

The guide will give a technical overview about the product and by the end of it you should be able to boot an operating system and begin testing your application.

Revision and Notes

Date

Owner

Revision

Notes

 

1.0

 

Table of Contents

Table of Contents
minLevel1
maxLevel6
include
outlinefalse
indent
styledefault
exclude
typelist
class
printabletrue

 

Hardware Setup

Product Specifications

 

Honeycomb Ryzen V3000

I/Os

3 x USB 2.0

4 x USB 3.0

Networking

2 x SFP+ ports (10GbE each)
1 x 1GbE copper (RJ45)

Processor

AMD Ryzen Embedded V3C18I
8c/16t up to 3.8 GHz

Memory & Storage

Up to 64GB DDR5 4800 MTPs
2x SATA interfaces
M.2 NVME GEN 4.0

Misc.

BMC functionality

Development and Debug interfaces

mini USB

Power

12V DC Jack
ATX standard

**** NEEDS changes ****

Expansion card I/Os

PCIe x4 Gen 4.0

Temperature

Industrial: -45°C to 85°C

Dimensions

PCBA: 170 x 137mm **** NEEDS changes ****

  

Block Diagram**** NEEDS changes ****

The following figure describes the ClearFog LX2162A Block Diagram.

...

Visual features overview

  • **** NEEDS changes ****

Please see below the features overview of the connector side of the ClearFog LX2162A

...

Software Setup

Cable setup and prerequisites

Here is what you will need to power up the board:

  • Linux or Windows PC

  • HoneyComb Ryzen V3000

  • Power adapter 5A@12V or ATX 60W+ **** NEEDS changes ****

  • Mini-USB to USB for console, the HoneyComb Ryzen V3000 has an onboard FTDI chip.

  • IP router or IP switch

Recommended Cables

The following is a list of industry-standard cables, sorted by type, with the necessary compliance requirements that have been proven to work well with the ClearFog product family.

These examples are the cables which SolidRun uses for testing, and should provide enough information to source products from your preferred cable vendor.

  • Ethernet cable: Monoprice 24AWG Cat6A 500MHz STP

  • USB Cable: SuperSpeed USB 3.0 Type A Male to Female Extension Cable in Black

  • SFP connector: GigaLite GE-GB-P1RT-E SFP module with Monoprice 24AWG Cat6A 500MHz STP cable

Booting the machine

Downloading & installing images:

If using the Pre-installed image, flash it to an USB stick using the following commands:

Code Block
gunzip <image_name.img.gz>
dd if=<image_name.img> of=/dev/sdx bs=1M status=progress; sync

NOTE: check the /dev/sdx device you need using the lsblk command

Booting to OS:

Insert the USB stick to the device and power it on.

Wait for the device to boot.

Info

Very first boot might take a while due to DDR training

SFP Modules

For some SFP modules that work on SolidRun networking hardware platforms, please refer to SFP Modules .

Build From Source

Tip

  • Download a pre-built snapshot image based on Ubuntu 20.04 from here SolidRun Images

Documentation

 

File

Modified

Schematics and Board Layout Rev 1.1

Rev 1.1 files here

December 2022

Mechanical files Rev 1.1

Rev 1.1 files here

December 2022

Related pages

LX2160A COM Hardware User ManualLX2162A COM Hardware User ManualDeveloper CenterOften read together

LX2162A SoftwareLX2160A SoftwareDeveloper Center

Attachments
uploadfalse
patterns.*pdf,.*zip
sortBycreateddate