Versions Compared

Version Old Version 27 New Version 28
Changes made by

Irad Stavi

Lior Jigalo

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents

...

Expand
titleoptions

  • BIOS Information

  • System Language

  • System Date

  • System Time

Power screen

  • will be added soon

Advanced screen

...

Expand
titleTrusted Computing

  • Enable/disable TPM

  • Enable/disable PCR Banks

  • Clear TPM pending operation

  • Enable/disable Platform Hierarchy

  • Enable/disable Storage Hierarchy

  • Enable/disable Endorsement Hierarchy

  • Device Select (TPM version)

  • Enable/disable Disable Block Sid

...

Expand
titleOption ROM Dispatch Policy
Note

WARNING:
Changing Device(s) Option ROM dispatch policy may affect system’s ability to post and/or boot!

  • Restore if Failure: Disabled / Enabled (ifenaabled and system fails to boot it will restore this and CSM screens settings to default)

  • Primary Video Ignore: Disabled / Enabled

  • On Board Network Controller: Disabled / Enabled

  • Slot #32 Mass Storage Controller: Disabled / Enabled

  • Slot #33 Mass Storage Controller: Disabled / Enabled

  • Slot #34 Network Controller: Disabled / Enabled

  • Slot #49 Network Controller: Disabled / Enabled

  • Slot #51 Network Controller: Disabled / Enabled

Expand
titlePCI Subsystem Settings
Note

WARNING:
Changing PCIE Device(s) settings may have unwanted side effects! System may HANG!

  • Above 4G Decoding: Disabled / Enabled

  • Re-Size BAR Support: Disabled / Enabled

  • SR-IOV Support: Disabled / Enabled

  • BME DMA Mitigation: Disabled / Enabled

  • Hot-Plug Support: Disabled / Enabled

Expand
titleUSB Configuration

  • Legacy USB Support: Disabled / Enabled

  • XHCI Hand-off: Disabled / Enabled

  • USB Mass Storage Driver Support: Disabled / Enabled

  • USB transfer time-out: 1 sec / 5 sec / 10 sec / 20 sec

  • Device reset time-out: 10 sec / 20 sec / 30 sec / 40 sec

  • Device power-up delay: Auto / Manual (opens another option)

    • Device power-up delay in seconds: [your custom delay]

  • List of USB mass storage devices with option to choose their type:
    Auto / Floppy / Forced FDD / Hard Disk / CD-ROM

...

Expand
titleAMD CBS

  • CPU Common Options:

    • Prefetcher settings:

      • L1 Stream HW Prefetcher: Auto / Disabled / Enabled

      • 2 Stream HW Prefetcher: Auto / Disabled / Enabled

    • Core Watchdog:

    • Core Watchdog Timer Enable: Disabled / Enabled (opens more options)

      • Core Watchdog Timer Interval: Auto / 21.461s - 39us

      • Core Watchdog Timer Severity:
        Auto
        Fatal
        Uncorrected
        Deferred
        Corrected
        Transparent
        No Error

    • CCD/Core/Thread Enablement:

      • Core control: Auto / ONE / TWO / THREE / FOUR / FIVE / SIX / SEVEN

    • RedirectForReturnDis: Auto / 0 / 1

    • Core Performance Boost: Auto / Disabled

    • lobal Global C-state Control: Auto / Disabled / Enabled

    • Opcache Control: Auto / Disabled / Enabled

    • SEV ASID Count: Auto / 253 ASIDs / 509 ASIDs

    • SEV-ES ASID Space Limit Control: Auto / manual (opens another option)

      • SEV-ES ASID Space Limit: [manual]

    • Streaming Stores Control: Auto / Disabled / Enabled

    • Local APIC Mode: Auto / xAPIC / x2APIC

    • ACPI _CST C1 Declaration: Auto / Disabled / Enabled

    • MCA error thresh enable: True / False

    • MCA error thresh count: FF5 (default) [manual]

    • SMU and PSP Debug Mode: Auto / Disabled / Enabled

    • PPIN Opt-in: Auto / Disabled / Enabled

    • Action on BIST Failure: Auto / Down-Core / Do nothing

    • IBS hardware workaround: Auto / Down-Core / Do nothing

  • DF Common Options:

    • Scrubber:

      • DRAM scrub time(hours): Auto / Disabled / 1h / 4h / 8h / 16h / 24h / 48h

      • Poison scrubber control: Auto / Disabled / Enabled

      • Redirect scrubber control: Auto / Disabled / Enabled

      • Redirect scrubber limit: Auto / Infinite / 2 / 4 / 8

      • DRAM map inversion: Auto / Disabled / Enabled

    • Memory Addressing:

      • Memory interleaving size: Auto / 256 Bytes / 512 Bytes / 1 KB / 2 KB

    • CC6 memory region encryption: Auto / Disabled / Enabled

    • Memory Clear: Auto / Disabled / Enabled

    • Disable DF to external downstream IP SyncFloodPropagation: Auto / Sync flood enabled / Sync flood disabled

    • Disable DF sync flood propagation: Auto / Sync flood enabled / Sync flood disabled

    • Freeze DF module queues on error: Auto / Disabled / Enabled

    • DF Cstates: Auto / Disabled / Enabled

  • UMC Common Options:

    • DDR Options:

      • DDR RAS:

        • Disable Memory Error Injection: Auto / False / True

        • Data Poisoning: Auto / Disabled / Enabled

        • DR ECC Configuration:

          • ECC: Auto / Disabled / Enabled

      • DDR Security:

        • TSME: Auto / Disabled / Enabled

        • Data Scramble: Auto / Disabled / Enabled

      • DDR Addressing Options:

        • Chipselect Interleaving: Auto / Disabled

        • Address Hash Bank: Auto / Disabled / Enabled

        • Address Hash CS: Auto / Disabled / Enabled

        • BankSwapMode: Auto / Disabled / Swap APU

      • DDR Training Options:

        • DFE Read Training: Auto / Disabled / Enabled

        • DRAM PDA Enumerate ID Programming Mode: Auto / Toggling PDA enumeration mode / Legacy PDA enumeration mode

      • DDR Memory MBIST:

        • MBIST Enable: Auto / Disabled / Enable (opens more options)

          • MBIST Test Mode: Auto / Both / Data Eye Mode / Interface Mode

          • MBIST Aggressors: Auto / Disabled / Enabled

          • MBIST Per Bit Slave Die Reporting: Auto / Disabled / Enabled

          • DDR Data Eye:

            • Pattern Select: PRBS / SSO / Both

            • Pattern Length: [manual] (default 6)

            • Aggressor Channel: Disabled / 1 Aggressor Channel / 3 Aggressor Channels /
              7 Aggressor Channel

  • NBIO Common Options:

    • IOMMU: Auto / Disabled / Enabled

    • PCIE ARI Support: Auto / Disabled / Enabled

    • Enable AER Cap: Auto / Disabled / Enabled

    • ACS Enable: Auto / Disabled / Enabled

    • PSPP Policy: Auto / Disabled / Enabled

    • GFX Configuration:

      • iGPU Configuration: Auto / iGPU Disabled / UMA_SPECIFIED / UMA_AUTO / UMA_GAME_OPTIMIZED

      • UMA Version: Auto / Non-Legacy / Legacy

      • GPU Host Translation Cache: Auto / Disabled / Enabled

    • Audio Configuration:

      • NB Azalia: Auto / Disabled / Enabled

      • Audio IOs:
        options:
        Auto
        HDA(3SDI) + PDM(2CH)
        HDA(1SDI) + PDM(6CH)
        DA(1SDI) + SDW0(1MDATA) + PDM(2CH)
        SDW0(4MDATA) + PDM(6CH)
        SDW0(4MDATA) + SDW1(1MDATA) + PDM(2CH)
        3I2S PORTS + 1 REFCLK + 1 INTR
        HDA(3SDI) + PDM(6CH) +I2S
        HDA(3SDI) + PDM(8CH)
        HDA(1SDI) + SDW0(1MDATA) + PDM(6CH) + I2S
        SDW0(4MDATA)+ SDW1(1MDATA) + PDM(6CH) + I2S
        SDW0(4MDATA) + SDW1(1MDATA)+ PDM(8CH)

  • FCH Common Options:

    • I3C/I2C Configuration Options:

      • I3C/I2C 0 Enable: Auto / I2C Enabled / I3C Enabled / Both Disabled

      • I3C/I2C 1 Enable: Auto / I2C Enabled / I3C Enabled / Both Disabled

      • I3C/I2C 2 Enable: Auto / I2C Enabled / I3C Enabled / Both Disabled

      • I3C/I2C 3 Enable: Auto / I2C Enabled / I3C Enabled / Both Disabled

    • SATA Configuration Options:

      • SATA Controller: Auto / Disabled / Enabled

      • SATA Auto Shutdown: Auto / Disabled / Enabled

      • Sata RAS Support: Auto / Disabled / Enabled

      • Sata Disabled AHCI Prefetch Function: Auto / Disabled / Enabled

      • Aggresive SATA Device Sleep Port 0: Auto / Disabled / Enabled

      • Aggresive SATA Device Sleep Port 1: Auto / Disabled / Enabled

    • USB Configuration Options:

      • USB0 controller enable: Auto / Disabled / Enabled

      • USB1 controller enable: Auto / Disabled / Enabled

      • USB2 controller enable: Auto / Disabled / Enabled

      • USB0 2.0 port enable:

        • USB0 2.0 Port 0: Auto / Disabled / Enabled

        • USB0 2.0 Port 1: Auto / Disabled / Enabled

        • USB0 2.0 Port 2: Auto / Disabled / Enabled

        • USB0 2.0 Port 3: Auto / Disabled / Enabled

      • USB1 2.0 port enable:

        • USB1 2.0 Port 0: Auto / Disabled / Enabled

        • USB1 2.0 Port 1: Auto / Disabled / Enabled

        • USB1 2.0 Port 2: Auto / Disabled / Enabled

      • USB2 2.0 port enable: Auto / Disabled / Enabled

      • USB3 2.0 port enable: Auto / Disabled / Enabled

      • USB4 2.0 port enable: Auto / Disabled / Enabled

      • USB0 3.1 port enable:

        • USB0 3.1 Port 0: Auto / Disabled / Enabled

        • USB0 3.1 Port 1: Auto / Disabled / Enabled

      • USB1 3.1 port enable: Auto / Disabled / Enabled

        • USB1 3.1 Port 0: Auto / Disabled / Enabled

        • USB1 3.1 Port 1: Auto / Disabled / Enabled

      • USB3 3.1 port enable: Auto / Disabled / Enabled

      • USB4 3.1 port enable: Auto / Disabled / Enabled

    • Ac Power Loss Options:

      • Ac Loss Control: Always On(recommended) / Always Off / Reserved / Previous / Auto

    • Uart UART Configuration Options:

      • Uart UART 0 Enable: Auto / Disabled / Enabled

      • Uart UART 1 Enable (no HW FC): Auto / Disabled / Enabled

      • Uart UART 2 Enable: Auto / Disabled / Enabled

      • Uart UART 3 Enable (no HW FC): Auto / Disabled / Enabled

      • Uart UART 4 Enable: Auto / Disabled / Enabled

    • ESPI Configuration Options: Auto / Disabled / Enabled

    • XGBE Configuration Options:

    • XGBE0 enable: Auto / Disabled / Enabled

    • XGBE1 enable: Auto / Disabled / Enabled

    • USB4 Configuration Options:

      • USB4 pre-CM Enable: Auto / Disabled / Enabled

      • USB4 RT0:

        • RT0 Router Enable: Auto / Disabled / Enabled (opens another option)

        • RT0 PCIE Tunnel: Auto / Disabled / Enabled

      • USB4 RT1:

        • RT1 Router Enable: Auto / Disabled / Enabled (opens another option)

        • RT1 PCIE Tunnel: Auto / Disabled / Enabled

    • SPI Configuration Options:

      • HFP Enable: Auto / Disabled / Enabled

      • HID Enable: Auto / Disabled / Enabled

      • HID2 Enable: Auto / Disabled / Enabled

  • SMU Common Options:

    • System Configuration (TDP): Auto / 10W / 15W / 25W / 35W / 45W / 54W

    • Sustained Power Limit: [manual]

    • PPT Control: Auto / Manual (opens manual value input option)

    • STAPM Control: Auto / Manual (opens manual value input option)

    • Thermal Control: Auto / Manual (opens manual value input option)

    • TDC Control: Auto / Manual (opens manual value input option)

    • EDC Control: Auto / Manual (opens manual value input option)

    • PSI3 Control: Auto / Manual (opens manual value input option)

    • PROCHOT Control: Auto / Manual (opens manual value input option)

    • STT Control: Auto / Manual (opens manual value input option)

    • Fan Control: Auto / Manual (opens manual value input option)

    • VDDP Voltage Control: Auto / Manual (opens manual value input option)

    • VDDM Voltage Control: Auto / Manual (opens manual value input option)

    • SmartShift Control:

      • SmartShift Control: Auto / Manual(opens more options)

        • SmartShift Enable: Auto / Disabled / Enabled

        • APU Only sPPT Limit: [manual]

        • Sustained PowerLimit: [manual]

        • Fast PPT Limit: [manual]

        • Slow PPT Limit: [manual]

    • Zstates (Z9 and Z10): Auto / Disabled / Enabled

  • SOC Miscellaneous Control:

    • PSP RPMC Switch: Auto / Disabled / Enabled

    • Firmware Anti-rollback (FAR):

      • Initial SPL value for FAR: [manual]

      • FAR Switch: Disabled / Enabled

    • Rom ROM Armor support: Auto / Disabled / Enabled

    • ABL Console Out Control: Auto / Disabled / Enabled

    • Secured-core Auto enablement: Auto / Disabled / Enabled

    • Pluton (HSP) Options:

      • Pluton (HSP) X86 Firmware Support: Auto / Disabled / Enabled

      • Pluton (HSP) UART: Auto / Disabled / Enabled

      • Pluton (HSP) FIPS: Auto / Disabled / Enabled

      • Pluton (HSP) ACPI Fence Enable: Auto / True / False

    • AIM-T Options:

      • AGESA MPM support:

        • KVM for Wired Manageability: Auto / Disabled / Enabled

        • Wireless Manageability: Auto / Disabled / Enabled (opens more options)

          • KVM for Wireless Manageability: Auto / Disabled / Enabled

          • TCR for Wireless Manageability: Auto / Disabled / Enabled

    • Intrusion Detection:

      • Intrusion Detection settings: [manual] requires password to show settings

    • Mixed DIMM config extended NUMA domain: Auto / Disabled / Enabled

...