...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

...

Main screen

...

...

Expand
title options
BIOS Information System Language System Date System Time

Image Removed

Advanced screen

...

...

Expand
title Trusted Computing
Enable/disable TPM Enable/disable PCR Banks Clear TPM pending operation Enable/disable Platform Hierarchy Enable/disable Storage Hierarchy Enable/disable Endorsement Hierarchy Device Select (TPM version) Enable/disable Disable Block Sid

...

Expand
title Debug Port Table Configuration
Debug Port Table: Disabled / Enabled Debug Port Table 2: Disabled / Enabled

Expand
title Option ROM Dispatch Policy
Expand
title Option ROM Dispatch Policy
Note WARNING: Changing Device(s) Option ROM dispatch policy may affect system’s ability to post and/or boot!

...

Restore if Failure: Disabled / Enabled (ifenaabled and system fails to boot it will restore this and CSM screens settings to default) Primary Video Ignore: Disabled / Enabled On Board Network Controller: Disabled / Enabled Slot #32 Mass Storage Controller: Disabled / Enabled Slot #33 Mass Storage Controller: Disabled / Enabled Slot #34 Network Controller: Disabled / Enabled Slot #49 Network Controller: Disabled / Enabled Slot #51 Network Controller: Disabled / Enabled

Expand
title PCI Subsystem Settings
Note WARNING: Changing PCIE Device(s) settings may have unwanted side effects! System may HANG!

...

expand

title PCI Subsystem Settings

Above 4G Decoding: Disabled / Enabled Re-Size BAR Support: Disabled / Enabled SR-IOV Support: Disabled / Enabled BME DMA Mitigation: Disabled / Enabled Hot-Plug Support: Disabled / Enabled

Expand
title USB Configuration
Legacy USB Support: Disabled / Enabled XHCI Hand-off: Disabled / Enabled USB Mass Storage Driver Support: Disabled / Enabled USB transfer time-out: 1 sec / 5 sec / 10 sec / 20 sec Device reset time-out: 10 sec / 20 sec / 30 sec / 40 sec Device power-up delay: Auto / Manual (opens another option) Device power-up delay in seconds: [your custom delay] List of USB mass storage devices with option to choose their type: Auto / Floppy / Forced FDD / Hard Disk / CD-ROM

...

• Displays 4 Intel NICs if they are present and flashed:

  • when chosen displays brief NIC info, link status and MAC address.

• Driver Health: displays Intel NICs driver status: Healthy / Not Healty.

...

Chipset screen

...

...

Expand
title submenus
South Bridge: SB USB configuration, enable disable different USB port options. GFX Configuration: NOT SUPPORTED North Bridge: DDR Memory data.

Image Removed

Security screen

...

...

Expand
title submenus
change Administrator Password. change User Password. HDD Security Configuration: Displays NVME / HDD security info secure boot options: enable/disable secure boot. secure boot mode.

...

Boot screen

...

...

Expand
title options
In Boot Configuration you can: choose the BIOS wait time before it continues booting. choose NumLock state on boot process enabled/disabled. choose quiet boot options. In Boot Option Priorities you can: choose boot order enable/disable fast boot choose SATA properties enable/disable NVME support enable/disable VGA support choose USB support properties nable/disabl PS2 devices support enable/disable Network stack support enable/disable USB Mass Storage support

Image Removed

Save & Exit screen

...

...

Expand
title submenus
In Save options you can: save, discard changes made in the BIOS configuration. reset the device and exit BIOS and continue the boot process. In Default Options you can: save user configurations. restore default configuration. In Boot Override you can: choose boot device, disregarding the chosen boot order.

...