Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titleDebug Port Table Configuration
  • Debug Port Table: Disabled / Enabled

  • Debug Port Table 2: Disabled / Enabled

  • WARNING:
    Changing Device(s) Option ROM dispatch policy may affect system’s ability to post and/or boot!
    PROCEED WITH CAUTION!

Expand
titleOption ROM Dispatch Policy
  • Restore if Failure: Disabled / Enabled (ifenaabled and system fails to boot it will restore this and CSM screens settings to default)

  • Primary Video Ignore: Disabled / Enabled

  • On Board Network Controller: Disabled / Enabled

  • Slot #32 Mass Storage Controller: Disabled / Enabled

  • Slot #33 Mass Storage Controller: Disabled / Enabled

  • Slot #34 Network Controller: Disabled / Enabled

  • Slot #49 Network Controller: Disabled / Enabled

  • Slot #51 Network Controller: Disabled / Enabled

  • WARNING:
    Changing PCI Device(s) settings may have unwanted side effects! System may HANG!
    PROCEED WITH CAUTION.

Expand
titlePCI Subsystem Settings
  • Above 4G Decoding: Disabled / Enabled

  • Re-Size BAR Support: Disabled / Enabled

  • SR-IOV Support: Disabled / Enabled

  • BME DMA Mitigation: Disabled / Enabled

  • Hot-Plug Support: Disabled / Enabled

Expand
titleUSB Configuration
  • Legacy USB Support: Disabled / Enabled

  • XHCI Hand-off: Disabled / Enabled

  • USB Mass Storage Driver Support: Disabled / Enabled

  • USB transfer time-out: 1 sec / 5 sec / 10 sec / 20 sec

  • Device reset time-out: 10 sec / 20 sec / 30 sec / 40 sec

  • Device power-up delay: Auto / Manual (opens another option)

    • Device power-up delay in seconds: [your custom delay]

  • list of USB mass storage devices with option to choose their type:
    Auto / Floppy / Forced FDD / Hard Disk / CD-ROM

...

Expand
titlesubmenus
  • South Bridge:

    • SB USB configuration, enable disable different USB port options.

  • GFX Configuration:

    • NOT SUPPORTED

  • North Bridge:

    • DDR Memmory Memory data.

  • Security screen:

Expand
titlesubmenus
  • change Administrator Password.

  • change User Password.

  • HDD Security Configuration: Displays NVME / HDD security info

  • secure boot options:

    • enable/disable secure boot.

    • secure boot mode.

...