Content Comparison

• bios information

• system language

• System Date

• System Time

• enable/disable tpm

• enable/disable PCR Banks

• clear TPM pending operation

• enable/disable Platform Hierarchy

• enable/disable Storage Hierarchy

• enable/disable Endorsement Hierarchy

• Device Select select (tpm version)

• enable/disable Disable Block Sid

• choose tpm device

• erase ftpm

• enable/disable ACPI Auto Configuration

• enable/disable Hibernation: enables to go into S4 sleep state

• ACPI Sleep State: decide what ot do on sleep suspend to RAM / suspend disabled

• enable/disable Lock Legacy Resources

• Wake system from S5: Disabled / Fixed Time / Dynamic Time

• enable/disable Password protection of Runtime Variables

• enable/disable Console Redirection

• Console Redirection Settings:

  • Terminal Type (BIOS visual personalization): VT100 / VT100Plus / VT-UTF8 / ANSI

  • Bits per second: 9600 / 19200 / 38400 / 57600 / 115200

  • Data Bits: 7 / 8

  • Parity: None / Even / Odd / Mark / Space

  • Stop Bits: 1 / 2

  • Flow Control: None / Hardware RTS/CTS

  • VT-UTF8 Combo Key Support: Disabled / Enabled

  • Recorder Mode: Disabled / Enabled

  • Resolution 100x31: Disabled / Enabled

  • Putty KeyPad: VT100 / LINUX / XTERMR6 / SCO / ESCN / VT400

• Console Redirection EMS: Disabled / Enabled (opens configuration options)

  • Terminal Type EMS: VT100 / VT100Plus / VT-UTF8 / ANSI

  • Bits per second EMS: 9600 / 19200 / 57600 / 115200

  • Flow Control EMS: None / 'Hardware RTS/CTS ' / Software Xon/Xoff

• PSS Support: Disabled / Enabled

• PPC Adjustment: PState 0 / PState 1 / PState 2

• NX Mode: Disabled / Enabled

• SVM Mode: Disabled / Enabled

• Node 0 Information (opens new window with memory information related to node 0)

• NONE

• Debug Port Table: Disabled / Enabled

• Debug Port Table 2: Disabled / Enabled

• Restore if Failure: Disabled / Enabled (ifenaabled and system fails to boot it will restore this and CSM screens settings to default)

• Primary Video Ignore: Disabled / Enabled

• On Board Network Controller: Disabled / Enabled

• Slot #32 Mass Storage Controller: Disabled / Enabled

• Slot #33 Mass Storage Controller: Disabled / Enabled

• Slot #34 Network Controller: Disabled / Enabled

• Slot #49 Network Controller: Disabled / Enabled

• Slot #51 Network Controller: Disabled / Enabled

• Above 4G Decoding: Disabled / Enabled

• Re-Size BAR Support: Disabled / Enabled

• SR-IOV Support: Disabled / Enabled

• BME DMA Mitigation: Disabled / Enabled

• Hot-Plug Support: Disabled / Enabled

• Legacy USB Support: Disabled / Enabled

• XHCI Hand-off: Disabled / Enabled

• USB Mass Storage Driver Support: Disabled / Enabled

• USB transfer time-out: 1 sec / 5 sec / 10 sec / 20 sec

• Device reset time-out: 10 sec / 20 sec / 30 sec / 40 sec

• Device power-up delay: Auto / Manual (opens another option)

  • Device power-up delay in seconds: [your custom delay]

• list of USB mass storage devices with option to choose their type:
  Auto / Floppy / Forced FDD / Hard Disk / CD-ROM

• Network Stack: Disabled / Enabled (opens list of options)

  • IPv4 PXE Support: Disabled / Enabled

  • IPv4 HTTP Support: Disabled / Enabled

  • IPv6 PXE Support: Disabled / Enabled

  • IPv6 HTTP Support: Disabled / Enabled

  • PXE boot wait time: [your custom wait time]

  • Media detect count: [your custom retry count]

• lists your NVME drives, and allows you to run tests also shows last test results and drive data:

  • Self Test Option: Short / Extended

  • Self Test Action: Controller Only Test / Controller and NameSpace Test

  • Run Device Self Test

Onboard PCIE LAN PXE ROM: Disabled / Enabled

PCI-E Port:

Pcie Port Control: Disabled / Enabled (opens a menu for each PCI-E device)

Device $ Fun $: Disabled / Enabled / Auto

ASPM Mode(Dev#$/Func#$): Disabled / L0s Entry / L1 Entry / L0s And L1 Entry / Auto

Hotplug Mode(Dev#$/Func#$): Disabled / Hotplug Basic / Hotplug Server / Hotplug Enhanced / Hotplug Inboard / Auto

PCR7 WA Support: Disabled / Enabled / Auto

• SDEV ACPI: Disabled / Enabled

• Disk Memory Type: Boot Service Data / Reserved

• Create raw: Create a new RAM disk with the given starting and ending address.

• Create from file: Create a new RAM disk from a file, opens a menu with all your storage devices to choose.

• Remove selected RAM disk(s)

• add / remove client certificate

• AMD Firmware Version: displays AMDs firmware information

• PCI Express Configurations:

  • Pcie Dxio Timing ControlEnable: Disabled / Enabled

  • PCIe x4 Slot-1: Disabled / Enabled

  • AMD XGBE Path Selection: On Board Ports / Add In Card / Disabled

  • XGBE Port0/1 controller: RJ45 / SFP

  • XGBE Port0/1 Mode Selection: 10G/1G Backplane / 2.5G Backplane / SFP+ connector / Backplane AN OFF

  • XGBE Port0/1 Speed Selection: 1G / 10G / '10G/1G' / 100Mbps / 10Mbps

  • PXE BOOT: PORT 0 / PORT 1

  • PCIE 2x8 slots: Disabled / Enabled

  • M.2/PCIe Slot: M.2 NVMe (x4) / M.2 NVMe (x2) / PCIe Slot-3 (x4)

  • PCIe GPP Slot Hotplug support: Disabled / Enabled

  • PCIe dGPU Slot Hotplug support: Disabled / Enabled

  • NVMe RAID mode: Disabled / Enabled

• Power Saving Configurations:

  • S3/Modern Standby Support: S3 Enable / Modern Standby Enable

  • Wake on PME: determines the action when system power is off and PCI enable wake up event occurs. Disabled / Enabled

  • Internal PCIe GPP 0 D3: Disabled / Enabled

    • SOC GPU D3: Disabled / Enabled

    • SOC HD Audio D3: Disabled / Enabled

    • SOC USB3.1 D3: Disabled / Enabled

    • SOC ACP D3: Disabled / Enabled

    • SOC Azalia D3: Disabled / Enabled

  • Internal PCIe GPP 2 D3: Disabled / Enabled

    • SOC USB2.0 D3: Disabled / Enabled

    • SOC USB3.1 for USB4 D3: Disabled / Enabled

    • SOC USB4 D3: Disabled / Enabled

  • Internal USB4 PCIe Tunneling D3: enable internal USB4 PCIe tunneling D3 abd add into PEP Device dependency list. Disabled / Enabled

    • SOC USB4 PCIe Endpoint D3: Disabled / Enabled

  • Unused GPP Clocks Off: Disabled / Enabled

  • Clock PM: CLK_REQ0: Disabled / Enabled

  • Clock PM: CLK_REQ1: Disabled / Enabled

  • Clock PM: CLK_REQ2: Disabled / Enabled

  • Clock PM: CLK_REQ3: Disabled / Enabled

  • Clock PM: CLK_REQ4: Disabled / Enabled

  • Clock PM: CLK_REQ5: Disabled / Enabled

  • Clock PM: CLK_REQ6: Disabled / Enabled

  • Z-states support on non-Z10 capable PCIe: Disabled / Enabled

• Graphics Configurations:

  • EVAL Slot Power Enable: Disabled / Enabled

  • EVAL CARD T-Diode Routing Select: EC / APU SMBUS0

  • D3Cold Support: Disabled / Enabled

  • NVIDIA DGPU Power Enable: Disabled / Enabled

  • Discrete GPU _DSM Function A: Disabled / Enabled

  • Discrete GPU _DSM Function B: Disabled / Enabled

  • Non-Eval Discrete GPU Support: Disabled / Enabled

  • Discrete GPU HPD Circuitry: OR Circuitry / Pulse Circuitry

  • Discrete GPU's Audio: Disabled / Keep ROM Strap Setting

  • Discrete GPU's USB Port: Keep Default Setting / Disabled

  • Discrete GPU's SSID/SVID: Program by Vendor / Keep Default Setting

    • Discrete GPU's VGA SSID/SVID: [manual]

    • Discrete GPU's AUDIO SSID/SVID: [manual]

  • Discrete GPU BOMACO Support: Disabled / Enabled

    • BLINK LED: Disabled / Enabled

  • ATIF Function 23 Support: Disabled / Enabled

  • Primary Video Adaptor: Ext Graphics (PEG) / Int Graphics (IGD)

• Display Configurations:

  • DP0 Select: Default (DP) / DP display / HDMI display

  • DP1 Select: Default (DP) / DP display / HDMI display

    • Adjust DP Caps: Soc Default / Cap override

  • DP2: Default (DP with TypeC) / EDP display / HDMI display / DP with TypeC display / DP without TypeC display

    • Adjust DP Caps: Soc Default / Cap override

  • DP2 Over USBC2: DP with TypeC display / Default (DP with TypeC) / DP without TypeC display

  • DP3/HDMI1/USB6: USB / Default (DP without TypeC) / DP display / HDMI display

• USB/Thunderbolt Configurations:

  • PD USB4 Control Enable/Disable: Disabled / Enabled

  • USB4 Bus Reserved:

  • USB4 Non-Prefetch Memory Reserved: [manual]

  • USB4 non-Prefetch MMIO align (0 ~ 65534 MB): [manual]

  • USB4 Prefetch Memory Reserved: [manual]

  • USB4 Prefetch MMIO align (0 ~ 65534 MB): [manual]

  • USB Camera Enable: Disabled / Enabled

  • USB Finger Printer Enable: Disabled / Enabled

  • UCSI Support: Disabled / Enabled

  • USBC Port Harware Disable Support: Disabled / Enabled

  • Reconfig Rebalance Resources by OS: Disabled / Enabled

  • PD Thunderbolt3 Alt Mode: Disabled / Enabled

  • USB4 ACPI _DEP Support: Disabled / Enabled

• Audio Configurations:

  • Wake On Voice: Disabled / Enabled

  • ACP Power Gating: Disabled / Enabled

  • ACP CLock Gating: Disabled / Enabled

  • SoundWire SSDT Support: Disabled / Enabled

  • TDM2_DIN Pull High: Disabled / Enabled

• I2C Configurations:

  • MITT/WITT Selection: Both disable / WITT Only / MITT Only

• Thermal Configurations:

  • APU PROCHOT# setting:
    Enable APU_PROCHOT# in pure-DC case /
    Disable APU_PROCHOT# /
    Enable APU_PROCHOT# in pure-AC case /
    Enable APU_PROCHOT# in either pure-DC or pure-AC case (not AC+DC)

  • AMD DPTC interface: Disabled / Enabled

  • STT sensor reporting: Disabled / Enabled

• MP2 Configurations:

  • Power Sensors Routing Select: WALLE lite PDT / WALLE lite PM log

  • Turn off Xtal (S3/S5): Disabled / Enabled

  • Sensor Fusion User Mode Driver: Disabled / Enabled

  • Allocate 100KB For MP2: Disabled / Enabled

  • Wake On Human Presence detection WA: Disabled / Enabled

• Debug Configurations:

  • Serial Debug Message Under OS: Disabled / Enabled

  • Debug Print In ASL: Disabled / Enabled

  • iLA TraceMemoryEn: Disabled / Enabled

  • StallForUnlock: Disabled / Enabled

• AMD PMF Settings:

  • AMD PMF Device Support: Disabled / Enabled (opens a list of options)

  • APMF Function 1 Settings:

    • Time interval for PMF to send heartbeat signal to BIOS (seconds): [manual]

  • APMF Function 3 Settings:

    • AMPF Function 3: Disabled / Enabled (opens a list of options)

      • AC_Best_Performance_Limit: [manual]

      • Fan_ID_AC_Best_Performance_Limit: [manual]

      • AC_Better_Performance_Limit: [manual]

      • Fan_ID_AC_Better_Performance_Limit: [manual]

      • AC_Better_Battery_Limit: [manual]

      • Fan_ID_AC_Better_Battery_Limit: [manual]

      • DC_Best_Performance_Limit: [manual]

      • Fan_ID_DC_Best_Performance_Limit: [manual]

      • DC_Better_Performance_Limit: [manual]

      • Fan_ID_DC_Better_Performance_Limit: [manual]

      • DC_Better_Battery_Limit: [manual]

      • Fan_ID_DC_Better_Battery_Limit: [manual]

      • DC_Battery_Saver_Limit: [manual]

      • Fan_ID_DC_Battery_Saver_Limit: [manual]

  • APMF Function 4 Settings: Disabled / Enabled

  • APMF Function 5 Settings: Disabled / Enabled (opens a list of options)

    • T_Balanced_to_Perf : [manual]

    • T_Perf_to_Balanced: [manual]

    • T_Quiet_to_Balanced: [manual]

    • T_Balanced_to_Quiet: [manual]

    • Pfloor_Perf: [manual]

    • Pfloor_Balanced: [manual]

    • Pfloor_Quiet: [manual]

    • P_delta_Balanced_to_Perf: [manual]

    • P_delta_Perf_to_Balanced: [manual]

    • P_delta_Quiet_to_Balanced: [manual]

    • P_delta_Balanced_to_Quiet: [manual]

    • STT_SkinTempLimit_APU_Perf_on_Lap: [manual]

    • STT_SkinTempLimit_HS2_Perf_on_Lap: [manual]

    • STT_SkinTempLimit_APU_Perf: [manual]

    • STT_SkinTempLimit_HS2_Perf: [manual]

    • STT_SkinTempLimit_APU_Balanced: [manual]

    • STT_SkinTempLimit_HS2_Balanced: [manual]

    • STT_SkinTempLimit_APU_Quiet: [manual]

    • STT_SkinTempLimit_HS2: [manual]

    • STTMinLimit_Perf_on_lap: [manual]

    • STTMinLimit_Perf: [manual]

    • STTMinLimit_Balanced: [manual]

    • STTMinLimit_Quiet: [manual]

    • FPPT_Perf_on_lap: [manual]

    • SPPT_Perf_on_lap: [manual]

    • SPL_Perf_on_lap: [manual]

    • SPPT_APUOnly_Perf_on_Lap: [manual]

    • FPPT_Perf: [manual]

    • SPPT_Perf: [manual]

    • SPL_Perf: [manual]

    • SPPT_APUOnly_Perf: [manual]

    • FPPT_Balanced: [manual]

    • SPPT_Balanced: [manual]

    • SPL_Balanced: [manual]

    • SPPT_APUOnly_Balanced: [manual]

    • FPPT_Quiet: [manual]

    • SPPT_Quiet: [manual]

    • SPL_Quiet: [manual]

    • SPPT_APUOnly_Quiet: [manual]

    • Fan_ID_Perf: [manual]

    • Fan_ID_Balanced: [manual]

    • Fan_ID_Quiet: [manual]

  • APMF Function 6 Settings: Disabled / Enabled (opens a list of options)

    • ConditionTemp_In_Bag_Policy: [manual]

    • ConditionTemp_In_Bag_S4_Policy: [manual]

    • FPPT_In_Bag_Policy: [manual]

    • SPPT_In_Bag_Policy: [manual]

    • SPPT_ApuOnly_In_Bag_Policy: [manual]

    • SPL_In_Bag_Policy: [manual]

    • STTMinLimit_In_Bag_Policy: [manual]

    • STT_SkinTempLimit_APU_In_Bag_Policy: [manual]

    • STT_SkinTempLimit_HS2_In_Bag_Policy: [manual]

    • Fan_ID_In_Bag_Policy: [manual]

    • FPPT_In_Bag_Exit_Policy: [manual]

    • SPPT_In_Bag_Exit_Policy: [manual]

    • SPPT_ApuOnly_In_Bag_Exit_Policy: [manual]

    • SPL_In_Bag_Exit_Policy: [manual]

    • STTMinLimit_In_Bag_Exit_Policy: [manual]

    • STT_SkinTempLimit_APU_In_Bag_Exit_Policy: [manual]

    • STT_SkinTempLimit_HS2_In_Bag_Exit_Policy: [manual]

  • APMF Function 9 Settings: Disabled / Enabled (opens a list of options)

    APMF Function 5 Settings: Disabled / Enabled (opens a list of options)

    • AC_Best_Performance_Limit

      fPPT_BestPerfAC: [manual]

      Fan_ID_AC_Best_Performance_Limit

    • sPPT_BestPerfAC: [manual]

      AC
    • _Better_Performance_Limit

      sPPT_APUOnlyBestPerfAC: [manual]

      Fan_ID_AC_Better_Performance_Limit

    • SPL_BestPerfAC: [manual]

      AC
    • _Better_Battery_Limit

      STTMinLimit_BestPerfAC: [manual]

      Fan

    • STT_

      ID

      SkinTempLimit_

      AC_Better_Battery_Limit

      APU_BestPerfAC: [manual]

    • DC

      STT_

      Best

      SkinTempLimit_

      Performance

      HS2_

      Limit

      BestPerfAC: [manual]

    • Fan_ID_

      DC_Best_Performance_Limit

      BestPerfAC: [manual]

      DC_Better_Performance_Limit

    • fPPT_BetterPerfAC: [manual]

    • sPPT_BetterPerfAC: [manual]

      Fan
    • _ID_DC_Better_Performance_Limit

      sPPT_APUOnlyBetterPerfAC: [manual]

      DC_Better_Battery_Limit

    • SPL_BetterPerfAC: [manual]

      Fan
    • _ID_DC_Better_Battery_Limit

      STTMinLimit_BetterPerfAC: [manual]

      DC

    • STT_

      Battery

      SkinTempLimit_

      Saver

      APU_

      Limit

      BetterPerfAC: [manual]

      Fan

    • STT_

      ID

      SkinTempLimit_

      DC_Battery_Saver_Limit

      HS2_BetterPerfAC: [manual]

  • APMF Function 4 Settings: Disabled / Enabled

  • • T_Balanced_to_Perf

    • Fan_ID_BetterPerfAC: [manual]

    • fPPT_BetterBatteryAC: [manual]T

    • _Perf_to_BalancedsPPT_BetterBatteryAC: [manual]

    • sPPT_APUOnlyBetterBatteryAC: [manual]

    • SPL_BetterBatteryAC: [manual]T

    • _Quiet_to_BalancedSTTMinLimit_BetterBatteryAC: [manual]T_Balanced_to_

    • QuietSPL_BetterBatteryAC: [manual]

    • PfloorSTTMinLimit_PerfBetterBatteryAC: [manual]Pfloor_Balanced

    • STT_SkinTempLimit_APU_BetterBatteryAC: [manual]Pfloor

    • _QuietSTT_SkinTempLimit_HS2_BetterBatteryAC: [manual]P

    • Fan_delta_Balanced_to_PerfID_BetterBatteryAC: [manual]

    • fPPT_BestPerfDC: [manual]P

    • _delta_Perf_to_BalancedsPPT_BestPerfDC: [manual]

    • sPPT_APUOnlyBestPerfDC: [manual]P

    • _delta_Quiet_to_BalancedSPL_BestPerfDC: [manual]P_delta_Balanced_to_Quiet

    • STTMinLimit_BestPerfDC: [manual]

    • STT_SkinTempLimit_APU_Perf_on_LapBestPerfDC: [manual]

    • STT_SkinTempLimit_HS2_Perf_on_LapBestPerfDC: [manual]

    • Fan_ID_BestPerfDC: [manual]STT_

    • SkinTempLimit_APU_PerffPPT_BetterPerfDC: [manual]

    • sPPT_BetterPerfDC: [manual]STT

    • _SkinTempLimit_HS2_PerfsPPT_APUOnlyBetterPerfDC: [manual]STT_SkinTempLimit_APU_

    • BalancedSPL_BetterPerfDC: [manual]

    • STT_SkinTempLimit_HS2_BalancedSTTMinLimit_BetterPerfDC: [manual]

    • STT_SkinTempLimit_APU_QuietBetterPerfDC: [manual]

    • STT_SkinTempLimit_HS2_BetterPerfDC: [manual]STTMinLimit

    • Fan_PerfID_on_lapBetterPerfDC: [manual]

    • STTMinLimitfPPT_PerfBetterBatteryDC: [manual]STTMinLimit

    • sPPT_BalancedBetterBatteryDC: [manual]

    • STTMinLimitsPPT_QuietAPUOnlyBetterBatteryDC: [manual]

    • FPPT_Perf_on_lapSPL_BetterBatteryDC: [manual]SPPT_Perf_on_lap

    • STTMinLimit_BetterBatteryDC: [manual]

    • SPLSTT_PerfSkinTempLimit_onAPU_lapBetterBatteryDC: [manual]SPPT

    • STT_APUOnlySkinTempLimit_PerfHS2_on_LapBetterBatteryDC: [manual]

    • FPPT_Perf: [manual]

    • SPPT_PerfFan_ID_BetterBatteryDC: [manual]

    • SPLfPPT_PerfBatterySaverDC: [manual]SPPT

    • sPPT_APUOnly_PerfBatterySaverDC: [manual]

    • FPPTsPPT_BalancedAPUOnlyBetterBatteryDC: [manual]SPPT

    • SPL_BalancedBatterySaverDC: [manual]SPL

    • STTMinLimit_BalancedBatterySaverDC: [manual]SPPT

    • STT_SkinTempLimit_APUOnlyAPU_BalancedBatterySaverDC: [manual]

    • FPPT_QuietSTT_SkinTempLimit_HS2_BatterySaverDC: [manual]SPPT_Quiet

  • APMF Function 11 Settings: Disabled / Enabled: [manual]

    SPL_Quiet

    (opens a list of options)

    • T_Perf_to_Turbo: [manual]

    • SPPTT_Balanced_APUOnlyto_QuietPerf: [manual]Fan

    • T_Quiet_IDto_PerfBalanced: [manual]Fan

    • T_Balanced_IDto_BalancedQuiet: [manual]Fan

    • T_Perf_IDto_QuietBalanced: [manual]

    APMF Function 6 Settings: Disabled / Enabled (opens a list of options)

    • ConditionTemp_In_Bag_PolicyT_Turbo_to_Perf: [manual]ConditionTemp_In_Bag_S4_Policy

    • Pfloor_Turbo: [manual]

    • FPPT_In_Bag_PolicyTurbo: [manual]

    • SPPT_In_Bag_PolicyTurbo: [manual]

    • SPPT_ApuOnly_In_Bag_PolicyAPUOnly_Turbo: [manual]

    • SPL_In_Bag_PolicyTurbo: [manual]STTMinLimit

    • STT_InMinLimit_Bag_PolicyTurbo: [manual]

    • STT_SkinTempLimit_APU_In_Bag_PolicySkinTempAPU_Turbo: [manual]

    • STT_SkinTempLimit_HS2_In_Bag_PolicySkinTempHS2_Turbo: [manual]

    • Fan_ID_In_Bag_PolicyTurbo: [manual]

    • Pfloor_Performance: [manual]

    • FPPT_In_Bag_Exit_PolicyPerformance: [manual]

    • SPPT_In_Bag_Exit_PolicyPerformance: [manual]

    • SPPT_ApuOnly_In_Bag_Exit_PolicyAPUOnly_Performance: [manual]

    • SPL_In_Bag_Exit_PolicyPerformance: [manual]

    • STT_MinLimit_Performance: [manual]

    • STTMinLimitSTT_In_Bag_Exit_PolicySkinTempAPU_Performance: [manual]

    • STT_SkinTempLimit_APU_In_Bag_Exit_PolicySkinTempHS2_Performance: [manual]STT

    • Fan_SkinTempLimit_HS2_In_Bag_Exit_PolicyID_Performance: [manual]

    APMF Function 9 Settings: Disabled / Enabled (opens a list of options)

    • fPPT_BestPerfACPfloor_Balanced: [manual]

    • FPPT_Balanced: [manual]

    • sPPTSPPT_BestPerfACBalanced: [manual]sPPT

    • SPPT_APUOnly_APUOnlyBestPerfACBalanced: [manual]

    • SPL_BestPerfACBalanced: [manual]STTMinLimit

    • STT_MinLimit_BestPerfACBalanced: [manual]

    • STT_SkinTempLimitSkinTempAPU_APU_BestPerfACBalanced: [manual]

    • STT_SkinTempLimitSkinTempHS2_HS2_BestPerfACBalanced: [manual]

    • Fan_ID_BestPerfACBalanced: [manual]

    • fPPTPfloor_BetterPerfACQuiet: [manual]sPPT

    • FPPT_BetterPerfACQuiet: [manual]

    • sPPTSPPT_APUOnlyBetterPerfACQuiet: [manual]

    • SPLSPPT_APUOnly_BetterPerfACQuiet: [manual]

    • STTMinLimitSPL_BetterPerfACQuiet: [manual]

    • STT_SkinTempLimitMinLimit_APU_BetterPerfACQuiet: [manual]

    • STT_SkinTempLimitSkinTempAPU_HS2_BetterPerfACQuiet: [manual]

    • FanSTT_IDSkinTempHS2_BetterPerfACQuiet: [manual]

    • fPPT_BetterBatteryAC: [manual]

    sPPT_BetterBatteryAC

  • APMF Function 12 Settings: Disabled / Enabled (opens a list of options)

    • Flags: [manual]sPPT_

    • APUOnlyBetterBatteryACT_Perf_to_Turbo: [manual]

    • SPL_BetterBatteryACT_Balanced_to_Perf: [manual]STTMinLimit_BetterBatteryAC

    • T_Quiet_to_Balanced: [manual]

    • SPL_BetterBatteryAC: [manual]

    • STTMinLimit_BetterBatteryACT_Balanced_to_Quiet: [manual]

    • STTT_SkinTempLimitPerf_APUto_BetterBatteryACBalanced: [manual]STT

    • T_SkinTempLimitTurbo_HS2to_BetterBatteryACPerf: [manual]

    • FanPfloor_ID_BetterBatteryACTurbo: [manual]

    • fPPTFPPT_BestPerfDCTurbo: [manual]sPPT

    • SPPT_BestPerfDCTurbo: [manual]sPPT

    • SPPT_APUOnly_APUOnlyBestPerfDCTurbo: [manual]

    • SPL_BestPerfDCTurbo: [manual]STTMinLimit

    • STT_MinLimit_BestPerfDCTurbo: [manual]

    • STT_SkinTempLimitSkinTempAPU_APU_BestPerfDCTurbo: [manual]

    • STT_SkinTempLimitSkinTempHS2_HS2_BestPerfDCTurbo: [manual]

    • Fan_ID_BestPerfDCTurbo: [manual]

    • fPPTPfloor_BetterPerfDCPerformance: [manual]sPPT

    • FPPT_BetterPerfDCPerformance: [manual]

    • sPPTSPPT_APUOnlyBetterPerfDCPerformance: [manual]

    • SPLSPPT_APUOnly_BetterPerfDCPerformance: [manual]

    • STTMinLimitSPL_BetterPerfDCPerformance: [manual]

    • STT_SkinTempLimitMinLimit_APU_BetterPerfDCPerformance: [manual]

    • STT_SkinTempLimit_HS2_BetterPerfDCSkinTempAPU_Performancev

    • STT_SkinTempHS2_Performance: [manual]

    • Fan_ID_BetterPerfDC_Performance: [manual]

    • Pfloor_Balanced: [manual]

    • fPPTFPPT_BetterBatteryDCBalanced: [manual]sPPT

    • SPPT_BetterBatteryDCBalanced: [manual]sPPT

    • SPPT_APUOnly_APUOnlyBetterBatteryDCBalanced: [manual]

    • SPL_BetterBatteryDCBalanced: [manual]STTMinLimit

    • STT_MinLimit_BetterBatteryDCBalanced: [manual]

    • STT_SkinTempLimitSkinTempAPU_APU_BetterBatteryDCBalanced: [manual]

    • STT_SkinTempLimitSkinTempHS2_HS2_BetterBatteryDCBalanced: [manual]

    • Fan_ID_BetterBatteryDC_Balanced: [manual]

    • Pfloor_Quiet: [manual]

    • fPPTFPPT_BatterySaverDCQuiet: [manual]sPPT

    • SPPT_BatterySaverDCQuiet: [manual]sPPT

    • SPPT_APUOnly_APUOnlyBetterBatteryDCQuiet: [manual]

    • SPL_BatterySaverDCQuiet: [manual]STTMinLimit

    • STT_MinLimit_BatterySaverDCQuiet: [manual]

    • STT_SkinTempLimitSkinTempAPU_APU_BatterySaverDCQuiet: [manual]

    • STT_SkinTempLimitSkinTempHS2_HS2_BatterySaverDCQuiet: [manual]

  • APMF Function 11 13 Settings: Disabled / Enabled : [manual] (opens a list of opf options)

    • T_PerfBalanced_to_TurboPerf: [manual]

    • T_BalancedPerf_to_PerfBalanced: [manual]

    • T_Quiet_to_Balanced: [manual]

    • T_Balanced_to_Quiet: [manual]

    • T_Perf_to_Balanced: [manual]

    • T_Turbo_to_Pfloor_Perf: [manual]

    • Pfloor_TurboBalanced: [manual]FPPT

    • Pfloor_TurboQuiet: [manual]

    • SPPT_Turbo: [manual]

    • SPPT_APUOnly_Turbo: [manual]

    • SPL_TurboP_delta_Balanced_to_Perf: [manual]

    • STT_MinLimit_TurboP_delta_Perf_to_Balanced: [manual]STT_SkinTempAPU_Turbo

    • P_delta_Quiet_to_Balanced: [manual]STT_

    • SkinTempHS2_TurboP_delta_Balanced_to_Quiet: [manual]Fan

    • _ID_TurboSTT_SkinTempLimit_APU_Perf_on_Lap: [manual]

    • Pfloor_PerformanceSTT_SkinTempLimit_HS2_Perf_on_Lap: [manual]FPPT_

    • PerformanceSTT_SkinTempLimit_APU_Perf: [manual]

    • SPPT_PerformanceSTT_SkinTempLimit_HS2_Perf: [manual]SPPT

    • STT_SkinTempLimit_APUOnlyAPU_PerformanceBalanced: [manual]SPL_Performance

    • STT_SkinTempLimit_HS2_Balanced: [manual]

    • STT_SkinTempLimit_MinLimitAPU_PerformanceQuiet: [manual]

    • STT_SkinTempAPUSkinTempLimit_PerformanceHS2: [manual]STT

    • STTMinLimit_Perf_SkinTempHS2on_Performancelap: [manual]Fan

    • STTMinLimit_ID_PerformancePerf: [manual]

    • PfloorSTTMinLimit_Balanced: [manual]FPPT

    • STTMinLimit_BalancedQuiet: [manual]SPPT_Balanced

    • FPPT_Perf_on_lap: [manual]

    • SPPT_Perf_APUOnlyon_Balancedlap: [manual]

    • SPL_BalancedPerf_on_lap: [manual]STT_MinLimit

    • _BalancedSPPT_APUOnly_Perf_on_Lap: [manual]

    • STT_SkinTempAPU_BalancedFPPT_Perf: [manual]

    • SPPT_Perf: [manual]

    • STTSPL_SkinTempHS2_BalancedPerf: [manual]Fan

    • SPPT_IDAPUOnly_BalancedPerf: [manual]

    • PfloorFPPT_QuietBalanced: [manual]FPPT

    • SPPT_QuietBalanced: [manual]SPPT

    • SPL_QuietBalanced: [manual]

    • SPPT_APUOnly_QuietBalanced: [manual]

    • SPLFPPT_Quiet: [manual]

    • STT_MinLimitSPPT_Quiet: [manual]STT_SkinTempAPU

    • SPL_Quiet: [manual]

    • STTSPPT_SkinTempHS2APUOnly_Quiet: [manual]

    APMF Function 12 Settings: Disabled / Enabled

    • Fan_ID_Perf: [manual]

    APMF Function 13 Settings: Disabled / Enabled:

    • Fan_ID_Balanced: [manual]

  • APMF Function 14 Settings: Disabled / Enabled: [manual]

• RAS:

  • PCIe Root Port Corr Err Mask Reg: [manual]

  • PCIe Root Port UnCorr Err Mask Reg: [manual]

  • Pcie Port UnCorr Error Sev Reg: [manual]

  • PCIe Device Corr Err Mask Reg: [manual]

  • PCIe Device UnCorr Err Mask Reg: [manual]

  • Pcie Device UnCorr Error Sev Reg: [manual]

• Above 4GB MMIO Limit:
  35bit (32GB)
  36bit (64GB)
  37bit (128GB)
  38bit (256GB)
  39bit (512GB)
  40bit (1TB) default
  41bit (2TB)
  42bit (4TB)
  43bit (8TB)
  44bit (16TB)
  45bit (32TB)
  46bit (64TB)
  47bit (128TB)
  48bit (256TB)

• 5V_S5 voltage: 5v_ALW(default) / 5v_ALW +60mv / 5v_ALW +100mv

• AMD KVM Mouse Protocol: Auto(default) / Simple / Absolute

• Processor Aggregator Device: Disabled / Enabled

• APIC Software Enable: Disabled / Enabled

• Dynamic P3T limit: Enable for DC-only case (include fake DC) / Disabled / Enabled

• PD Firmware Update: Disabled / Enabled

• South Bridge:

  • SB USB configuration, enable disable different USB port options.

• GFX Configuration:

  • NOT SUPPORTED

• North Bridge:

  • DDR Memmory data.

• change Administrator Password.

• change User Password.

• HDD Security Configuration: Displays NVME / HDD security info

• secure boot options:

  • enable/disable secure boot.

  • secure boot mode.

• In Boot Configuration you can:

  • choose the bios wait time before it continues booting.

  • choose NumLock state on boot process enabled/disabled.

  • choose quiet boot options.

• In Boot Option Priorities you can:

  • choose boot order

  • enable/disable fast boot

  • choose SATA properties

  • enable/disable NVME support

  • enable/disable VGA support

  • choose USB support properties

  • nable/disabl PS2 devices support

  • enable/disable Network stack support

  • enable/disable USB Mass Storage support

• In Save options you can:

  • save, discard changes made in the BIOS configuration.

  • reset the device and exit BIOS and continue the boot process.

• In Default Options you can:

  • save user configurations.

  • restore default configuration.

• In Boot Override you can:

  • choose boot device, disregarding the chosen boot order.