...
Advanced screen:
Trusted Computing:
| Expand | ||
|---|---|---|
| ||
|
AMD fTPM configuration:
choose tpm device.
erase ftpm
ACPI Settings:
enable/disable ACPI Auto Configuration
enable/disable Hibernation: enables to go into S4 sleep state
ACPI Sleep State: decide what ot do on sleep suspend to RAM / suspend disabled
enable/disable Lock Legacy Resources
S5 RTC Wake Settings:
Wake system from S5: Disabled / Fixed Time / Dynamic Time
UEFI Variables Protection:
enable/disable Password protection of Runtime Variables
Serial Port Console Redirection:
enable/disable Console Redirection
Console Redirection Settings:
Terminal Type (BIOS visual personalization): VT100 / VT100Plus / VT-UTF8 / ANSI
Bits per second: 9600 / 19200 / 38400 / 57600 / 115200
Data Bits: 7 / 8
Parity: None / Even / Odd / Mark / Space
Stop Bits: 1 / 2
Flow Control: None / Hardware RTS/CTS
VT-UTF8 Combo Key Support: Disabled / Enabled
Recorder Mode: Disabled / Enabled
Resolution 100x31: Disabled / Enabled
Putty KeyPad: VT100 / LINUX / XTERMR6 / SCO / ESCN / VT400
Console Redirection EMS: Disabled / Enabled (opens configuration options)
Terminal Type EMS: VT100 / VT100Plus / VT-UTF8 / ANSI
Bits per second EMS: 9600 / 19200 / 57600 / 115200
Flow Control EMS: None / 'Hardware RTS/CTS ' / Software Xon/Xoff
CPU Configuration:
PSS Support: Disabled / Enabled
PPC Adjustment: PState 0 / PState 1 / PState 2
NX Mode: Disabled / Enabled
SVM Mode: Disabled / Enabled
Node 0 Information (opens new window with memory information related to node 0)
IDE Configuration:
NONE
Debug Port Table Configuration:
Debug Port Table: Disabled / Enabled
Debug Port Table 2: Disabled / Enabled
Option ROM Dispatch Policy:
Restore if Failure: Disabled / Enabled (ifenaabled and system fails to boot it will restore this and CSM screens settings to default)
Primary Video Ignore: Disabled / Enabled
WARNING:
Changing Device(s) Option ROM dispatch policy may affect system’s ability to post and/or boot!
PROCEED WITH CAUTION!On Board Network Controller: Disabled / Enabled
Slot #32 Mass Storage Controller: Disabled / Enabled
Slot #33 Mass Storage Controller: Disabled / Enabled
Slot #34 Network Controller: Disabled / Enabled
Slot #49 Network Controller: Disabled / Enabled
Slot #51 Network Controller: Disabled / Enabled
PCI Subsystem Settings:
WARNING:
Changing PCI Device(s) settings may have unwanted side effects!
System may HANG!
PROCEED WITH CAUTION.Above 4G Decoding: Disabled / Enabled
Re-Size BAR Support: Disabled / Enabled
SR-IOV Support: Disabled / Enabled
BME DMA Mitigation: Disabled / Enabled
Hot-Plug Support: Disabled / Enabled
USB Configuration:
Legacy USB Support: Disabled / Enabled
XHCI Hand-off: Disabled / Enabled
USB Mass Storage Driver Support: Disabled / Enabled
USB transfer time-out: 1 sec / 5 sec / 10 sec / 20 sec
Device reset time-out: 10 sec / 20 sec / 30 sec / 40 sec
Device power-up delay: Auto / Manual (opens another option)
Device power-up delay in seconds: [your custom delay]
list of USB mass storage devices with option to choose their type:
Auto / Floppy / Forced FDD / Hard Disk / CD-ROM
Network Stack Configuration:
Network Stack: Disabled / Enabled (opens list of options)
IPv4 PXE Support: Disabled / Enabled
IPv4 HTTP Support: Disabled / Enabled
IPv6 PXE Support: Disabled / Enabled
IPv6 HTTP Support: Disabled / Enabled
PXE boot wait time: [your custom wait time]
Media detect count: [your custom retry count]
NVMe Configuration:
lists your NVME drives, and allows you to run tests also shows last test results and drive data:
Self Test Option: Short / Extended
Self Test Action: Controller Only Test / Controller and NameSpace Test
Run Device Self Test
Demo Board:
Onboard PCIE LAN PXE ROM: Disabled / Enabled
PCI-E Port:
Pcie Port Control: Disabled / Enabled (opens a menu for each PCI-E device)
Device $ Fun $: Disabled / Enabled / Auto
ASPM Mode(Dev#$/Func#$): Disabled / L0s Entry / L1 Entry / L0s And L1 Entry / Auto
Hotplug Mode(Dev#$/Func#$): Disabled / Hotplug Basic / Hotplug Server / Hotplug Enhanced / Hotplug Inboard / Auto
PCR7 WA Support: Disabled / Enabled / Auto
Secure Devices ACPI Table:
SDEV ACPI: Disabled / Enabled
RAM Disk Configuration:
Disk Memory Type: Boot Service Data / Reserved
Create raw: Create a new RAM disk with the given starting and ending address.
Create from file: Create a new RAM disk from a file, opens a menu with all your storage devices to choose.
Remove selected RAM disk(s)
Tls Auth Configuration:
add / remove client certificate
AMD PBS:
AMD Firmware Version: displays AMDs firmware information
PCI Express Configurations:
Pcie Dxio Timing ControlEnable: Disabled / Enabled
PCIe x4 Slot-1: Disabled / Enabled
AMD XGBE Path Selection: On Board Ports / Add In Card / Disabled
XGBE Port0/1 controller: RJ45 / SFP
XGBE Port0/1 Mode Selection: 10G/1G Backplane / 2.5G Backplane / SFP+ connector / Backplane AN OFF
XGBE Port0/1 Speed Selection: 1G / 10G / '10G/1G' / 100Mbps / 10Mbps
PXE BOOT: PORT 0 / PORT 1
PCIE 2x8 slots: Disabled / Enabled
M.2/PCIe Slot: M.2 NVMe (x4) / M.2 NVMe (x2) / PCIe Slot-3 (x4)
PCIe GPP Slot Hotplug support: Disabled / Enabled
PCIe dGPU Slot Hotplug support: Disabled / Enabled
NVMe RAID mode: Disabled / Enabled
Power Saving Configurations:
S3/Modern Standby Support: S3 Enable / Modern Standby Enable
Wake on PME: determines the action when system power is off and PCI enable wake up event occurs. Disabled / Enabled
Internal PCIe GPP 0 D3: Disabled / Enabled
SOC GPU D3: Disabled / Enabled
SOC HD Audio D3: Disabled / Enabled
SOC USB3.1 D3: Disabled / Enabled
SOC ACP D3: Disabled / Enabled
SOC Azalia D3: Disabled / Enabled
Internal PCIe GPP 2 D3: Disabled / Enabled
SOC USB2.0 D3: Disabled / Enabled
SOC USB3.1 for USB4 D3: Disabled / Enabled
SOC USB4 D3: Disabled / Enabled
Internal USB4 PCIe Tunneling D3: enable internal USB4 PCIe tunneling D3 abd add into PEP Device dependency list. Disabled / Enabled
SOC USB4 PCIe Endpoint D3: Disabled / Enabled
Unused GPP Clocks Off: Disabled / Enabled
Clock PM: CLK_REQ0: Disabled / Enabled
Clock PM: CLK_REQ1: Disabled / Enabled
Clock PM: CLK_REQ2: Disabled / Enabled
Clock PM: CLK_REQ3: Disabled / Enabled
Clock PM: CLK_REQ4: Disabled / Enabled
Clock PM: CLK_REQ5: Disabled / Enabled
Clock PM: CLK_REQ6: Disabled / Enabled
Z-states support on non-Z10 capable PCIe: Disabled / Enabled
Graphics Configurations:
EVAL Slot Power Enable: Disabled / Enabled
EVAL CARD T-Diode Routing Select: EC / APU SMBUS0
D3Cold Support: Disabled / Enabled
NVIDIA DGPU Power Enable: Disabled / Enabled
Discrete GPU _DSM Function A: Disabled / Enabled
Discrete GPU _DSM Function B: Disabled / Enabled
Non-Eval Discrete GPU Support: Disabled / Enabled
Discrete GPU HPD Circuitry: OR Circuitry / Pulse Circuitry
Discrete GPU's Audio: Disabled / Keep ROM Strap Setting
Discrete GPU's USB Port: Keep Default Setting / Disabled
Discrete GPU's SSID/SVID: Program by Vendor / Keep Default Setting
Discrete GPU's VGA SSID/SVID: [manual]
Discrete GPU's AUDIO SSID/SVID: [manual]
Discrete GPU BOMACO Support: Disabled / Enabled
BLINK LED: Disabled / Enabled
ATIF Function 23 Support: Disabled / Enabled
Primary Video Adaptor: Ext Graphics (PEG) / Int Graphics (IGD)
Display Configurations:
DP0 Select: Default (DP) / DP display / HDMI display
DP1 Select: Default (DP) / DP display / HDMI display
Adjust DP Caps: Soc Default / Cap override
DP2: Default (DP with TypeC) / EDP display / HDMI display / DP with TypeC display / DP without TypeC display
Adjust DP Caps: Soc Default / Cap override
DP2 Over USBC2: DP with TypeC display / Default (DP with TypeC) / DP without TypeC display
DP3/HDMI1/USB6: USB / Default (DP without TypeC) / DP display / HDMI display
USB/Thunderbolt Configurations:
PD USB4 Control Enable/Disable: Disabled / Enabled
USB4 Bus Reserved:
USB4 Non-Prefetch Memory Reserved: [manual]
USB4 non-Prefetch MMIO align (0 ~ 65534 MB): [manual]
USB4 Prefetch Memory Reserved: [manual]
USB4 Prefetch MMIO align (0 ~ 65534 MB): [manual]
USB Camera Enable: Disabled / Enabled
USB Finger Printer Enable: Disabled / Enabled
UCSI Support: Disabled / Enabled
USBC Port Harware Disable Support: Disabled / Enabled
Reconfig Rebalance Resources by OS: Disabled / Enabled
PD Thunderbolt3 Alt Mode: Disabled / Enabled
USB4 ACPI _DEP Support: Disabled / Enabled
Audio Configurations:
Wake On Voice: Disabled / Enabled
ACP Power Gating: Disabled / Enabled
ACP CLock Gating: Disabled / Enabled
SoundWire SSDT Support: Disabled / Enabled
TDM2_DIN Pull High: Disabled / Enabled
I2C Configurations:
MITT/WITT Selection: Both disable / WITT Only / MITT Only
Thermal Configurations:
APU PROCHOT# setting:
Enable APU_PROCHOT# in pure-DC case /
Disable APU_PROCHOT# /
Enable APU_PROCHOT# in pure-AC case /
Enable APU_PROCHOT# in either pure-DC or pure-AC case (not AC+DC)AMD DPTC interface: Disabled / Enabled
STT sensor reporting: Disabled / Enabled
MP2 Configurations:
Power Sensors Routing Select: WALLE lite PDT / WALLE lite PM log
Turn off Xtal (S3/S5): Disabled / Enabled
Sensor Fusion User Mode Driver: Disabled / Enabled
Allocate 100KB For MP2: Disabled / Enabled
Wake On Human Presence detection WA: Disabled / Enabled
Debug Configurations:
Serial Debug Message Under OS: Disabled / Enabled
Debug Print In ASL: Disabled / Enabled
iLA TraceMemoryEn: Disabled / Enabled
StallForUnlock: Disabled / Enabled
AMD PMF Settings:
AMD PMF Device Support: Disabled / Enabled (opens a list of options)
APMF Function 1 Settings:
Time interval for PMF to send heartbeat signal to BIOS (seconds): [manual]
APMF Function 3 Settings:
AMPF Function 3: Disabled / Enabled (opens a list of options)
AC_Best_Performance_Limit: [manual]
Fan_ID_AC_Best_Performance_Limit: [manual]
AC_Better_Performance_Limit: [manual]
Fan_ID_AC_Better_Performance_Limit: [manual]
AC_Better_Battery_Limit: [manual]
Fan_ID_AC_Better_Battery_Limit: [manual]
DC_Best_Performance_Limit: [manual]
Fan_ID_DC_Best_Performance_Limit: [manual]
DC_Better_Performance_Limit: [manual]
Fan_ID_DC_Better_Performance_Limit: [manual]
DC_Better_Battery_Limit: [manual]
Fan_ID_DC_Better_Battery_Limit: [manual]
DC_Battery_Saver_Limit: [manual]
Fan_ID_DC_Battery_Saver_Limit: [manual]
APMF Function 4 Settings: Disabled / Enabled
APMF Function 5 Settings: Disabled / Enabled (opens a list of options)
T_Balanced_to_Perf : [manual]
T_Perf_to_Balanced: [manual]
T_Quiet_to_Balanced: [manual]
T_Balanced_to_Quiet: [manual]
Pfloor_Perf: [manual]
Pfloor_Balanced: [manual]
Pfloor_Quiet: [manual]
P_delta_Balanced_to_Perf: [manual]
P_delta_Perf_to_Balanced: [manual]
P_delta_Quiet_to_Balanced: [manual]
P_delta_Balanced_to_Quiet: [manual]
STT_SkinTempLimit_APU_Perf_on_Lap: [manual]
STT_SkinTempLimit_HS2_Perf_on_Lap: [manual]
STT_SkinTempLimit_APU_Perf: [manual]
STT_SkinTempLimit_HS2_Perf: [manual]
STT_SkinTempLimit_APU_Balanced: [manual]
STT_SkinTempLimit_HS2_Balanced: [manual]
STT_SkinTempLimit_APU_Quiet: [manual]
STT_SkinTempLimit_HS2: [manual]
STTMinLimit_Perf_on_lap: [manual]
STTMinLimit_Perf: [manual]
STTMinLimit_Balanced: [manual]
STTMinLimit_Quiet: [manual]
FPPT_Perf_on_lap: [manual]
SPPT_Perf_on_lap: [manual]
SPL_Perf_on_lap: [manual]
SPPT_APUOnly_Perf_on_Lap: [manual]
FPPT_Perf: [manual]
SPPT_Perf: [manual]
SPL_Perf: [manual]
SPPT_APUOnly_Perf: [manual]
FPPT_Balanced: [manual]
SPPT_Balanced: [manual]
SPL_Balanced: [manual]
SPPT_APUOnly_Balanced: [manual]
FPPT_Quiet: [manual]
SPPT_Quiet: [manual]
SPL_Quiet: [manual]
SPPT_APUOnly_Quiet: [manual]
Fan_ID_Perf: [manual]
Fan_ID_Balanced: [manual]
Fan_ID_Quiet: [manual]
APMF Function 6 Settings: Disabled / Enabled (opens a list of options)
ConditionTemp_In_Bag_Policy: [manual]
ConditionTemp_In_Bag_S4_Policy: [manual]
FPPT_In_Bag_Policy: [manual]
SPPT_In_Bag_Policy: [manual]
SPPT_ApuOnly_In_Bag_Policy: [manual]
SPL_In_Bag_Policy: [manual]
STTMinLimit_In_Bag_Policy: [manual]
STT_SkinTempLimit_APU_In_Bag_Policy: [manual]
STT_SkinTempLimit_HS2_In_Bag_Policy: [manual]
Fan_ID_In_Bag_Policy: [manual]
FPPT_In_Bag_Exit_Policy: [manual]
SPPT_In_Bag_Exit_Policy: [manual]
SPPT_ApuOnly_In_Bag_Exit_Policy: [manual]
SPL_In_Bag_Exit_Policy: [manual]
STTMinLimit_In_Bag_Exit_Policy: [manual]
STT_SkinTempLimit_APU_In_Bag_Exit_Policy: [manual]
STT_SkinTempLimit_HS2_In_Bag_Exit_Policy: [manual]
APMF Function 9 Settings: Disabled / Enabled (opens a list of options)
fPPT_BestPerfAC: [manual]
sPPT_BestPerfAC: [manual]
sPPT_APUOnlyBestPerfAC: [manual]
SPL_BestPerfAC: [manual]
STTMinLimit_BestPerfAC: [manual]
STT_SkinTempLimit_APU_BestPerfAC: [manual]
STT_SkinTempLimit_HS2_BestPerfAC: [manual]
Fan_ID_BestPerfAC: [manual]
fPPT_BetterPerfAC: [manual]
sPPT_BetterPerfAC: [manual]
sPPT_APUOnlyBetterPerfAC: [manual]
SPL_BetterPerfAC: [manual]
STTMinLimit_BetterPerfAC: [manual]
STT_SkinTempLimit_APU_BetterPerfAC: [manual]
STT_SkinTempLimit_HS2_BetterPerfAC: [manual]
Fan_ID_BetterPerfAC: [manual]
fPPT_BetterBatteryAC: [manual]
sPPT_BetterBatteryAC: [manual]
sPPT_APUOnlyBetterBatteryAC: [manual]
SPL_BetterBatteryAC: [manual]
STTMinLimit_BetterBatteryAC: [manual]
SPL_BetterBatteryAC: [manual]
STTMinLimit_BetterBatteryAC: [manual]
STT_SkinTempLimit_APU_BetterBatteryAC: [manual]
STT_SkinTempLimit_HS2_BetterBatteryAC: [manual]
Fan_ID_BetterBatteryAC: [manual]
fPPT_BestPerfDC: [manual]
sPPT_BestPerfDC: [manual]
sPPT_APUOnlyBestPerfDC: [manual]
SPL_BestPerfDC: [manual]
STTMinLimit_BestPerfDC: [manual]
STT_SkinTempLimit_APU_BestPerfDC: [manual]
STT_SkinTempLimit_HS2_BestPerfDC: [manual]
Fan_ID_BestPerfDC: [manual]
fPPT_BetterPerfDC: [manual]
sPPT_BetterPerfDC: [manual]
sPPT_APUOnlyBetterPerfDC: [manual]
SPL_BetterPerfDC: [manual]
STTMinLimit_BetterPerfDC: [manual]
STT_SkinTempLimit_APU_BetterPerfDC: [manual]
STT_SkinTempLimit_HS2_BetterPerfDC: [manual]
Fan_ID_BetterPerfDC: [manual]
fPPT_BetterBatteryDC: [manual]
sPPT_BetterBatteryDC: [manual]
sPPT_APUOnlyBetterBatteryDC: [manual]
SPL_BetterBatteryDC: [manual]
STTMinLimit_BetterBatteryDC: [manual]
STT_SkinTempLimit_APU_BetterBatteryDC: [manual]
STT_SkinTempLimit_HS2_BetterBatteryDC: [manual]
Fan_ID_BetterBatteryDC: [manual]
fPPT_BatterySaverDC: [manual]
sPPT_BatterySaverDC: [manual]
sPPT_APUOnlyBetterBatteryDC: [manual]
SPL_BatterySaverDC: [manual]
STTMinLimit_BatterySaverDC: [manual]
STT_SkinTempLimit_APU_BatterySaverDC: [manual]
STT_SkinTempLimit_HS2_BatterySaverDC: [manual]
APMF Function 11 Settings: Disabled / Enabled: [manual] (opens a list of options)
T_Perf_to_Turbo: [manual]
T_Balanced_to_Perf: [manual]
T_Quiet_to_Balanced: [manual]
T_Balanced_to_Quiet: [manual]
T_Perf_to_Balanced: [manual]
T_Turbo_to_Perf: [manual]
Pfloor_Turbo: [manual]
FPPT_Turbo: [manual]
SPPT_Turbo: [manual]
SPPT_APUOnly_Turbo: [manual]
SPL_Turbo: [manual]
STT_MinLimit_Turbo: [manual]
STT_SkinTempAPU_Turbo: [manual]
STT_SkinTempHS2_Turbo: [manual]
Fan_ID_Turbo: [manual]
Pfloor_Performance: [manual]
FPPT_Performance: [manual]
SPPT_Performance: [manual]
SPPT_APUOnly_Performance: [manual]
SPL_Performance: [manual]
STT_MinLimit_Performance: [manual]
STT_SkinTempAPU_Performance: [manual]
STT_SkinTempHS2_Performance: [manual]
Fan_ID_Performance: [manual]
Pfloor_Balanced: [manual]
FPPT_Balanced: [manual]
SPPT_Balanced: [manual]
SPPT_APUOnly_Balanced: [manual]
SPL_Balanced: [manual]
STT_MinLimit_Balanced: [manual]
STT_SkinTempAPU_Balanced: [manual]
STT_SkinTempHS2_Balanced: [manual]
Fan_ID_Balanced: [manual]
Pfloor_Quiet: [manual]
FPPT_Quiet: [manual]
SPPT_Quiet: [manual]
SPPT_APUOnly_Quiet: [manual]
SPL_Quiet: [manual]
STT_MinLimit_Quiet: [manual]
STT_SkinTempAPU_Quiet: [manual]
STT_SkinTempHS2_Quiet: [manual]
APMF Function 12 Settings: Disabled / Enabled: [manual]
APMF Function 13 Settings: Disabled / Enabled: [manual]
APMF Function 14 Settings: Disabled / Enabled: [manual]
RAS:
PCIe Root Port Corr Err Mask Reg: [manual]
PCIe Root Port UnCorr Err Mask Reg: [manual]
Pcie Port UnCorr Error Sev Reg: [manual]
PCIe Device Corr Err Mask Reg: [manual]
PCIe Device UnCorr Err Mask Reg: [manual]
Pcie Device UnCorr Error Sev Reg: [manual]
Above 4GB MMIO Limit:
35bit (32GB)
36bit (64GB)
37bit (128GB)
38bit (256GB)
39bit (512GB)
40bit (1TB) default
41bit (2TB)
42bit (4TB)
43bit (8TB)
44bit (16TB)
45bit (32TB)
46bit (64TB)
47bit (128TB)
48bit (256TB)5V_S5 voltage: 5v_ALW(default) / 5v_ALW +60mv / 5v_ALW +100mv
AMD KVM Mouse Protocol: Auto(default) / Simple / Absolute
Processor Aggregator Device: Disabled / Enabled
APIC Software Enable: Disabled / Enabled
Dynamic P3T limit: Enable for DC-only case (include fake DC) / Disabled / Enabled
PD Firmware Update: Disabled / Enabled
AMD CBS:
CPU Common Options:
Prefetcher settings:
L1 Stream HW Prefetcher: Auto / Disabled / Enabled
2 Stream HW Prefetcher: Auto / Disabled / Enabled
Core Watchdog:
Core Watchdog Timer Enable: Disabled / Enabled (opens more options)
Core Watchdog Timer Interval: Auto / 21.461s - 39us
Core Watchdog Timer Severity:
Auto
Fatal
Uncorrected
Deferred
Corrected
Transparent
No Error
CCD/Core/Thread Enablement:
Core control: Auto / ONE / TWO / THREE / FOUR / FIVE / SIX / SEVEN
RedirectForReturnDis: Auto / 0 / 1
Core Performance Boost: Auto / Disabled
lobal C-state Control: Auto / Disabled / Enabled
Opcache Control: Auto / Disabled / Enabled
SEV ASID Count: Auto / 253 ASIDs / 509 ASIDs
SEV-ES ASID Space Limit Control: Auto / manual (opens another option)
SEV-ES ASID Space Limit: [manual]
Streaming Stores Control: Auto / Disabled / Enabled
Local APIC Mode: Auto / xAPIC / x2APIC
ACPI _CST C1 Declaration: Auto / Disabled / Enabled
MCA error thresh enable: True / False
MCA error thresh count: FF5 (default) [manual]
SMU and PSP Debug Mode: Auto / Disabled / Enabled
PPIN Opt-in: Auto / Disabled / Enabled
Action on BIST Failure: Auto / Down-Core / Do nothing
IBS hardware workaround: Auto / Down-Core / Do nothing
DF Common Options:
Scrubber:
DRAM scrub time(hours): Auto / Disabled / 1h / 4h / 8h / 16h / 24h / 48h
Poison scrubber control: Auto / Disabled / Enabled
Redirect scrubber control: Auto / Disabled / Enabled
Redirect scrubber limit: Auto / Infinite / 2 / 4 / 8
DRAM map inversion: Auto / Disabled / Enabled
Memory Addressing:
Memory interleaving size: Auto / 256 Bytes / 512 Bytes / 1 KB / 2 KB
CC6 memory region encryption: Auto / Disabled / Enabled
Memory Clear: Auto / Disabled / Enabled
Disable DF to external downstream IP SyncFloodPropagation: Auto / Sync flood enabled / Sync flood disabled
Disable DF sync flood propagation: Auto / Sync flood enabled / Sync flood disabled
Freeze DF module queues on error: Auto / Disabled / Enabled
DF Cstates: Auto / Disabled / Enabled
UMC Common Options:
NBIO Common Options:
FCH Common Options:
SMU Common Options:
System Configuration (TDP): Auto / 10W / 15W / 25W / 35W / 45W / 54W
Sustained Power Limit: [manual]
PPT Control: Auto / Manual (opens manual value input option)
STAPM Control: Auto / Manual (opens manual value input option)
Thermal Control: Auto / Manual (opens manual value input option)
TDC Control: Auto / Manual (opens manual value input option)
EDC Control: Auto / Manual (opens manual value input option)
PSI3 Control: Auto / Manual (opens manual value input option)
PROCHOT Control: Auto / Manual (opens manual value input option)
STT Control: Auto / Manual (opens manual value input option)
Fan Control: Auto / Manual (opens manual value input option)
VDDP Voltage Control: Auto / Manual (opens manual value input option)
VDDM Voltage Control: Auto / Manual (opens manual value input option)
SmartShift Control:
SmartShift Control: Auto / Manual(opens more options)
SmartShift Enable: Auto / Disabled / Enabled
APU Only sPPT Limit: [manual]
Sustained PowerLimit: [manual]
Fast PPT Limit: [manual]
Slow PPT Limit: [manual]
Zstates (Z9 and Z10): Auto / Disabled / Enabled
SOC Miscellaneous Control:
PSP RPMC Switch: Auto / Disabled / Enabled
Firmware Anti-rollback (FAR):
Initial SPL value for FAR: [manual]
FAR Switch: Disabled / Enabled
Rom Armor support: Auto / Disabled / Enabled
ABL Console Out Control: Auto / Disabled / Enabled
Secured-core Auto enablement: Auto / Disabled / Enabled
Pluton (HSP) Options:
Pluton (HSP) X86 Firmware Support: Auto / Disabled / Enabled
Pluton (HSP) UART: Auto / Disabled / Enabled
Pluton (HSP) FIPS: Auto / Disabled / Enabled
Pluton (HSP) ACPI Fence Enable: Auto / True / False
AIM-T Options:
AGESA MPM support:
KVM for Wired Manageability: Auto / Disabled / Enabled
Wireless Manageability: Auto / Disabled / Enabled (opens more options)
KVM for Wireless Manageability: Auto / Disabled / Enabled
TCR for Wireless Manageability: Auto / Disabled / Enabled
Intrusion Detection:
Intrusion Detection settings: [manual] requires password to show settings
Mixed DIMM config extended NUMA domain: Auto / Disabled / Enabled
Displays 4 Intel NICs if they are present and flashed:
when chosen displays brief NIC info, link status and MAC address.
Driver Health: displays Intel NICs driver status: Healthy / Not Healty.
Chipset screen:
South Bridge:
SB USB configuration, enable disable different USB port options.
GFX Configuration:
NOT SUPPORTED
North Bridge:
DDR Memmory data.
...