Content Comparison

• bios information

• system language

• System Date

• System Time

• enable/disable tpm

• enable/disable PCR Banks

• clear TPM pending operation

• enable/disable Platform Hierarchy

• enable/disable Storage Hierarchy

• enable/disable Endorsement Hierarchy

• Device Select select (tpm version)

• enable/disable Disable Block Sid

• choose tpm device

• erase ftpm

• enable/disable ACPI Auto Configuration

• enable/disable Hibernation: enables to go into S4 sleep state

• ACPI Sleep State: decide what ot do on sleep suspend to RAM / suspend disabled

• enable/disable Lock Legacy Resources

• Wake system from S5: Disabled / Fixed Time / Dynamic Time

• enable/disable Password protection of Runtime Variables

• enable/disable Console Redirection

• Console Redirection Settings:

  • Terminal Type (BIOS visual personalization): VT100 / VT100Plus / VT-UTF8 / ANSI

  • Bits per second: 9600 / 19200 / 38400 / 57600 / 115200

  • Data Bits: 7 / 8

  • Parity: None / Even / Odd / Mark / Space

  • Stop Bits: 1 / 2

  • Flow Control: None / Hardware RTS/CTS

  • VT-UTF8 Combo Key Support: Disabled / Enabled

  • Recorder Mode: Disabled / Enabled

  • Resolution 100x31: Disabled / Enabled

  • Putty KeyPad: VT100 / LINUX / XTERMR6 / SCO / ESCN / VT400

• Console Redirection EMS: Disabled / Enabled (opens configuration options)

  • Terminal Type EMS: VT100 / VT100Plus / VT-UTF8 / ANSI

  • Bits per second EMS: 9600 / 19200 / 57600 / 115200

  • Flow Control EMS: None / 'Hardware RTS/CTS ' / Software Xon/Xoff

• PSS Support: Disabled / Enabled

• PPC Adjustment: PState 0 / PState 1 / PState 2

• NX Mode: Disabled / Enabled

• SVM Mode: Disabled / Enabled

• Node 0 Information (opens new window with memory information related to node 0)

• NONE

• Debug Port Table: Disabled / Enabled

• Debug Port Table 2: Disabled / Enabled

• Restore if Failure: Disabled / Enabled (ifenaabled and system fails to boot it will restore this and CSM screens settings to default)

• Primary Video Ignore: Disabled / Enabled

• On Board Network Controller: Disabled / Enabled

• Slot #32 Mass Storage Controller: Disabled / Enabled

• Slot #33 Mass Storage Controller: Disabled / Enabled

• Slot #34 Network Controller: Disabled / Enabled

• Slot #49 Network Controller: Disabled / Enabled

• Slot #51 Network Controller: Disabled / Enabled

• Above 4G Decoding: Disabled / Enabled

• Re-Size BAR Support: Disabled / Enabled

• SR-IOV Support: Disabled / Enabled

• BME DMA Mitigation: Disabled / Enabled

• Hot-Plug Support: Disabled / Enabled

• Legacy USB Support: Disabled / Enabled

• XHCI Hand-off: Disabled / Enabled

• USB Mass Storage Driver Support: Disabled / Enabled

• USB transfer time-out: 1 sec / 5 sec / 10 sec / 20 sec

• Device reset time-out: 10 sec / 20 sec / 30 sec / 40 sec

• Device power-up delay: Auto / Manual (opens another option)

  • Device power-up delay in seconds: [your custom delay]

• list of USB mass storage devices with option to choose their type:
  Auto / Floppy / Forced FDD / Hard Disk / CD-ROM

• Network Stack: Disabled / Enabled (opens list of options)

  • IPv4 PXE Support: Disabled / Enabled

  • IPv4 HTTP Support: Disabled / Enabled

  • IPv6 PXE Support: Disabled / Enabled

  • IPv6 HTTP Support: Disabled / Enabled

  • PXE boot wait time: [your custom wait time]

  • Media detect count: [your custom retry count]

• lists your NVME drives, and allows you to run tests also shows last test results and drive data:

  • Self Test Option: Short / Extended

  • Self Test Action: Controller Only Test / Controller and NameSpace Test

  • Run Device Self Test

Onboard PCIE LAN PXE ROM: Disabled / Enabled

PCI-E Port:

Pcie Port Control: Disabled / Enabled (opens a menu for each PCI-E device)

Device $ Fun $: Disabled / Enabled / Auto

ASPM Mode(Dev#$/Func#$): Disabled / L0s Entry / L1 Entry / L0s And L1 Entry / Auto

Hotplug Mode(Dev#$/Func#$): Disabled / Hotplug Basic / Hotplug Server / Hotplug Enhanced / Hotplug Inboard / Auto

PCR7 WA Support: Disabled / Enabled / Auto

• SDEV ACPI: Disabled / Enabled

• Disk Memory Type: Boot Service Data / Reserved

• Create raw: Create a new RAM disk with the given starting and ending address.

• Create from file: Create a new RAM disk from a file, opens a menu with all your storage devices to choose.

• Remove selected RAM disk(s)

• add / remove client certificate

• AMD Firmware Version: displays AMDs firmware information

• PCI Express Configurations:

  • Pcie Dxio Timing ControlEnable: Disabled / Enabled

  • PCIe x4 Slot-1: Disabled / Enabled

  • AMD XGBE Path Selection: On Board Ports / Add In Card / Disabled

  • XGBE Port0/1 controller: RJ45 / SFP

  • XGBE Port0/1 Mode Selection: 10G/1G Backplane / 2.5G Backplane / SFP+ connector / Backplane AN OFF

  • XGBE Port0/1 Speed Selection: 1G / 10G / '10G/1G' / 100Mbps / 10Mbps

  • PXE BOOT: PORT 0 / PORT 1

  • PCIE 2x8 slots: Disabled / Enabled

  • M.2/PCIe Slot: M.2 NVMe (x4) / M.2 NVMe (x2) / PCIe Slot-3 (x4)

  • PCIe GPP Slot Hotplug support: Disabled / Enabled

  • PCIe dGPU Slot Hotplug support: Disabled / Enabled

  • NVMe RAID mode: Disabled / Enabled

• Power Saving Configurations:

  • S3/Modern Standby Support: S3 Enable / Modern Standby Enable

  • Wake on PME: determines the action when system power is off and PCI enable wake up event occurs. Disabled / Enabled

  • Internal PCIe GPP 0 D3: Disabled / Enabled

    • SOC GPU D3: Disabled / Enabled

    • SOC HD Audio D3: Disabled / Enabled

    • SOC USB3.1 D3: Disabled / Enabled

    • SOC ACP D3: Disabled / Enabled

    • SOC Azalia D3: Disabled / Enabled

  • Internal PCIe GPP 2 D3: Disabled / Enabled

    • SOC USB2.0 D3: Disabled / Enabled

    • SOC USB3.1 for USB4 D3: Disabled / Enabled

    • SOC USB4 D3: Disabled / Enabled

  • Internal USB4 PCIe Tunneling D3: enable internal USB4 PCIe tunneling D3 abd add into PEP Device dependency list. Disabled / Enabled

    • SOC USB4 PCIe Endpoint D3: Disabled / Enabled

  • Unused GPP Clocks Off: Disabled / Enabled

  • Clock PM: CLK_REQ0: Disabled / Enabled

  • Clock PM: CLK_REQ1: Disabled / Enabled

  • Clock PM: CLK_REQ2: Disabled / Enabled

  • Clock PM: CLK_REQ3: Disabled / Enabled

  • Clock PM: CLK_REQ4: Disabled / Enabled

  • Clock PM: CLK_REQ5: Disabled / Enabled

  • Clock PM: CLK_REQ6: Disabled / Enabled

  • Z-states support on non-Z10 capable PCIe: Disabled / Enabled

• Graphics Configurations:

  • EVAL Slot Power Enable: Disabled / Enabled

  • EVAL CARD T-Diode Routing Select: EC / APU SMBUS0

  • D3Cold Support: Disabled / Enabled

  • NVIDIA DGPU Power Enable: Disabled / Enabled

  • Discrete GPU _DSM Function A: Disabled / Enabled

  • Discrete GPU _DSM Function B: Disabled / Enabled

  • Non-Eval Discrete GPU Support: Disabled / Enabled

  • Discrete GPU HPD Circuitry: OR Circuitry / Pulse Circuitry

  • Discrete GPU's Audio: Disabled / Keep ROM Strap Setting

  • Discrete GPU's USB Port: Keep Default Setting / Disabled

  • Discrete GPU's SSID/SVID: Program by Vendor / Keep Default Setting

    • Discrete GPU's VGA SSID/SVID: [manual]

    • Discrete GPU's AUDIO SSID/SVID: [manual]

  • Discrete GPU BOMACO Support: Disabled / Enabled

    • BLINK LED: Disabled / Enabled

  • ATIF Function 23 Support: Disabled / Enabled

  • Primary Video Adaptor: Ext Graphics (PEG) / Int Graphics (IGD)

• Display Configurations:

  • DP0 Select: Default (DP) / DP display / HDMI display

  • DP1 Select: Default (DP) / DP display / HDMI display

    • Adjust DP Caps: Soc Default / Cap override

  • DP2: Default (DP with TypeC) / EDP display / HDMI display / DP with TypeC display / DP without TypeC display

    • Adjust DP Caps: Soc Default / Cap override

  • DP2 Over USBC2: DP with TypeC display / Default (DP with TypeC) / DP without TypeC display

  • DP3/HDMI1/USB6: USB / Default (DP without TypeC) / DP display / HDMI display

• USB/Thunderbolt Configurations:

  • PD USB4 Control Enable/Disable: Disabled / Enabled

  • USB4 Bus Reserved:

  • USB4 Non-Prefetch Memory Reserved: [manual]

  • USB4 non-Prefetch MMIO align (0 ~ 65534 MB): [manual]

  • USB4 Prefetch Memory Reserved: [manual]

  • USB4 Prefetch MMIO align (0 ~ 65534 MB): [manual]

  • USB Camera Enable: Disabled / Enabled

  • USB Finger Printer Enable: Disabled / Enabled

  • UCSI Support: Disabled / Enabled

  • USBC Port Harware Disable Support: Disabled / Enabled

  • Reconfig Rebalance Resources by OS: Disabled / Enabled

  • PD Thunderbolt3 Alt Mode: Disabled / Enabled

  • USB4 ACPI _DEP Support: Disabled / Enabled

• Audio Configurations:

  • Wake On Voice: Disabled / Enabled

  • ACP Power Gating: Disabled / Enabled

  • ACP CLock Gating: Disabled / Enabled

  • SoundWire SSDT Support: Disabled / Enabled

  • TDM2_DIN Pull High: Disabled / Enabled

• I2C Configurations:

  • MITT/WITT Selection: Both disable / WITT Only / MITT Only

• Thermal Configurations:

  • APU PROCHOT# setting:
    Enable APU_PROCHOT# in pure-DC case /
    Disable APU_PROCHOT# /
    Enable APU_PROCHOT# in pure-AC case /
    Enable APU_PROCHOT# in either pure-DC or pure-AC case (not AC+DC)

  • AMD DPTC interface: Disabled / Enabled

  • STT sensor reporting: Disabled / Enabled

• MP2 Configurations:

  • Power Sensors Routing Select: WALLE lite PDT / WALLE lite PM log

  • Turn off Xtal (S3/S5): Disabled / Enabled

  • Sensor Fusion User Mode Driver: Disabled / Enabled

  • Allocate 100KB For MP2: Disabled / Enabled

  • Wake On Human Presence detection WA: Disabled / Enabled

• Debug Configurations:

  • Serial Debug Message Under OS: Disabled / Enabled

  • Debug Print In ASL: Disabled / Enabled

  • iLA TraceMemoryEn: Disabled / Enabled

  • StallForUnlock: Disabled / Enabled

• AMD PMF Settings:

  • AMD PMF Device Support: Disabled / Enabled (opens a list of options)

  • APMF Function 1 Settings:

    • Time interval for PMF to send heartbeat signal to BIOS (seconds): [manual]

  • APMF Function 3 Settings:

    • AMPF Function 3: Disabled / Enabled (opens a list of options)

      • AC_Best_Performance_Limit: [manual]

      • Fan_ID_AC_Best_Performance_Limit: [manual]

      • AC_Better_Performance_Limit: [manual]

      • Fan_ID_AC_Better_Performance_Limit: [manual]

      • AC_Better_Battery_Limit: [manual]

      • Fan_ID_AC_Better_Battery_Limit: [manual]

      • DC_Best_Performance_Limit: [manual]

      • Fan_ID_DC_Best_Performance_Limit: [manual]

      • DC_Better_Performance_Limit: [manual]

      • Fan_ID_DC_Better_Performance_Limit: [manual]

      • DC_Better_Battery_Limit: [manual]

      • Fan_ID_DC_Better_Battery_Limit: [manual]

      • DC_Battery_Saver_Limit: [manual]

      • Fan_ID_DC_Battery_Saver_Limit: [manual]

  • APMF Function 4 Settings: Disabled / Enabled

  • APMF Function 5 Settings: Disabled / Enabled (opens a list of options)

    • T_Balanced_to_Perf : [manual]

    • T_Perf_to_Balanced: [manual]

    • T_Quiet_to_Balanced: [manual]

    • T_Balanced_to_Quiet: [manual]

    • Pfloor_Perf: [manual]

    • Pfloor_Balanced: [manual]

    • Pfloor_Quiet: [manual]

    • P_delta_Balanced_to_Perf: [manual]

    • P_delta_Perf_to_Balanced: [manual]

    • P_delta_Quiet_to_Balanced: [manual]

    • P_delta_Balanced_to_Quiet: [manual]

    • STT_SkinTempLimit_APU_Perf_on_Lap: [manual]

    • STT_SkinTempLimit_HS2_Perf_on_Lap: [manual]

    • STT_SkinTempLimit_APU_Perf: [manual]

    • STT_SkinTempLimit_HS2_Perf: [manual]

    • STT_SkinTempLimit_APU_Balanced: [manual]

    • STT_SkinTempLimit_HS2_Balanced: [manual]

    • STT_SkinTempLimit_APU_Quiet: [manual]

    • STT_SkinTempLimit_HS2: [manual]

    • STTMinLimit_Perf_on_lap: [manual]

    • STTMinLimit_Perf: [manual]

    • STTMinLimit_Balanced: [manual]

    • STTMinLimit_Quiet: [manual]

    • FPPT_Perf_on_lap: [manual]

    • SPPT_Perf_on_lap: [manual]

    • SPL_Perf_on_lap: [manual]

    • SPPT_APUOnly_Perf_on_Lap: [manual]

    • FPPT_Perf: [manual]

    • SPPT_Perf: [manual]

    • SPL_Perf: [manual]

    • SPPT_APUOnly_Perf: [manual]

    • FPPT_Balanced: [manual]

    • SPPT_Balanced: [manual]

    • SPL_Balanced: [manual]

    • SPPT_APUOnly_Balanced: [manual]

    • FPPT_Quiet: [manual]

    • SPPT_Quiet: [manual]

    • SPL_Quiet: [manual]

    • SPPT_APUOnly_Quiet: [manual]

    • Fan_ID_Perf: [manual]

    • Fan_ID_Balanced: [manual]

    • Fan_ID_Quiet: [manual]

  • APMF Function 6 Settings: Disabled / Enabled (opens a list of options)

    • ConditionTemp_In_Bag_Policy: [manual]

    • ConditionTemp_In_Bag_S4_Policy: [manual]

    • FPPT_In_Bag_Policy: [manual]

    • SPPT_In_Bag_Policy: [manual]

    • SPPT_ApuOnly_In_Bag_Policy: [manual]

    • SPL_In_Bag_Policy: [manual]

    • STTMinLimit_In_Bag_Policy: [manual]

    • STT_SkinTempLimit_APU_In_Bag_Policy: [manual]

    • STT_SkinTempLimit_HS2_In_Bag_Policy: [manual]

    • Fan_ID_In_Bag_Policy: [manual]

    • FPPT_In_Bag_Exit_Policy: [manual]

    • SPPT_In_Bag_Exit_Policy: [manual]

    • SPPT_ApuOnly_In_Bag_Exit_Policy: [manual]

    • SPL_In_Bag_Exit_Policy: [manual]

    • STTMinLimit_In_Bag_Exit_Policy: [manual]

    • STT_SkinTempLimit_APU_In_Bag_Exit_Policy: [manual]

    • STT_SkinTempLimit_HS2_In_Bag_Exit_Policy: [manual]

  • APMF Function 9 Settings: Disabled / Enabled (opens a list of options)

    • fPPT_BestPerfAC: [manual]

    • sPPT_BestPerfAC: [manual]

    • sPPT_APUOnlyBestPerfAC: [manual]

    • SPL_BestPerfAC: [manual]

    • STTMinLimit_BestPerfAC: [manual]

    • STT_SkinTempLimit_APU_BestPerfAC: [manual]

    • STT_SkinTempLimit_HS2_BestPerfAC: [manual]

    • Fan_ID_BestPerfAC: [manual]

    • fPPT_BetterPerfAC: [manual]

    • sPPT_BetterPerfAC: [manual]

    • sPPT_APUOnlyBetterPerfAC: [manual]

    • SPL_BetterPerfAC: [manual]

    • STTMinLimit_BetterPerfAC: [manual]

    • STT_SkinTempLimit_APU_BetterPerfAC: [manual]

    • STT_SkinTempLimit_HS2_BetterPerfAC: [manual]

    • Fan_ID_BetterPerfAC: [manual]

    • fPPT_BetterBatteryAC: [manual]

    • sPPT_BetterBatteryAC: [manual]

    • sPPT_APUOnlyBetterBatteryAC: [manual]

    • SPL_BetterBatteryAC: [manual]

    • STTMinLimit_BetterBatteryAC: [manual]

    • SPL_BetterBatteryAC: [manual]

    • STTMinLimit_BetterBatteryAC: [manual]

    • STT_SkinTempLimit_APU_BetterBatteryAC: [manual]

    • STT_SkinTempLimit_HS2_BetterBatteryAC: [manual]

    • Fan_ID_BetterBatteryAC: [manual]

    • fPPT_BestPerfDC: [manual]

    • sPPT_BestPerfDC: [manual]

    • sPPT_APUOnlyBestPerfDC: [manual]

    • SPL_BestPerfDC: [manual]

    • STTMinLimit_BestPerfDC: [manual]

    • STT_SkinTempLimit_APU_BestPerfDC: [manual]

    • STT_SkinTempLimit_HS2_BestPerfDC: [manual]

    • Fan_ID_BestPerfDC: [manual]

    • fPPT_BetterPerfDC: [manual]

    • sPPT_BetterPerfDC: [manual]

    • sPPT_APUOnlyBetterPerfDC: [manual]

    • SPL_BetterPerfDC: [manual]

    • STTMinLimit_BetterPerfDC: [manual]

    • STT_SkinTempLimit_APU_BetterPerfDC: [manual]

    • STT_SkinTempLimit_HS2_BetterPerfDC: [manual]

    • Fan_ID_BetterPerfDC: [manual]

    • fPPT_BetterBatteryDC: [manual]

    • sPPT_BetterBatteryDC: [manual]

    • sPPT_APUOnlyBetterBatteryDC: [manual]

    • SPL_BetterBatteryDC: [manual]

    • STTMinLimit_BetterBatteryDC: [manual]

    • STT_SkinTempLimit_APU_BetterBatteryDC: [manual]

    • STT_SkinTempLimit_HS2_BetterBatteryDC: [manual]

    • Fan_ID_BetterBatteryDC: [manual]

    • fPPT_BatterySaverDC: [manual]

    • sPPT_BatterySaverDC: [manual]

    • sPPT_APUOnlyBetterBatteryDC: [manual]

    • SPL_BatterySaverDC: [manual]

    • STTMinLimit_BatterySaverDC: [manual]

    • STT_SkinTempLimit_APU_QuietBatterySaverDC: [manual]

    • STT_SkinTempLimit_HS2_BatterySaverDC: [manual]

  • APMF Function 11 Settings: Disabled / Enabled: [manual]

    STTMinLimit

    (opens a list of options)

    • T_Perf_onto_lapTurbo: [manual]

    • STTMinLimitT_Balanced_to_Perf: [manual]STTMinLimit

    • T_Quiet_to_Balanced: [manual]

    • STTMinLimitT_Balanced_to_Quiet: [manual]

    • FPPTT_Perf_onto_lapBalanced: [manual]SPPT

    • T_PerfTurbo_onto_lapPerf: [manual]SPL_Perf_on_lap

    • Pfloor_Turbo: [manual]SPPT

    • _APUOnly_Perf_on_LapFPPT_Turbo: [manual]

    • FPPTSPPT_PerfTurbo: [manual]

    • SPPT_APUOnly_PerfTurbo: [manual]

    • SPL_PerfTurbo: [manual]SPPT

    • STT_APUOnlyMinLimit_PerfTurbo: [manual]

    • FPPTSTT_SkinTempAPU_BalancedTurbo: [manual]SPPT

    • STT_SkinTempHS2_BalancedTurbo: [manual]SPL

    • Fan_ID_BalancedTurbo: [manual]SPPT

    • Pfloor_APUOnly_BalancedPerformance: [manual]

    • FPPT_QuietPerformance: [manual]

    • SPPT_QuietPerformance: [manual]SPL

    • SPPT_APUOnly_QuietPerformance: [manual]SPPT

    • SPL_APUOnly_QuietPerformance: [manual]

    • FanSTT_IDMinLimit_PerfPerformance: [manual]Fan

    • STT_IDSkinTempAPU_BalancedPerformance: [manual]Fan

    • STT_IDSkinTempHS2_QuietPerformance: [manual]

    APMF Function 6 Settings: Disabled / Enabled (opens a list of options)

    • ConditionTemp_In_Bag_PolicyFan_ID_Performance: [manual]ConditionTemp_In_Bag_S4_Policy

    • Pfloor_Balanced: [manual]

    • FPPT_In_Bag_PolicyBalanced: [manual]

    • SPPT_In_Bag_PolicyBalanced: [manual]

    • SPPT_ApuOnly_In_Bag_PolicyAPUOnly_Balanced: [manual]

    • SPL_In_Bag_PolicyBalanced: [manual]STTMinLimit

    • STT_InMinLimit_Bag_PolicyBalanced: [manual]

    • STT_SkinTempLimit_APU_In_Bag_PolicySkinTempAPU_Balanced: [manual]

    • STT_SkinTempLimit_HS2_In_Bag_PolicySkinTempHS2_Balanced: [manual]

    • Fan_ID_In_Bag_PolicyBalanced: [manual]

    • Pfloor_Quiet: [manual]

    • FPPT_In_Bag_Exit_PolicyQuiet: [manual]

    • SPPT_In_Bag_Exit_PolicyQuiet: [manual]

    • SPPT_ApuOnly_In_Bag_Exit_PolicyAPUOnly_Quiet: [manual]

    • SPL_In_Bag_Exit_PolicyQuiet: [manual]STTMinLimit

    • STT_In_Bag_Exit_PolicyMinLimit_Quiet: [manual]

    • STT_SkinTempLimit_APU_In_Bag_Exit_PolicySkinTempAPU_Quiet: [manual]STT_SkinTempLimit_HS2_In_Bag_Exit_Policy

    • STT_SkinTempHS2_Quiet: [manual]

  • APMF Function 9 12 Settings: Disabled / Enabled (opens a list of options)

    • fPPT_BestPerfACFlags: [manual]sPPT_BestPerfAC

    • T_Perf_to_Turbo: [manual]sPPT

    • _APUOnlyBestPerfACT_Balanced_to_Perf: [manual]

    • SPL_BestPerfACT_Quiet_to_Balanced: [manual]STTMinLimit_BestPerfAC

    • T_Balanced_to_Quiet: [manual]

    • STTT_SkinTempLimitPerf_APUto_BestPerfACBalanced: [manual]STT

    • T_SkinTempLimitTurbo_HS2to_BestPerfACPerf: [manual]

    • FanPfloor_ID_BestPerfACTurbo: [manual]

    • fPPTFPPT_BetterPerfACTurbo: [manual]sPPT

    • SPPT_BetterPerfACTurbo: [manual]sPPT

    • SPPT_APUOnly_APUOnlyBetterPerfACTurbo: [manual]

    • SPL_BetterPerfACTurbo: [manual]STTMinLimit

    • STT_MinLimit_BetterPerfACTurbo: [manual]

    • STT_SkinTempLimitSkinTempAPU_APU_BetterPerfACTurbo: [manual]

    • STT_SkinTempLimitSkinTempHS2_HS2_BetterPerfACTurbo: [manual]

    • Fan_ID_BetterPerfACTurbo: [manual]

    • fPPTPfloor_BetterBatteryACPerformance: [manual]sPPT

    • FPPT_BetterBatteryACPerformance: [manual]

    • sPPTSPPT_APUOnlyBetterBatteryACPerformance: [manual]

    • SPL_BetterBatteryAC: [manual]

    • STTMinLimit_BetterBatteryACSPPT_APUOnly_Performance: [manual]

    • SPL_BetterBatteryACPerformance: [manual]STTMinLimit

    • STT_MinLimit_BetterBatteryACPerformance: [manual]

    • STT_SkinTempLimit_APU_BetterBatteryACSkinTempAPU_Performancev

    • STT_SkinTempHS2_Performance: [manual]STT

    • Fan_SkinTempLimitID_HS2_BetterBatteryACPerformance: [manual]Fan

    • Pfloor_ID_BetterBatteryACBalanced: [manual]

    • fPPTFPPT_BestPerfDCBalanced: [manual]sPPT

    • SPPT_BestPerfDCBalanced: [manual]sPPT

    • SPPT_APUOnly_APUOnlyBestPerfDCBalanced: [manual]

    • SPL_BestPerfDCBalanced: [manual]STTMinLimit

    • STT_MinLimit_BestPerfDCBalanced: [manual]

    • STT_SkinTempLimitSkinTempAPU_APU_BestPerfDCBalanced: [manual]

    • STT_SkinTempLimitSkinTempHS2_HS2_BestPerfDCBalanced: [manual]

    • Fan_ID_BestPerfDC_Balanced: [manual]

    • Pfloor_Quiet: [manual]

    • fPPTFPPT_BetterPerfDCQuiet: [manual]sPPT

    • SPPT_BetterPerfDCQuiet: [manual]sPPT

    • SPPT_APUOnly_APUOnlyBetterPerfDCQuiet: [manual]

    • SPL_BetterPerfDCQuiet: [manual]STTMinLimit

    • STT_MinLimit_BetterPerfDCQuiet: [manual]

    • STT_SkinTempLimit_APU_BetterPerfDCSkinTempAPU_Quiet: [manual]

    • STT_SkinTempHS2_Quiet: [manual]STT_SkinTempLimit_HS2_BetterPerfDC

  • APMF Function 13 Settings: Disabled / Enabled (opens a list opf options)

    • T_Balanced_to_Perf: [manual]

    • FanT_Perf_IDto_BetterPerfDCBalanced: [manual]

    • fPPT_BetterBatteryDCT_Quiet_to_Balanced: [manual]sPPT_BetterBatteryDC

    • T_Balanced_to_Quiet: [manual]

    • sPPTPfloor_APUOnlyBetterBatteryDCPerf: [manual]

    • SPLPfloor_BetterBatteryDCBalanced: [manual]STTMinLimit

    • Pfloor_BetterBatteryDCQuiet: [manual]STT

    • P_delta_SkinTempLimitBalanced_APUto_BetterBatteryDCPerf: [manual]STT

    • P_delta_SkinTempLimitPerf_HS2to_BetterBatteryDCBalanced: [manual]Fan_ID_

    • BetterBatteryDCP_delta_Quiet_to_Balanced: [manual]

    • fPPT_BatterySaverDC: [manual]

    • sPPT_BatterySaverDC: [manual]

    • sPPT_APUOnlyBetterBatteryDCP_delta_Balanced_to_Quiet: [manual]

    • SPL_BatterySaverDCSTT_SkinTempLimit_APU_Perf_on_Lap: [manual]STTMinLimit_BatterySaverDC

    • STT_SkinTempLimit_HS2_Perf_on_Lap: [manual]

    • STT_SkinTempLimit_APU_BatterySaverDCPerf: [manual]

    • STT_SkinTempLimit_HS2_BatterySaverDCPerf: [manual]

    APMF Function 11 Settings: Disabled / Enabled

    • STT_SkinTempLimit_APU_Balanced: [manual]

    (opens a list of options)

    • T_Perf_to_Turbo

    • STT_SkinTempLimit_HS2_Balanced: [manual]

    • TSTT_BalancedSkinTempLimit_toAPU_PerfQuiet: [manual]T

    • STT_QuietSkinTempLimit_to_BalancedHS2: [manual]T

    • STTMinLimit_BalancedPerf_toon_Quietlap: [manual]T

    • STTMinLimit_Perf_to_Balanced: [manual]T_Turbo_to_

    • PerfSTTMinLimit_Balanced: [manual]

    • PfloorSTTMinLimit_TurboQuiet: [manual]

    • FPPT_Perf_Turboon_lap: [manual]

    • SPPT_Perf_on_Turbolap: [manual]SPPT

    • SPL_Perf_APUOnlyon_Turbolap: [manual]SPL_Turbo

    • SPPT_APUOnly_Perf_on_Lap: [manual]

    • STTFPPT_MinLimit_TurboPerf: [manual]STT

    • SPPT_SkinTempAPU_TurboPerf: [manual]STT

    • SPL_SkinTempHS2_TurboPerf: [manual]Fan

    • SPPT_IDAPUOnly_TurboPerf: [manual]

    • PfloorFPPT_PerformanceBalanced: [manual]FPPT

    • SPPT_PerformanceBalanced: [manual]SPPT

    • SPL_PerformanceBalanced: [manual]

    • SPPT_APUOnly_PerformanceBalanced: [manual]SPL

    • FPPT_PerformanceQuiet: [manual]STT_

    • MinLimitSPPT_PerformanceQuiet: [manual]STT

    • SPL_SkinTempAPU_PerformanceQuiet: [manual]STT

    • SPPT_SkinTempHS2APUOnly_PerformanceQuiet: [manual]

    • Fan_ID_PerformancePerf: [manual]

    • PfloorFan_ID_Balanced: [manual]

    • FPPT_Balanced: [manual]

    • SPPT_Balanced

  • APMF Function 14 Settings: Disabled / Enabled

• RAS:

  • PCIe Root Port Corr Err Mask Reg: [manual]

  • SPPT_APUOnly_Balanced

    PCIe Root Port UnCorr Err Mask Reg: [manual]

    SPL_Balanced

  • Pcie Port UnCorr Error Sev Reg: [manual]

  • STT_MinLimit_Balanced

    PCIe Device Corr Err Mask Reg: [manual]

    STT_SkinTempAPU_Balanced

  • PCIe Device UnCorr Err Mask Reg: [manual]

  • STT_SkinTempHS2_Balanced

    Pcie Device UnCorr Error Sev Reg: [manual]

  • Fan_ID_Balanced: [manual]

  • Pfloor_Quiet: [manual]

  • FPPT_Quiet: [manual]

  • SPPT_Quiet: [manual]

  • SPPT_APUOnly_Quiet: [manual]

  • SPL_Quiet: [manual]

  • STT_MinLimit_Quiet: [manual]

  • STT_SkinTempAPU_Quiet: [manual]

  • STT_SkinTempHS2_Quiet: [manual]

  • APMF Function 12 Settings: Disabled / Enabled (opens a list of options)

    • Flags: [manual]

    • T_Perf_to_Turbo: [manual]

    • T_Balanced_to_Perf: [manual]

    • T_Quiet_to_Balanced: [manual]

    • T_Balanced_to_Quiet: [manual]

    • T_Perf_to_Balanced: [manual]

    • T_Turbo_to_Perf: [manual]

    • Pfloor_Turbo: [manual]

    • FPPT_Turbo: [manual]

    • SPPT_Turbo: [manual]

    • SPPT_APUOnly_Turbo: [manual]

    • SPL_Turbo: [manual]

    • STT_MinLimit_Turbo: [manual]

    • STT_SkinTempAPU_Turbo: [manual]

    • STT_SkinTempHS2_Turbo: [manual]

    • Fan_ID_Turbo: [manual]

    • Pfloor_Performance: [manual]

    • FPPT_Performance: [manual]

    • SPPT_Performance: [manual]

    • SPPT_APUOnly_Performance: [manual]

    • SPL_Performance: [manual]

    • STT_MinLimit_Performance: [manual]

    • STT_SkinTempAPU_Performancev

    • STT_SkinTempHS2_Performance: [manual]

    • Fan_ID_Performance: [manual]

    • Pfloor_Balanced: [manual]

    • FPPT_Balanced: [manual]

    • SPPT_Balanced: [manual]

    • SPPT_APUOnly_Balanced: [manual]

    • SPL_Balanced: [manual]

    • STT_MinLimit_Balanced: [manual]

    • STT_SkinTempAPU_Balanced: [manual]

    • STT_SkinTempHS2_Balanced: [manual]

    • Fan_ID_Balanced: [manual]

    • Pfloor_Quiet: [manual]

    • FPPT_Quiet: [manual]

    • SPPT_Quiet: [manual]

    • SPPT_APUOnly_Quiet: [manual]

    • SPL_Quiet: [manual]

    • STT_MinLimit_Quiet: [manual]

    • STT_SkinTempAPU_Quiet: [manual]

    • STT_SkinTempHS2_Quiet: [manual]

  • APMF Function 13 Settings: Disabled / Enabled (opens a list opf options)

    • T_Balanced_to_Perf: [manual]

    • T_Perf_to_Balanced: [manual]

    • T_Quiet_to_Balanced: [manual]

    • T_Balanced_to_Quiet: [manual]

    • Pfloor_Perf: [manual]

    • Pfloor_Balanced: [manual]

    • Pfloor_Quiet: [manual]

    • P_delta_Balanced_to_Perf: [manual]

    • P_delta_Perf_to_Balanced: [manual]

    • P_delta_Quiet_to_Balanced: [manual]

    • P_delta_Balanced_to_Quiet: [manual]

    • STT_SkinTempLimit_APU_Perf_on_Lap: [manual]

    • STT_SkinTempLimit_HS2_Perf_on_Lap: [manual]

    • STT_SkinTempLimit_APU_Perf: [manual]

    • STT_SkinTempLimit_HS2_Perf: [manual]

    • STT_SkinTempLimit_APU_Balanced: [manual]

    • STT_SkinTempLimit_HS2_Balanced: [manual]

    • STT_SkinTempLimit_APU_Quiet: [manual]

    • STT_SkinTempLimit_HS2: [manual]

    • STTMinLimit_Perf_on_lap: [manual]

    • STTMinLimit_Perf: [manual]

    • STTMinLimit_Balanced: [manual]

    • STTMinLimit_Quiet: [manual]

    • FPPT_Perf_on_lap: [manual]

    • SPPT_Perf_on_lap: [manual]

    • SPL_Perf_on_lap: [manual]

    • SPPT_APUOnly_Perf_on_Lap: [manual]

    • FPPT_Perf: [manual]

    • SPPT_Perf: [manual]

    • SPL_Perf: [manual]

    • SPPT_APUOnly_Perf: [manual]

    • FPPT_Balanced: [manual]

    • SPPT_Balanced: [manual]

    • SPL_Balanced: [manual]

    • SPPT_APUOnly_Balanced: [manual]

    • FPPT_Quiet: [manual]

    • SPPT_Quiet: [manual]

    • SPL_Quiet: [manual]

    • SPPT_APUOnly_Quiet: [manual]

    • Fan_ID_Perf: [manual]

    • Fan_ID_Balanced: [manual]

  • APMF Function 14 Settings: Disabled / Enabled

• RAS:

  • PCIe Root Port Corr Err Mask Reg: [manual]

  • PCIe Root Port UnCorr Err Mask Reg: [manual]

  • Pcie Port UnCorr Error Sev Reg: [manual]

  • PCIe Device Corr Err Mask Reg: [manual]

  • PCIe Device UnCorr Err Mask Reg: [manual]

  • Pcie Device UnCorr Error Sev Reg: [manual]

• Above 4GB MMIO Limit:
  35bit (32GB)
  36bit (64GB)
  37bit (128GB)
  38bit (256GB)
  39bit (512GB)
  40bit (1TB) default
  41bit (2TB)
  42bit (4TB)
  43bit (8TB)
  44bit (16TB)
  45bit (32TB)
  46bit (64TB)
  47bit (128TB)
  48bit (256TB)

• 5V_S5 voltage: 5v_ALW(default) / 5v_ALW +60mv / 5v_ALW +100mv

• AMD KVM Mouse Protocol: Auto(default) / Simple / Absolute

• Processor Aggregator Device: Disabled / Enabled

• APIC Software Enable: Disabled / Enabled

• Dynamic P3T limit: Enable for DC-only case (include fake DC) / Disabled / Enabled

• PD Firmware Update: Disabled / Enabled

• CPU Common Options:

  • Prefetcher settings:

    • L1 Stream HW Prefetcher: Auto / Disabled / Enabled

    • 2 Stream HW Prefetcher: Auto / Disabled / Enabled

  • Core Watchdog:

  • Core Watchdog Timer Enable: Disabled / Enabled (opens more options)

    • Core Watchdog Timer Interval: Auto / 21.461s - 39us

    • Core Watchdog Timer Severity:
      Auto
      Fatal
      Uncorrected
      Deferred
      Corrected
      Transparent
      No Error

  • CCD/Core/Thread Enablement:

    • Core control: Auto / ONE / TWO / THREE / FOUR / FIVE / SIX / SEVEN

  • RedirectForReturnDis: Auto / 0 / 1

  • Core Performance Boost: Auto / Disabled

  • lobal C-state Control: Auto / Disabled / Enabled

  • Opcache Control: Auto / Disabled / Enabled

  • SEV ASID Count: Auto / 253 ASIDs / 509 ASIDs

  • SEV-ES ASID Space Limit Control: Auto / manual (opens another option)

    • SEV-ES ASID Space Limit: [manual]

  • Streaming Stores Control: Auto / Disabled / Enabled

  • Local APIC Mode: Auto / xAPIC / x2APIC

  • ACPI _CST C1 Declaration: Auto / Disabled / Enabled

  • MCA error thresh enable: True / False

  • MCA error thresh count: FF5 (default) [manual]

  • SMU and PSP Debug Mode: Auto / Disabled / Enabled

  • PPIN Opt-in: Auto / Disabled / Enabled

  • Action on BIST Failure: Auto / Down-Core / Do nothing

  • IBS hardware workaround: Auto / Down-Core / Do nothing

• DF Common Options:

  • Scrubber:

    • DRAM scrub time(hours): Auto / Disabled / 1h / 4h / 8h / 16h / 24h / 48h

    • Poison scrubber control: Auto / Disabled / Enabled

    • Redirect scrubber control: Auto / Disabled / Enabled

    • Redirect scrubber limit: Auto / Infinite / 2 / 4 / 8

    • DRAM map inversion: Auto / Disabled / Enabled

  • Memory Addressing:

    • Memory interleaving size: Auto / 256 Bytes / 512 Bytes / 1 KB / 2 KB

  • CC6 memory region encryption: Auto / Disabled / Enabled

  • Memory Clear: Auto / Disabled / Enabled

  • Disable DF to external downstream IP SyncFloodPropagation: Auto / Sync flood enabled / Sync flood disabled

  • Disable DF sync flood propagation: Auto / Sync flood enabled / Sync flood disabled

  • Freeze DF module queues on error: Auto / Disabled / Enabled

  • DF Cstates: Auto / Disabled / Enabled

• UMC Common Options:

• NBIO Common Options:

• FCH Common Options:Above 4GB MMIO Limit:
  35bit (32GB)
  36bit (64GB)
  37bit (128GB)
  38bit (256GB)
  39bit (512GB)
  40bit (1TB) default
  41bit (2TB)
  42bit (4TB)
  43bit (8TB)
  44bit (16TB)
  45bit (32TB)
  46bit (64TB)
  47bit (128TB)
  48bit (256TB)

• 5V_S5 voltage: 5v_ALW(default) / 5v_ALW +60mv / 5v_ALW +100mv

• AMD KVM Mouse Protocol: Auto(default) / Simple / Absolute

• Processor Aggregator Device: Disabled / Enabled

• APIC Software Enable: Disabled / Enabled

• Dynamic P3T limit: Enable for DC-only case (include fake DC) / Disabled / Enabled

• PD Firmware Update: Disabled / Enabled

• CPU Common Options:

  • Prefetcher settings:

    • L1 Stream HW Prefetcher: Auto / Disabled / Enabled

    • 2 Stream HW Prefetcher: Auto / Disabled / Enabled

  • Core Watchdog:

  • Core Watchdog Timer Enable: Disabled / Enabled (opens more options)

    • Core Watchdog Timer Interval: Auto / 21.461s - 39us

    • Core Watchdog Timer Severity:
      Auto
      Fatal
      Uncorrected
      Deferred
      Corrected
      Transparent
      No Error

  • CCD/Core/Thread Enablement:

    • Core control: Auto / ONE / TWO / THREE / FOUR / FIVE / SIX / SEVEN

  • RedirectForReturnDis: Auto / 0 / 1

  • Core Performance Boost: Auto / Disabled

  • lobal C-state Control: Auto / Disabled / Enabled

  • Opcache Control: Auto / Disabled / Enabled

  • SEV ASID Count: Auto / 253 ASIDs / 509 ASIDs

  • SEV-ES ASID Space Limit Control: Auto / manual (opens another option)

    • SEV-ES ASID Space Limit: [manual]

  • Streaming Stores Control: Auto / Disabled / Enabled

  • Local APIC Mode: Auto / xAPIC / x2APIC

  • ACPI _CST C1 Declaration: Auto / Disabled / Enabled

  • MCA error thresh enable: True / False

  • MCA error thresh count: FF5 (default) [manual]

  • SMU and PSP Debug Mode: Auto / Disabled / Enabled

  • PPIN Opt-in: Auto / Disabled / Enabled

  • Action on BIST Failure: Auto / Down-Core / Do nothing

  • IBS hardware workaround: Auto / Down-Core / Do nothing

• DF Common Options:

  • Scrubber:

    • DRAM scrub time(hours): Auto / Disabled / 1h / 4h / 8h / 16h / 24h / 48h

    • Poison scrubber control: Auto / Disabled / Enabled

    • Redirect scrubber control: Auto / Disabled / Enabled

    • Redirect scrubber limit: Auto / Infinite / 2 / 4 / 8

    • DRAM map inversion: Auto / Disabled / Enabled

  • Memory Addressing:

    • Memory interleaving size: Auto / 256 Bytes / 512 Bytes / 1 KB / 2 KB

  • CC6 memory region encryption: Auto / Disabled / Enabled

  • Memory Clear: Auto / Disabled / Enabled

  • Disable DF to external downstream IP SyncFloodPropagation: Auto / Sync flood enabled / Sync flood disabled

  • Disable DF sync flood propagation: Auto / Sync flood enabled / Sync flood disabled

  • Freeze DF module queues on error: Auto / Disabled / Enabled

  • DF Cstates: Auto / Disabled / Enabled

• UMC Common Options:

  • DDR Options:

    • DDR RAS:

      • Disable Memory Error Injection: Auto / False / True

      • Data Poisoning: Auto / Disabled / Enabled

      • DR ECC Configuration:

        • ECC: Auto / Disabled / Enabled

    • DDR Security:

      • TSME: Auto / Disabled / Enabled

      • Data Scramble: Auto / Disabled / Enabled

    • DDR Addressing Options:

      • Chipselect Interleaving: Auto / Disabled

      • Address Hash Bank: Auto / Disabled / Enabled

      • Address Hash CS: Auto / Disabled / Enabled

      • BankSwapMode: Auto / Disabled / Swap APU

    • DDR Training Options:

      • DFE Read Training: Auto / Disabled / Enabled

      • DRAM PDA Enumerate ID Programming Mode: Auto / Toggling PDA enumeration mode / Legacy PDA enumeration mode

    • DDR Memory MBIST:

      • MBIST Enable: Auto / Disabled / Enable (opens more options)

        • MBIST Test Mode: Auto / Both / Data Eye Mode / Interface Mode

        • MBIST Aggressors: Auto / Disabled / Enabled

        • MBIST Per Bit Slave Die Reporting: Auto / Disabled / Enabled

        • DDR Data Eye:

          • Pattern Select: PRBS / SSO / Both

          • Pattern Length: [manual] (default 6)

          • Aggressor Channel: Disabled / 1 Aggressor Channel / 3 Aggressor Channels /
            7 Aggressor Channel

• NBIO Common Options:

  • IOMMU: Auto / Disabled / Enabled

  • PCIe ARI Support: Auto / Disabled / Enabled

  • Enable AER Cap: Auto / Disabled / Enabled

  • ACS Enable: Auto / Disabled / Enabled

  • PSPP Policy: Auto / Disabled / Enabled

  • GFX Configuration:

    • iGPU Configuration: Auto / iGPU Disabled / UMA_SPECIFIED / UMA_AUTO / UMA_GAME_OPTIMIZED

    • UMA Version: Auto / Non-Legacy / Legacy

    • GPU Host Translation Cache: Auto / Disabled / Enabled

  • Audio Configuration:

    • NB Azalia: Auto / Disabled / Enabled

    • Audio IOs:
      options:
      Auto
      HDA(3SDI) + PDM(2CH)
      HDA(1SDI) + PDM(6CH)
      DA(1SDI) + SDW0(1MDATA) + PDM(2CH)
      SDW0(4MDATA) + PDM(6CH)
      SDW0(4MDATA) + SDW1(1MDATA) + PDM(2CH)
      3I2S PORTS + 1 REFCLK + 1 INTR
      HDA(3SDI) + PDM(6CH) +I2S
      HDA(3SDI) + PDM(8CH)
      HDA(1SDI) + SDW0(1MDATA) + PDM(6CH) + I2S
      SDW0(4MDATA)+ SDW1(1MDATA) + PDM(6CH) + I2S
      SDW0(4MDATA) + SDW1(1MDATA)+ PDM(8CH)

• FCH Common Options:

  • I3C/I2C Configuration Options:

    • I3C/I2C 0 Enable: Auto / I2C Enabled / I3C Enabled / Both Disabled

    • I3C/I2C 1 Enable: Auto / I2C Enabled / I3C Enabled / Both Disabled

    • I3C/I2C 2 Enable: Auto / I2C Enabled / I3C Enabled / Both Disabled

    • I3C/I2C 3 Enable: Auto / I2C Enabled / I3C Enabled / Both Disabled

  • SATA Configuration Options:

    • SATA Controller: Auto / Disabled / Enabled

    • SATA Auto Shutdown: Auto / Disabled / Enabled

    • Sata RAS Support: Auto / Disabled / Enabled

    • Sata Disabled AHCI Prefetch Function: Auto / Disabled / Enabled

    • Aggresive SATA Device Sleep Port 0: Auto / Disabled / Enabled

    • Aggresive SATA Device Sleep Port 1: Auto / Disabled / Enabled

  • USB Configuration Options:

    • USB0 controller enable: Auto / Disabled / Enabled

    • USB1 controller enable: Auto / Disabled / Enabled

    • USB2 controller enable: Auto / Disabled / Enabled

    • USB0 2.0 port enable:

      • USB0 2.0 Port 0: Auto / Disabled / Enabled

      • USB0 2.0 Port 1: Auto / Disabled / Enabled

      • USB0 2.0 Port 2: Auto / Disabled / Enabled

      • USB0 2.0 Port 3: Auto / Disabled / Enabled

    • USB1 2.0 port enable:

      • USB1 2.0 Port 0: Auto / Disabled / Enabled

      • USB1 2.0 Port 1: Auto / Disabled / Enabled

      • USB1 2.0 Port 2: Auto / Disabled / Enabled

    • USB2 2.0 port enable: Auto / Disabled / Enabled

    • USB3 2.0 port enable: Auto / Disabled / Enabled

    • USB4 2.0 port enable: Auto / Disabled / Enabled

    • USB0 3.1 port enable:

      • USB0 3.1 Port 0: Auto / Disabled / Enabled

      • USB0 3.1 Port 1: Auto / Disabled / Enabled

    • USB1 3.1 port enable: Auto / Disabled / Enabled

      • USB1 3.1 Port 0: Auto / Disabled / Enabled

      • USB1 3.1 Port 1: Auto / Disabled / Enabled

    • USB3 3.1 port enable: Auto / Disabled / Enabled

    • USB4 3.1 port enable: Auto / Disabled / Enabled

  • Ac Power Loss Options:

    • Ac Loss Control: Always On(recommended) / Always Off / Reserved / Previous / Auto

  • Uart Configuration Options:

    • Uart 0 Enable: Auto / Disabled / Enabled

    • Uart 1 Enable (no HW FC): Auto / Disabled / Enabled

    • Uart 2 Enable: Auto / Disabled / Enabled

    • Uart 3 Enable (no HW FC): Auto / Disabled / Enabled

    • Uart 4 Enable: Auto / Disabled / Enabled

  • ESPI Configuration Options: Auto / Disabled / Enabled

  • XGBE Configuration Options:

  • XGBE0 enable: Auto / Disabled / Enabled

  • XGBE1 enable: Auto / Disabled / Enabled

  • USB4 Configuration Options:

    • USB4 pre-CM Enable: Auto / Disabled / Enabled

    • USB4 RT0:

      • RT0 Router Enable: Auto / Disabled / Enabled (opens another option)

      • RT0 PCIe Tunnel: Auto / Disabled / Enabled

    • USB4 RT1:

      • RT1 Router Enable: Auto / Disabled / Enabled (opens another option)

      • RT1 PCIe Tunnel: Auto / Disabled / Enabled

  • SPI Configuration Options:

    • HFP Enable: Auto / Disabled / Enabled

    • HID Enable: Auto / Disabled / Enabled

    • HID2 Enable: Auto / Disabled / Enabled

• SMU Common Options:

  • System Configuration (TDP): Auto / 10W / 15W / 25W / 35W / 45W / 54W

  • Sustained Power Limit: [manual]

  • PPT Control: Auto / Manual (opens manual value input option)

  • STAPM Control: Auto / Manual (opens manual value input option)

  • Thermal Control: Auto / Manual (opens manual value input option)

  • TDC Control: Auto / Manual (opens manual value input option)

  • EDC Control: Auto / Manual (opens manual value input option)

  • PSI3 Control: Auto / Manual (opens manual value input option)

  • PROCHOT Control: Auto / Manual (opens manual value input option)

  • STT Control: Auto / Manual (opens manual value input option)

  • Fan Control: Auto / Manual (opens manual value input option)

  • VDDP Voltage Control: Auto / Manual (opens manual value input option)

  • VDDM Voltage Control: Auto / Manual (opens manual value input option)

  • SmartShift Control:

    • SmartShift Control: Auto / Manual(opens more options)

      • SmartShift Enable: Auto / Disabled / Enabled

      • APU Only sPPT Limit: [manual]

      • Sustained PowerLimit: [manual]

      • Fast PPT Limit: [manual]

      • Slow PPT Limit: [manual]

  • Zstates (Z9 and Z10): Auto / Disabled / Enabled

• SOC Miscellaneous Control:

  • PSP RPMC Switch: Auto / Disabled / Enabled

  • Firmware Anti-rollback (FAR):

    • Initial SPL value for FAR: [manual]

    • FAR Switch: Disabled / Enabled

  • Rom Armor support: Auto / Disabled / Enabled

  • ABL Console Out Control: Auto / Disabled / Enabled

  • Secured-core Auto enablement: Auto / Disabled / Enabled

  • Pluton (HSP) Options:

    • Pluton (HSP) X86 Firmware Support: Auto / Disabled / Enabled

    • Pluton (HSP) UART: Auto / Disabled / Enabled

    • Pluton (HSP) FIPS: Auto / Disabled / Enabled

    • Pluton (HSP) ACPI Fence Enable: Auto / True / False

  • AIM-T Options:

    • AGESA MPM support:

      • KVM for Wired Manageability: Auto / Disabled / Enabled

      • Wireless Manageability: Auto / Disabled / Enabled (opens more options)

        • KVM for Wireless Manageability: Auto / Disabled / Enabled

        • TCR for Wireless Manageability: Auto / Disabled / Enabled

  • Intrusion Detection:

    • Intrusion Detection settings: [manual] requires password to show settings

  • Mixed DIMM config extended NUMA domain: Auto / Disabled / Enabled