...
| Info |
|---|
The 3D model is for integration. It is accurate externally , with no internal features. |
Installation notes
Orientation
Bedrock 30W and Bedrock 60W should be installed in vertical position with at least 2 cm clearance below and above for airflow.
| Info |
|---|
Other mounting orientation can be considered with active cooling. |
Bedrock Tile should have at least one of the walls thermally coupled to a cold plate.
Mounting notes
Rear panel: 2x M3 threadings. Depth 3mm
Rear panel can be used with
Bedrock wall mounting bracket
Bedrock DIN rail bracket
Custom mounting fixture
...
Bottom panel: 2x M4 threadings, depth 6mm
Bottom panel should not be used for direct mounting, but can be used with Bedrock foot.
...
Tile: 6x M4 threadings depth 3.5 mm on each wall
The threaded holes are intended for easy attachment to a cold plate for conduction cooling. Either of the walls can be attached at any orientation.
It is also possible to attach using another fixture e.g. a custom omega bracket.
It is advised to apply thermal interface material between wall and cold plate on the entire wall area.
...