...
Insert a SIM with NO PIN in the system and reboot. The automatic SIM detection feature is not enabled. If your SIM card is protected by a PIN code, see how to unlock it via the Controlling and accessing the modem and GPS . You can then configure the PIN code in the service configuration file.
Set the eth0 as a LAN interface instead of WAN. Only 1 WAN interface can exist
On the ppp0 (or 2-2.1) page
Set the Status as Enabled for WAN
Configure the Cellular with the APN info corresponding to the info given by your operator. Here are the fields that must be configured (see screenshot below)
Dial string that shall be: atd*99**<pdp context num># ex: ‘atd*99**1#‘
...
Modem troubleshooting: if the connection via cellular is not coming up, more explanations and troubleshooting tips in Controlling and accessing the modem and GPS .
SIM Format
Here are the format supported by the gateway models
...
Contact your SolidRun representative to obtain your account and credentials for the gateways and users into Kapua. (SolidSense Support Overview )
...