To control on the GPIO pins:
...
Example: to calculate the GPIO number of pin header ####
Pad Name :
GPIO Bank = #######
GPIO bit = #######
XX = ##############
Attached here the header schematics
...
Header Pin | Pad Name | GPIO name | Linux GPIO number |
|---|---|---|---|
J2 [pin 1] | 3.3V | # | |
J2 [pin 2] | 5V | # | |
J2 [pin 3] | I2C_SDA | # | |
J2 [pin 4] | 5V | # | |
J2 [pin 5] | I2C_SCL | # | |
J2 [pin 6] | GND | # | |
J2 [pin 7] | GPIO 1 | # | |
J2 [pin 8] | UART TX | # | |
J2 [pin 9] | GND | # | |
J2 [pin 10] | UART RX | # | |
J2 [pin 12] | GPIO 72 | # | |
J2 [pin 13] | GPIO 71 | # | |
J2 [pin 14] | GND | # | |
J2 [pin 15] | GPIO 10 | # | |
J2 [pin 16] | GPIO 194* | # | |
J2 [pin 17] | 3.3V | # | |
J2 [pin 18] | GPIO 195* | # | |
J2 [pin 19] | SPI_MOSI | # | |
J2 [pin 20] | GND | # | |
J2 [pin 21] | SPI_MISO | # | |
J2 [pin 22] | GPIO 67 | # | |
J2 [pin 23] | SPI_SCLK | # | |
J2 [pin 24] | ECSPI2_SS0 | # | |
J2 [pin 25] | GND | # | |
J2 [pin 26] | ECSPI2_SS1 | # |