This guide contains tips and resources for a quick start with IMX8MP HummingBoard Pro and Hailo-8 AI accelerator.
...
To start the IMX.8 HummingBoard Pro with Hailo-8, download the prebuilt demo image or build the demo image from the sources.
...
For more information, please visit Flashing an SD Card.
Note: Plug a micro SD into your Linux PC, the following assumes that the micro SD is added as /dev/sdX and all its partitions are unmounted.
...
Before powering up the board for the first time, it is recommended to select the boot media. To configure the boot media, please refer to HummingBoard Pulse and Ripple Boot Select.
Here is the correct DIP switch position for SD boot:
...
| Info |
|---|
Note: The black rectangle represents the switch position. |
...
Connect an HDMI and micro USB cable.
Insert an SD card into the board.
[optional] Connect the MIPI camera to the MIPI interface.
...
Boot
Please refer to Serial Connection for installing the necessary serial connection software in Linux/Windows. You are ready to boot the board once you have installed the required serial connection software. Plug the DC power supply. The board will start booting, and you will see the boot log in your terminal.
...